Reacting To The Daily Mail UK Hit Piece

[@mtnbkr5478]

I honestly believe these articles do a better job at promoting 3D printed arms than they do at scaring people into avoiding printing.

[@PatrickRatman]

they serve their purpose for them though: propaganda to keep the people that already have a negative bias of guns scared and to minimize potential support of 2A rights.

[@mtnbkr5478]

@@PatrickRatman That may be a good point. It's a British publication right? I can't say I have a deep understanding of their culture or any exposure to the types of propaganda they may be exposed to regularly. In the US however, even people who want gun reform and aren't completely settled on a full ban, I would think should be able to see through it.

[@tiezine9583]

The only people scared are the ones writing the laws and the articles LOL. The rest of us.. are quite determined to stand our ground.

[@vevenaneathna]

this was cody wilson's main point if you read his book out now.

[@emanuelsharik2853]

that’s what the news do aswell when they talk about glock switches, they tell people how much they cost and where to find them

[@StabbyMcStabwood]

Freedom is scary, deal with it.

[@Scaliad]

Personally, I prefer dangerous freedom to peaceful slavery... May the "criminals" prevail!

[@willnismo8324]

Seriously.

[@AMO17]

Woop, there it is! Couldn't have said it better

[@mtnbkr5478]

Succinct. I like it!

[@mattlinville5539]

No This is the gaybourhood AHHHHAHAH

[@TheSquizzlet]

They use the word "Criminal" because to them, a criminal is someone who does not want to be controlled. They're not talking about burglars, murderers, terrorists, or other maliciously dangerous people. They're talking about innocent people who want to be defensively armed. That makes you a "criminal" because they're using the word with their definition, not the real definition. It's an overton window shift, cultural gaslighting, astroturfing, whatever you want to call it, but they're trying to replace the common dialect with their own cherrypicked version. Classic Orwellian techniques.

[@DKFX1]

Decentralized additive manufacturing is like kryptonite to these control freaks.

[@speakersr-lyefaudio6830]

Freaks is definitely an appropriate descriptor.

[@israelCommitsGenocide]

kryptonite would be if people stopped paying taxes, they still own you.

[@nobodynoone2500]

RIP JStark. The signal is self amplifying.

[@nickloven6728]

I believe he died from a heart attack as much as I believe Jeffrey Epstien killed himself.

[@mikehorn7099]

I find it very funny how the article refers to him by "Jacob D". They probably didn't want to use his Kurdish last name, or mention he comes from a Kurdish refugee family because it doesn't fit the "gun printers are neo-nazis" angle they are trying to go for.

[@The_Privateer]

I'm diggin the broadening of scope of your videos. I still primarily love your content based on physical properties of of different plastics - but it's all good man. Love it!

[@pennyformythought]

indubitably

[@rachaelkatz6310]

Woman happily 3D printing gats in da house 🙋‍♀Getting ready to ECM my first barrel soon!

[@mrfawkes9110]

Good on ya. Love hearing about women arming themselves.

[@MichaelJones-ms8sx]

I better keep this short, as all my bandwidth is reserved for my HUGE "blueprints" I'm downloading... Great work Tim! Thanks for all you do!

[@cvabuck5489]

It would be nice if they covered Burma where freedom fighters are using the FGC-9 to fight the military Junta that took over democratically elected government.

[@Schmoogie]

In all fairness, it's the Daily Mail. They're basically the most boomer "news outlet" in the UK and aren't really going to do anything more than promote the same bullshit that old British Tories like.

[@menacingdonutz]

Hey now, they’re busy making innumerable false claims about 3d printing and the 3d2a community. We can’t have any positivity in the article about people using this to fight against tyrants.

[@mrfawkes9110]

J Stark's vision taken to its logical conclusion.

[@speedyd8150]

I still haven't figured out if these people are truly scared or if it's just propaganda to try and scare the masses. I've only been scared a handful of times in my life and a gun has never been involved. To be honest, it's quite the opposite when a gun is involved. It's a great equalizer and wether it's in my hands or the hands of a loved one, I know we stand a better chance of surviving any situation that could arise when we're armed.

