What can I do with a cameo 4

#commissionsearned #silhouettecameo4 #thingsyoucanmakewithcameo4 #RDIdecals
In this video we show you how you can make car magnets with a cameo 4 and layering colors. Car magnets is one of the most sold items in our business and very profitable.
Our store: rdidecals.com
Affiliate links:
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3uy66jc
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Corner rounder: amzn.to/3JbJQzI
Oracal 651 vinyl 12x24 ft roll: amzn.to/46wUTMQ
Oracal 651 vinyl 24"x10 yard roll: amzn.to/3ulmXRJ
Reflective vinyl: uscutter.com/24-oralite-5300-...
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Siser Glitter Vinyl: amzn.to/3u1gnnO
Siser color guide: amzn.to/3ZuQJ60
Teflon sheet: amzn.to/3HvhRKx
Teflon pillow: amzn.to/3Sheqw1
15x15 heat press teflon cover: amzn.to/42gjt4i
Transfer AT75.1: uscutter.com/Rtape-Clear-Choi...

[@RDIdecals]

YOU MUST WATCH THIS EPISODE IF YOU PLANNING TO OPEN DECAL BUSINESS THIS 2023:kzbin.info/www/bejne/ZqSmd6xqicephac Our store: rdidecals.com Affiliate links: Graphtec vinyl cutter: amzn.to/3pIrIkS USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn CAMEO 4 (12 INCH): amzn.to/3uy66jc CAMEO PRO (24 INCH):amzn.to/3POgbNO Corner rounder: amzn.to/3JbJQzI Oracal 651 vinyl 12x24 ft roll: amzn.to/46wUTMQ Oracal 651 vinyl 24"x10 yard roll: amzn.to/3ulmXRJ Reflective vinyl: uscutter.com/24-oralite-5300-economy-grade-reflective-film Tape application roller: amzn.to/45apQGa Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow Magnum magnetics 24"x25' : amzn.to/3P6AHdJ Blank yard signs: amzn.to/2IBiGWM RAPID TAC: amzn.to/37ZMl5O Cutting mat: amzn.to/3uidBWZ Blue safety ruler (31 inch long) amzn.to/3slsrKy Squeegee: amzn.to/3bmZK8Q Small magnets to hold vinyl in position: amzn.to/3kdE6bt Cutting knife tool: amzn.to/3sbDTYS Adhesive remover goof off: amzn.to/3eXrNS2 Siser Glitter Vinyl: amzn.to/3u1gnnO Siser color guide: amzn.to/3ZuQJ60 Teflon sheet: amzn.to/3HvhRKx Teflon pillow: amzn.to/3Sheqw1 15x15 heat press teflon cover: amzn.to/42gjt4i Transfer AT75.1: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape

[@moniquesn333]

WOW! This is the best video that showed like 5 tools I had no idea that existed!!!!! THANK YOU! All the tools you used will be life savers!

[@coastalbendfreelancing]

Thank you!! Y’all explain things slowly so I can understand them and I’m going to give vinyl another trying because of your vids!!

[@RDIdecals]

Hello! Thanks for feedback, you should definitely give it another try 🤗. We wish you success!!

[@frkenhaave3524]

I’m a new subscriber and I just wanted to say thank you for your videos. They are very helpful to me! Wishing you a good weekend ✨

[@butterfly2385]

Cool, thanks heaps, great explanation...✌💜😁

[@elizabethlizzie1423]

I like it so much.

[@richardstokes7508]

Great video! I do have a request for an upcoming video: Price points; what do you charge and what is the profit?

[@IBEWelectronut]

Marvelous demonstration on how to make a beautiful sign. Great job. Love your patience; I need some of that. LOL Thank you so much for your tutorial. Shabbat Shalom.

[@RDIdecals]

Thank you 🙏

[@JasonBurgess-cb5hj]

Great video very informative and precise! Thank you!

[@RDIdecals]

Thank you 🙏

[@pamrodgers7409]

Thank you great work 😊

[@leviteapparel]

Wow 👌🏿 amazing work

[@lourdesgallegos7508]

Great, informative video! Thank you!

