RDM6020V Standalone Marking System Installation Guide

  Рет қаралды 159

SHENZHEN RUIDA TECHNOLOGY LIMITED

SHENZHEN RUIDA TECHNOLOGY LIMITED

Күн бұрын

Пікірлер: 6
@sinequanon5592
@sinequanon5592 2 ай бұрын
I bought a new machine and it has a Ruida 6445 control card. I have *.rd files that I created on my computer. When I plug the usb disc into the machine. I have to copy them one by one to the Ruida memory. I can't copy them all from the control card. Only one by one. I click the download button from the RDWorks software. I can't select more than 1 file. I can't select files all together by pressing "Shift" or "Ctrl". Also "Ctrl+a" doesn't work. Even with a very old control card, when I plug the flash disk into the control card, I could copy them all to the control card memory with a single click. I was very surprised that such a feature is not available on a new generation card. And now I have to upload all my prepared works one by one with RDWorks or usb disc. It's a complete waste of time. How can I upload my *.rd files to the control card memory in bulk from the usb disc or from the rd works software? By the way, the names of my rd files are set to meet the requirements.
@shenzhenruidatechnologylim5388
@shenzhenruidatechnologylim5388 Ай бұрын
what's the file size? each
@sinequanon5592
@sinequanon5592 Ай бұрын
@@shenzhenruidatechnologylim5388 I have 100 folders (jobs). Each one has around 20 *.rd files inside. Each *.rd file is around 200kb. I am not sure if Ruida memory will be enough for all my jobs. Even if it is, since jobs need to be in the root directory, it will have to change the files with the same name. For example: "20x15.rd" file can be in more than one folder. I can't copy my jobs as folders to Ruida memory with a USB disk. Since it needs to be in the root directory. Similarly, I can't do this with RdWorks. So when I finish with 20 files of 1 job, I have to delete them. And I have to send 20 files of the other job. In short, all I need is to be able to send my *.rd files to Ruida memory in one go. With USB disk or Rdworks. And I never figured out how to do this. I can't select files in bulk. Neither from the control panel nor from RdWorks. If there is no easy way to do this. I will have to enter different names for more than 2000 files.
@sinequanon5592
@sinequanon5592 Ай бұрын
@@shenzhenruidatechnologylim5388 I have 100 folders. Each folder has around 20 *.rd files in it. Each file is around 250kb. The only thing All I need is to be able to send my 20 *.rd files to the ruida memory in bulk. Not one by one. It doesn't matter with a USB disc or Rdworks.
@sinequanon5592
@sinequanon5592 Ай бұрын
I have 100 folders. Each one has 20 *.rd files in it. Each *.rd file is around 250kb. All I need is to be able to send my 20 *.rd files to the ruida memory in bulk. Not one by one. It doesn't matter with a USB disk or Rdworks.
@shenzhenruidatechnologylim5388
@shenzhenruidatechnologylim5388 Ай бұрын
​@@sinequanon5592 Sorry, you can only upload one by one right now, already give feedback to R &D department,thanks for your advice.
RDM6020V Standalone Marking System Installation Guide
3:31
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 93
RDVisionWorks tutorial:Camera Installation#Large format control system#ruida6442g-dfm
1:10
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 1,9 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
RDWorksV8 tutorial : Mark Point Positioning
5:37
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 9 М.
RDWorksV8 tutorial #Hardware installation and debugging# laser control tutorial
5:27
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 6 М.
RDCMarkVision Tutorial Episode 1:Software Installation and Communication Connection
3:43
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 1,1 М.
RDVisionWorks tutorial:Controller installation#large format laser cutter#rdc6445g-dfm#ccd system
1:50
RDWorksV8 tutorial : Set Up Rotary Engraving
3:24
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 1,7 М.
RDVision Tutorial Episode 1: Hardware and Software Installation
4:22
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 3,2 М.
RDVision Tutorial Episode 2: Camera Calibration
6:47
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 5 М.
RDWorksV8 tutorial : Product Authorize, License Code Encryption
5:06
SHENZHEN RUIDA TECHNOLOGY LIMITED
Рет қаралды 557
RUIDA RDCMarkVision tutorial ep3:Mark Point Positioning #ccd#laser controller #visual machining
3:37