[@huwhitecavebeast1972]

Propaganda meant to scare idiot leftists, their main audience.

[@MikeJones-mf2rt]

I’ve been on the receiving end of a random group ambush, just being in the wrong place at the wrong time, had a gun to my head and front teeth broken by a pistol whip. Honestly, it’s not scary at all in the moment, just pure adrenaline. The scary part is afterwards when you realize how easily your life could have just ended.

[@dark2023-1lovesoni]

​@MikeJones-mf2rt I've had to shoot an attacker before in self-defense, something I always emphasize is basically exactly what you said about feeling nothing until the adrenaline wears off. That's why I find it a bit silly when I hear people questioning if they could really kill someone if they had to. In the heat of the moment, you wind up acting faster than you can really process, when your focused on surviving there just isn't time to really feel fear/anger/hesitation/etc... You wind up having to sort that all out afterwards, once you're safe.

[@Lifesbeengood]

What gets me is these articles say you can make an entire gun from 3d printing, not mentioning the fact that you still need metal piping for a barrel, and you can’t 3d print that. You can’t make an entire gun from just a 3d printer. You still need quite a bit of materials

[@earlymorninglizard7061]

On top of that they later go on to say that you need a metal barrel, firing pin and other parts. This article trips over itself more than once and I'm not sure if it's hilarious or terrifying.

[@Lifesbeengood]

@@earlymorninglizard7061 yeah when I made the comment I wasn’t all the way through the video lol, but yeah caught that. The article was dumb af

[@earlymorninglizard7061]

@@Lifesbeengood He at least got a few things right, but I guess it wasn't scary enough giving just facts lol

[@pyrobreather1]

FGC-9 is probably the closest we will get with conventional ammunition.

[@Tony-om5kr]

Actually, it's possible to 3d print all the parts, but it's not economical for regular folks. Laser sintered additive manufacturing machines can 3d print steel, 17-4PH, and other metals, but they cost a bundle of bucks (multiple $100k). Some 3d print company did a one off print of a 1911 frame, slide, barrel and all the other parts.

[@lezanderson1236]

The UK, (where I live) has some of the strictest gun laws in the world....yet gun crime in inner cities is rampant, as is knife and machete attacks. It's just 'Normal' now to hear of people being hacked to death or shot in broad daylight in a town or city ?? Back in the 1960s when it was quite easy to get a gun..(You didn't need a licence or background check to own a shotgun) , gun crime was quite rare in the UK !!

[@killerskincanoe]

Shocker. Everyone gets respect when everyone has lethal power. Go figure.

[@DownBadDonk]

Getting worse everyday

[@Leviathan3DPrinting]

He was using a Luty SMG (made of metal not plastic) they found a printed (unused in the attack) reciever in his home. No 3D printed firearms were used in the German shooting as far as I could tell. Obviously that's not how the media spun the story.

[@backyardchoppers4571]

That black derringer is called the repringer pepper box. Calibered at .22lr with stainless barrel liners. I’ve made one in pla plus with resin grips and it’s pretty good you can get it in the defcad reprocitory

[@RekzysTheTitan]

I live in England, if I want a gun I can walk down my street and talk to a guy called Lazlow, he usually does drugs but he's been known to dabble in soviet era firearms.

[@ChucksSEADnDEAD]

Thank you Lazlow for depleting Russia's stockpiles. lol

[@Razor-gx2dq]

Ok then, I just wouldn't be telling people

[@JBO3022]

​@@Razor-gx2dq Its a movie reference.

[@StabbyMcStabwood]

How dare this writer *ASSUME OUR GENDERS* that's like a hate crime in the UK

[@HoffmanTactical]

He assumed a lot.

[@savvygood]

Yeah! What about all the non-binary 3D gun printers?!

[@HoffmanTactical]

@@savvygood There are a lot of them.