[@RDIdecals]

You’re welcome! Thanks for watching!

[@mugapa]

Awesome!

[@anthonyjackson7016]

very nice job👍

[@MIstastacks24]

Great vid

[@Paskoalee]

That's a very nice final product, but I guess it's too expensive. As you said, it's easier to just print the whole thing. It's easy to find a company that does that.

[@qayyumqoys562]

Nice rapid tac tutorial

[@TheThingsIdontUnderstand]

Thank you ^^

[@lovely31bluprint]

What's up you guys? I always like your videos and job well done

[@RDIdecals]

Thank you 🙏

[@bintfamily2571]

awesome info thanks. CAN YOU PLEASE do a quick TOP TIPS when cutting vinyl on the Cameo 4?

[@RDIdecals]

Thank you! We’ll keep it in mind for the future videos. We appreciate your support!

[@MR.MoneyMike520]

I know the video is quite old but can anyone help with using multicolor or layers, to RDI can you show a in depth video on the process of making the design and to cutting multiple sheets(colors) for one project

[@LHommeDeParfum]

Really awesome tutorial, clear and easy to follow. My question is: What determines the use of RapidTac? Surface? Temperature? Wheather conditions? Thanks

[@RDIdecals]

We use rapid tac when layering colors and to clean surface before installing a sticker and yes surface and weather play huge role when using rapid tac or any other wet solution we do not use wet method when applying on glass or wood only on metal or plastic and weather has to be at least 60 degrees if using rapid tac

[@LHommeDeParfum]

@@RDIdecals Thanks a lot. So minimum 60 degrees or maximum?

[@LouRao]

Wow! That was awesome. Excellent video demonstrating how to make magnets. Although I wouldn’t recommend any of the Cameos. Here is why. I had the problems and more using the Plus model. I had the Silhouette 4 Plus and returned it. Cameo 4 , Plus, and pro have WiFi issues, always disconnect. Reading the register marks failed often. If you don’t have good lighting the marks can’t be read by the machine. Software will crash often when doing test cuts, Windows or Mac version. When cameo does cut it will do it well. But, this isn’t often. The fact is Silhosette products are poorly made and the company knows it. It’s all about cutting cost. I will stick with Cricut Maker and Brother Scan & Cut 125e, best of both worlds. Yes, Cricut and Brother may of some cons but nothing to compared it by with all the issues Sihouette Cameo 4 has. You can accomplish this projects with Cricut or Brother and with less problems. So, would I recommend any of the Cameo 4 models, absolutely not. If anyone decides to buy the Cameo 4 I wished them best of luck not wasting time getting things to work in order to finish one project.

[@RDIdecals]

Well we had all people with all different experiences and everyone has theirs to share but cameo 4 is a good option to start with small budget but just like any other business you have to invest for better equipment later on and can’t say anything about cricut because we haven’t try it out ourselves.

[@arleneaugustahair8393]

The moment you mentioned the WiFi, I knew it had to be about the area you live in. I don’t think it has anything to do with the machine itself. I have the Maker and I have good times and bad times with it. I just bought a Cameo 4. I’m willing to try it out and learn the system. I love my Cricut Maker but I just needed another machine for the amount of stuff that I do.

[@dtmty]

did you know if I could sketch with cameo 4 directly to a canvas panel letter size of 2.5mm thick ? but is hard, not flexible. my intention is to directly skectch the canvas as preparation for oleo painting. and I have not seen any whose sketch something thick more than a paper...

[@fun2create]

Where do you get the blue safety ruler?

[@timheathcote9294]

Can you explain the importance of using rapid tack spray? Why not just rely on the stick of the vinyl ?

[@Manuel.Torres1]

Off an Amazon review: You can spray the surface before application of the label which prevents it from sticking right away and allows for proper placement. Once the label has been applied you can spray again to work out the air bubbles with a squeegee. It will not affect the adhesive once it dries. I used this product to apply self adhesive vinyl racing stripes on a mini cooper and it worked great. Gives you time and the ability to move the decal to get it exactly where you want it.