[@smorrow]

Nah, gender shit is exclusively North American

[@StabbyMcStabwood]

@@smorrow I know for a fact that's not true.

[@918_xDx]

you can find blueprints/schematics to firearms, tanks, jets, rockets, cannons, catapults etc. at a public library using the card catalog and remembering the dewey decimal system.

[@HoffmanTactical]

Not my public library :(

[@ChronoTango]

"Blueprints" sounds more sinister than "models/meshes." Blueprints refer to something very intentionally drawn out, accounting for every detail. In this context, they are trying to make it sound like something very intentionally evil in its creation and proliferation. Nevermind the fact that it carries no intention, which is very much the same for gun ownership.

[@nra4ever2011]

Damn they got Master Chief over there running the streets of London apparently lmao. That fuckin 3d printed Magnum prop stock photo killed me. "Cortana what is a chav?!"

[@ArcturusOTE]

Man do British media have no other crises to cover, like whatever Chucky is up to, or some rant about their ruling party?

[@bakedandsteaked]

I think they're still mad that they were BTFO'd during the American Revolution so this is their way of trying to get revenge and attack the Constitution or something

[@jakegarrett8109]

Excellent breakdown Mr Hoffman, thoroughly enjoyed your perspective. My favorite was probably the "high internet bandwidth", oh yeah, the 20 MB file on a USB stick you download 1 time for as many machines and uses as you could want, yeah that's a lot, but video games with day 1 patches are practically nothing... LOL!

[@briansmith292]

It’s awesome to see young men and women stand for freedom and carry the torch passed down through 247 years of history. Keep it up and keep the faith and thank you for being great Americans!! 🎆🎇

[@SavageFoxProductions]

Nothing is a crime unless there is a victim

[@legomovieman2]

Hey Hoffman, as a Brit the DailyMail and the British people in general hate guns with a passion, I cannot describe how depressing it is being a 2A enthusiast how much my people hate guns, hate self-defence and hate independence from the Government and Dole. Basically if you're American bully Brits into getting guns

[@HoffmanTactical]

I understand how a media organization with an agenda can hate guns, but I just don't get how people can be that way. Especially in a country with such a rich background. Sad.

[@legomovieman2]

It's a multifaceted thing to break down, you could blame it on Dunblane, the general lack of exposure to guns in general irl outside of sensationalist news like this, that and our gun groups are vangaurdists who hate new people coming into shooting, even worse some Clay shooters I speak to *actively* fight to get guns banned and dissuade new people from getting SGCs (Shotgun Licenses) If you're ever invited to the spook cast I'll see if I can slip in because it's fascinating honestly.

[@huwhitecavebeast1972]

I don't understand the British fascination with destroying themselves.

[@huwhitecavebeast1972]

@@legomovieman2 Jesus, no wonder you are getting taken over. I saw that the 3 biggest cities in Britain are all majority foreigner. Minority white British. That's scary.

[@DKFX1]

@@huwhitecavebeast1972 You think it's any better in America or France?

[@9dipstick6]

This react was BASED! Good stuff!

[@terbospeed]

And 3D printer sales sky rocketed!

[@NoahJohnson7452]

And you get put on a watch list when you buy them

[@terbospeed]

@@NoahJohnson7452 That watch list is preggers now, but nobody cares!

[@sierraharvester]

When the mob starts yelling “burn the witch” and looks in your direction, time to use that gun to defend yourself.

[@MoJosMojo]

Guns bad said by a person who has never touched a gun.

[@allenrm100]

Also often said by people surrounded by people with guns

[@playmaka2007]

"I guess if you're british and don't know what 'cool' is maybe it looks scary to you" XD

[@Patrick-857]

The bit they forgot to mention is that it's extremely difficult to make a 3D printed gun outside the US, because in the US only the receiver/frame is regulated as a firearm. Most other countries regulate ALL of the parts.

[@HoffmanTactical]

Hence why the FGC-9 is so popular.

[@dark2023-1lovesoni]

Most other countries regulate "pressure bearing components" like the barrel, bolt, etc... Though Luty proved you can make an open bolt SMG pretty easily with no standard gun parts, and that was decades ago.

[@Patrick-857]

@@dark2023-1lovesoni With the advent of DIY EDM machines using 3D printer and laser engraver parts, that's even easier. Funny, it's suspected, although not confirmed, that FX Airguns is using EDM to make their barrels. A very high degree of accuracy is possible, with the part never being in contact with tooling.

[@Razor-gx2dq]

@@Patrick-857 the ghost gunner is great for CNC stuff

[@agentoranj5858]

@@Patrick-857Still no easy solution for ammo, especially primers and propellants.

[@tedh7543]

Excellent commentary Tim. This author is obviously delusional with no sense of who is actually 3D print guns. It's a huge community that enjoys doing it and wishes no harm on any fellow human outside of defending ourselves from those who wish to do harm to us or other innocent people.

[@GlassFilledCrunchWrap]

Shouts to Hoffman. I really like this vid format, and message. I'd like to see more of it on your channel. Also appreciate the built in supports haha.

[@Pewtiepie1]

The moment an idea (file) can get you placed in a cage is when you find out that you are outnumbered. Adding pressure will only create more ideas.

[@johnbud3809]

Without privacy there is no freedom

[@gifthorse3675]

Then we have no freedom

[@anon-1776]

SUPER BASED!!! So glad you're a part of the wonderful community, keep up the excellent work👌.

[@scootersinc9480]

Rip j stark your commitment to freedom will go on even though u can not and your sacrifice will not be taken for granted

[@beartankoperator7950]

PSR looks cool and is in part doing it in homage

[@JaykPuten]

13:52 They make the joke that Americans will use anything but the metric system (two fridges in a road come to mind) and yet he says a microwave when he could just use the metric system there... I mean saying "about half a meter cubed" would work just as well.. Or as Hoffman says... A darn picture... He has access to a stock library

[@deeno313bababa]

Great work always Hoffman tactical!! R.I .P j stark

[@macnayarms]

Nice, concise and succinct with your points. I really enjoyed this reaction video 👍

[@kenh6096]

Thank you for making these videos. I have subscribed and looking forward to seeing more of your content. Incidentally in Australia they have gone way past gun control and outlawed body armour to the average public.

[@RekzysTheTitan]

It's honestly annoying that these people think they speak for our entire country.

[@ftnavy123]

Love this. How to take down the riduclous laws proposed in New York in 40 minutes.

[@_bollinengineering_7179]

UK is way beyond Orwells dystopia

[@triple7988]

Ah yes, computer aided CAD... Know throughout the industry as CACAD or "kuhcad".

[@Shep01]

Most people don't remember but when PSR started up he had a debate on whether or not he should wear the mask.

[@GuitarGunner]

Thanks to this video & the referenced Daily Fail article I found out about some new builds I haven't tried yet!

[@Aaron-fh6hd]

No/Lacking knowledge of firearms: *Inconsolably terrified of guns* Firearms educated: A healthy respect for firearms and their practical applications

[@thelastminuteman7513]

"Jstark died of a heart condition during a raid" Yeah a bullet will give you a heart condition real fast.

[@shootlearnshoot8144]

This freedom loving gun enthusiast thanks you for what you do. Keep it up! You should consider partnering with Warrior Poet Society. You share common goals, but you have a different approach through dispensing 3d printed freedom.

[@bigfootgoesboom]

I love hearing the printer running in the background

[@andrewmattiewalter]

Tim is great, and I feel like he's hit his glow-up finally lol

[@freshcharge]

I have a fire extinguisher and flame retardant clothing, is that scary?

[@ChucksSEADnDEAD]

"Just call the fire department 🤷‍♂️"

[@Schmoogie]

The UK has a bit of its own history of homemade firearms, so it makes perfect sense that the Daily Mail would run an article like this. They're almost always the voice of the establishment.

[@belligerentinstigator944]

The King's Subjects do not have a right to criticize free men.