[@diananielson8495]

What I’ve noticed from his videos is that it reduces significantly the amount of bubbles left under the vinyl. It also helps adhere vinyl to vinyl reducing corners lifting. There are times they prefer using the dry method depending on the weather. This is what I have observed from their vids 😊

[@scottwombwell8223]

How do you set up your text and do the border around the numbers. ( I’m a complete novice with Corel )

[@RDIdecals]

we use coreldraw to do all that and send them ready to cut to our silhouette studio on PNG format

[@l31007]

You said printing is easier but I don't think printing ages well in the sun. Doesn't it fade as compared to the vinyl?

[@RDIdecals]

Easier in the way you don’t have to layer colors because it takes longer and of course both process have cons and pros and yes if you don’t laminate printed logos rain and sun will affect and will fade faster

[@MsNimfa1]

Would you recommend the Cameo 4 over a Refurbished 34" MH Vinyl Cutter?

[@RDIdecals]

Well to be honest we have never tested the MH vinyl cutter just the titan which I believe is made by uscutter but not the one you saying so I can not tell you but one thing I do can tell you is a good plotter for the price however if you planning to make car stickers or bigger signs I recommend the cameo pro which is 24 inch and you can get that through our affiliate store

[@youtubewisdom9333]

Where did you guys get the roll holder for the transfer tape?

[@RDIdecals]

Hello! You can get them from Amazon: amzn.to/3Kbd0P8 or Uscutter: i.refs.cc/5ByIPrp3?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo3NjAzMjU2NzV9

[@Hederrrcole88]

How do you stop the vinyl from moving around when you use it like this instead of the sticky mat

[@RDIdecals]

Hello! We’ve never had any problems when cutting without a mat, in fact we’ve never used it. Oracal vinyl has a backing paper that makes it easier to cut without a mat. Another thing is to align your vinyl when cutting long projects. Another tool that helps is the tape application roller. Thanks for watching!

[@ASURMlN]

there is a roller included in the little platform right in the machine, is there a reason you don't use that one?

[@RDIdecals]

We do in other cameo 4 videos in our channel

[@dandee28]

how did you cut those different layers of images out and how did you design?

[@RDIdecals]

We have a vídeo on how we split the different colors: kzbin.info/www/bejne/Y3rblnyrjM-ifdE

[@syltemodding]

what transfer tape are you using and where do you buy it can you link it

[@RDIdecals]

Hello! Here’s the link to it: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape/

[@terryw5500]

Whats the thing you got the transfer tape on

[@RDIdecals]

Transfer roller tape

[@AmitSharma-tp8qr]

How many prices this print Ed machine

[@monicabuhler1852]

How do you get people to find your products? Where do you advertise? Where do you sell?

[@RDIdecals]

In this newer video we explain all that you can do all this with cameo 4 kzbin.info/www/bejne/nnLGi3aYf9d2eJo

[@mariod9290]

DON'T FORGET THE RAPID TAC 😆😆 more RAPID TAC !!!!! ooohh more RAPID TAC ..... RAPID TAC .....RAPID TAC

[@RDIdecals]

💦🥴🫢

[@savatiaharmonies]

How were the layers created?

[@RDIdecals]

We separate every color in bitmaps or templates in software then add registration marks on each color to layer them

[@myvillage2088]

[@peteryawacheampong9791]

What is the price for a starter?

[@RDIdecals]

Hello! It really depends what brand you get. You can get a Cameo 4 and use silhouette studio for free, with materials and tools you are looking at less than 1,000 us dls but if you go for a Graphtec CE7000-60, you will need a vector software and with materials and tools, you’re looking at 3,000 us dls or more.

[@liamsobiam3834]

What’s that attachment called

[@RDIdecals]

TRANSFER ROLLER TAPE:amzn.to/3e1yYb3

[@Musicchordz]

Is this 12 inches Cameo 4 you use?

[@RDIdecals]

Yes the 12 inch cutter

[@Musicchordz]

Thank you for the quick response@@RDIdecals, I am from Philippines.