[@MOOBBreezy]

The gun at 15:10 is the "Pentagun Derringer Pepperbox 6mm" by franco. This is a design from 2020 or earlier

[@madrenwillims4391]

I am a proud american woman in the 3d2A community. They lost me when they overgeneralized/oversimplified things

[@HoffmanTactical]

We print.

[@allenrm100]

Bravo Hoffers, bravo!. Stay free my American friend.

[@paintballercali]

Well I'm converted I'll be tossing all my guns in the trash.

[@HoffmanTactical]

No, No. the lake. It's much safer, and approved by experts in the field.

[@paintballercali]

@@HoffmanTactical do plastic guns float?? Now I'm curious.

[@creightonleerose582]

I've some Outer Inlaws there in Bournemouth/Poole Englalaand. Everytime Im visiting there or trapesing the European mainland, I tend to go out drinking nightly for some odd reason? (Although I pretty much never drink @ home here in the states, can go a year w/o one beer, or sip of sometimes)...I call it the 'Euro-Effect'.... -Its so funny when chatting up Brit lads in the bars, 96% of the time the 2nd question outtve their mouths after name-O's being: "Sooooo, Do you own any gons?" The look on the faces when I respond, "What Kind?"..."What Type"....& "Oh, Not Really All That Many" ('Not That Many' being a subjective, or relative term to us here) Q: "Do You Own Any AR15's?"....... A: "Yeah, Around 10+ with full component parts to construct two more full ones, allsortsa barrel lengths, rifles, carbines pistolas, six+ 5.56 cal, two 5.45x39 varieties & a few odd 7.62x51 AR10 308's" (Coming from a guy whom used to make fun of people that owned say more than three 5.56 ARs...OOPS!..HA!) Q: "!?-MAKE GONS AT HOME-?!".... A: "Yup, right 'ere in the 'relative safety' of my own bedroom, or nearby Art n' Ammo Manufactorum Alembic Chamber" ~STRANGE what our 'Normalcy Biases" consist of form nation to nation, even state to state eh? (-GREAT WERK(S) Mr. Hoffman, Greets from all zee WhidBillies from Whidbey Island, WA;)

[@cerberous5509]

Great video mate. Also a small note on the synagogue shooting, that was not a 3d printed gun at all. It was just a super old lutty design that had been around for years.

[@twezi]

wrong. he had two lutys as one had a printed lower

[@twezi]

preview.redd.it/680m3by0hpq91.jpg?width=768&format=pjpg&auto=webp&s=28966d1b468f281ac8ed58f95072faa2b775983c

[@twezi]

the one he used for the majority of the shooting was the metal one though

[@swc2001]

We really appreciate everything you're doing! Very good and measured response to the article. Here's the thing I really wonder about... In the UK are they able to purchase the other necessary parts to actually produce one of these firearms? I mean are they able to just pop onto Palmetto state Armory and buy an LPK, bolt carrier, and upper? Are they able to buy ammunition for said gun? I somewhat have my doubts. Also can they just pop down to Walmart and pick up a box of 5.56? I dunno. I have a limey friend.... I think I will ask him. Will let you know. Thanks again!! Ps..... This is also engineering fun stuff.... It's not for nefarious purposes.... They just don't get it. 🙄

[@josephvanas6352]

No they cant, the UK controls basically any pressure bearing component so bolts, barrels and the like I cant speak specifically to the UK but in other European countries you can buy a full auto m16 lower as it is just a firearm component and not controlled as a firearm unlike in the US. Similar to how a "full auto" bolt carrier would be here.

[@jakegarrett8109]

@@josephvanas6352 Lol, migrates to UK, buys "parts", goes to US with good parts (or vice versa). Since they are totally backwards, I'm sure no trades or exchanges of parts have ever occurred.

[@johndeaux3703]

In the UK it's 'Ye Olde Palmetto Village Armoury Shoppe'.

[@rangerriggs5066]

Its hilarious that theyre so worried about 3d printed guns and how easy it is to get, while anyone can buy some metal pipes and crudely machine one.

[@meismyself1812]

Thank you for your Attempt at reacting to this from a non biased perspective

[@HoffmanTactical]

Oh, this was very biased!

[@meismyself1812]

@@HoffmanTactical...Still Love and support you 100% of the way hope u get that inventory up so I can show u just how much I support you lol

[@JohnSmith-ig6sb]

Another fantastic video!

[@250smacks]

Thinking of starting a business selling ender 3s with files already sliced on the sd card along with a calibration cube and documentation of how to calibrate and build that particular gun. The consumer doesn’t have to download anything and stay anonymous

[@forestnfren8146]

i hope you got a lawyer my fren. You're doing too good of work to not be attacked by institutions

[@lulumolina755]

print shoot repeat? come on that guy is a hk nerd the news need to stop calling him a criminal he only prints pink guns with a fluffy ball keychains 🤣🤣🤣

[@Akilles3]

Madness?! This is not madness...THIS...IS...SPARTAAAA!!!

[@spamspasm8183]

I'm not a gun person. I don't own a gun. Chances are, I'll never own one. I like guitars and I own several 3D printers. So I 3D print guitar stuff and I've 3D printed a guitar as well. I already own a guitar and a 3D printed guitar is cool for me. People that will most likely 3D print guns are gun people who already own guns and love guns and will probably think 3D printed guns are cool. This makes sense to me. A gun amateur will probably never 3d print a gun. If they do, they will mostly likely hurt themselves before other people. As for criminals, well criminals will be criminals and will probably resort to more reliable and "easier" to procure weapons. For that small intersection of criminals who actually love guns as a hobby and are interested in 3D printing, well they will already have guns anyway so what does it matter?

[@dragonmouse3985]

A people practiced in the responsible possession of firearms are able to defend themselves, their families, and their communities. As such, they consider themselves to be most responsible for that protection, and possess a feeling of community and security that comes from being capable of protecting themselves. This is known as the spirit of independence. It is product of self-reliance. Those peoples who are denied the Right have none of these feelings. They are dependent on police, on military, on a strong-man style of protection, they are dependent on the government for every form of aid and protection. Like abused and wounded animals they become suspicious and distrustful of others, insure in their powerlessness. They are dependent on government for all security, and as such, are terrified of anything that may represent a power that can oppose the absolute authority of the government, and become resentful of anyone or anything that does not hold such a dependent status. It is for this reason that the debate about the Right to Bear Arms and its execution is actually about the core organizing principals of society, and the attempt to shape the thoughts and minds of those who make up society. It is about popular sovereignty, the question of who is sovereign and from where does that sovereignty originate. And it is for this reason that gun control is at its center a core tenant of authoritarian ideology, a must win for the socialist agenda, and a target idea for thought control. This is why it is a target of ridiculous censorship, because everything that makes gun look or feel like there is something bad, wrong, peevish, or extremest about gun ownership or gun culture, is a sociological win for socialism, because it is a movement towards a feeling of dependence, where by security is a product of state subordination, rather than a self-generating condition generated by a people who have the mindset of independence, produced by being responsible for their own protection. 3D printing of firearms is one avenue of solution, as it adds to ease of ownership of the means of protection. As gun control strives to make firearm ownership more and more expensive, thereby robbing more and more people of the means of self protection and making them more dependent for their security, and more and more afraid of those who are not dependent, such solutions of this are a powerful too to keep the price of gun ownership down, and keep the accessibility of firearm open to the public. Long live the Saturday Night Special, long live the humble shotgun. Lift the import ban on non-sporting weapons. Long live 3D printing. Make Firearms Cheap Again.

[@fredshorrock377]

Ag off grid entered the chat. " ony men you say? "

[@dylandean1950]

You’re a very good and entertaining commentator

[@jth_printed_designs]

"Maybe if you're British and dont know what cool is" haha throwing some shade at the redcoats

[@IHamDogg]

thats the OG Halo Pistol. im sauced rn. >_

[@MozambiqueEnjoyer6097]

Bruh, ain't no way 🤣🤣🤣 Mans got the Doohickey.

[@johndeaux3703]

i'm scared. hold me.

[@viperbuzzard01h84]

15:13 huh i didn't know someone made a pepperbox gun, nice!

[@texas66]

Taking Daily Mail logic to the extreme the components of a forge should be banned because a "criminal" or "extremist" could make a knife blade over 1 inch (25mm) long in their garage....

[@NeygaFaygoot]

Badass and scary are the same to a tyrant

[@leadbullet1]

thank for what you are doing

[@MakeItUpAsIGo]

The thing thats funny, guns arent even the most efficient way to dispose of living things lol

[@DreadPirarateAndersen]

I am a Dane, and I can print my own gun, as long as I have permits to own a gun, and permits for buying and assembling parts to fabricate a gun from scratch, but it is just as easy to get, as a permit to buy one, ready made, to get. and all I have to do, is, register it with the government as soon as it is built. that's all. Any UK citizen would be able to do the same, and the printed frame would be just as "Illegal", as one, ready made, bought in a sporting goods store, so they are even lying about the legality part, in the beginning...

[@Ataraxia_Atom]

"so only terrorists wear body armor, tell that to the military" i don't think that's exactly the own you think it is 😂

[@rodjava]

You are so right, Sir

[@natemiller6389]

Keep spreading the faith my man. Don't stop until there is a 3d printed gun in every home across the globe ;) you know if you wore shoes they wouldn't think you so crazy right? cause that is just nuts my boy lol

[@mobilegamersunite]

3d printed guns are not for criminal use ....YET! 😳

[@hooliganonepercenter4277]

Well spoken Tim

[@joshuabeard9881]

Great vid, you should post more reaction stuff. but btw it's not a crack on the plastikov. The v3 has a wider section in the rear with a steep ridge that's hard to see from that angle.

[@HoffmanTactical]

Thought there was something I was missing!

[@theycallme_nightmaster]

28:33 I believe Ivan is secretly the CEO of 3D printed guns

[@bullwinklebrown283]

The “terroirs” already have the aft 2goFast3fearrious 😂

[@jasonwilson9207]

a little sexist of him if the article was on another subject there would be outrage women are just as good at 3d printing as men

[@Eluderatnight]

Don't notice "misogyny", "right wing", "nationalists", "supreemes", et all. As a hammer to beat down whoever they don't like.

[@What..a..shambles]

Its a hit piece.. jealous cos he has no NoDs!😂

[@dnelson1676]

Hey hoff know this may be late but why don’t you board swap your printer to get quieter steps when the motors are run? If that’s a separate shop that’s further away from where you spend most of your time I understand. If you do boardswap, you have the ability to nick pick your firmware to enable a myriad of options that weren’t accessible before.

[@yyungreppin5225]

Those damn Fully semi automatics

[@MooreAnalytical]

How much misleading info do you think they will have in one article haha

[@evil_me]

You can count at least two woman that are into 3D printed firearms 😉

[@denveradventures589]

And one trans person also

[@HoffmanTactical]

Two?

[@evil_me]

@@HoffmanTactical wife and I, that seems to add up to the total of two 🤣

[@Muffffin]

we are all at least mildly autistic

[@denveradventures589]

Alexis guns on odyssey

[@daltonrogers5483]

I slap it with my left I slap it with my right I slap it when I see it always gets me hard

[@ianfarquharson3772]

I love it how at the end they say that actual criminals use regular weapons😂Here in England you'd have to get stuff like slide,trigger group,barrel,magazine and ammo illegally,so people will pay that bit extra to buy an actual factory made gun. The old bill will nick you for doing both,so no point in taking the risk things don't go bang when they need them to.ThankQ.TkEZ>UK

[@Reindeer-ry2lf]

Aha can't extinguish the signal 📶, keep the signal going strong 💪 ✌️ 👍 🇺🇸 😎

[@rod4309]

i've always thought that it wasweird how they demonize body armor... something with the sole purpose of saving lives.