ReadyLift 3.5” SST Lift Kit Install/Review For 2017-2022 F250 Superduty Trucks

What’s up everybody. In today’s video I will be
Installing a ReadyLift 3.5” SST Lift Kit on my buddies 2017 Ford F250 Lariat Powerstroke. Overall, this kit was packaged very well, all the parts were quality made, there was a full color installation guide with pictures, the install was pretty easy overall and took me 5-6 hours. With a little trimming to the front bumper he is now able to clear 24x12 wheels and 37x13.5 off-road tires.
ReadyLift 3.5” SST Lift Kit for 2017-2022 F250. amzn.to/49fFfrf
---------------------
www.amazon.com...
Disclaimer: Diesel Legiance is a participant in the Amazon Services LLC Associate Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenue by advertising and linking to Amazon.com.
Please like and share this video as it truly helps me out and helps my channel grow. Also, please feel free to leave a comment and let me know how I am doing or if you have any questions or suggestions? If you like what you see, please subscribe to the channel as I am always posting videos on a variety of content. Click that notification bell as well so that you will always know when a new video drops.
Follow me on Instagram @Diesel_Harm & @diesellegiance
To show further support for the channel, please visit www.diesellegi... and pick up a t-shirt, hat, decal, flag, etc. Your support is greatly appreciated.

[@jcarter0007]

One of the most thorough and to the point install videos I’ve ever seen, fantastic job on the truck and instructions. I applaud you kind sir!

[@DieselLegiance]

Thank you 🙏 always appreciate the feedback.

[@matthewprince7704]

Great video and I really like how thorough and informative you are about the install. Really awesome looking truck. Perfect setup Great job.

[@benjytheframer2781]

Me again also on the front bumper i used 1/2 in washers and i got some longer bolts from homedepot cheaper than buying a spacer kit, so i spaced the bumper forward and added more washers to the bottom bolt and that thilts your valance just a bit so you dont trim it in a way that its in your face also you can try heating the valance and bending it just a bit for more clearance other than that i loved this video :)

[@glennblum6410]

Great video. Truck looks good with the 37's.

[@benjytheframer2781]

I installed the same kit on my truck the only thing that dont work is the 4 in tapered block on the rear, that block makes your drive shaft vibrate, because it changes yout pinion angle, and the truck looks kind of leveled but when you look at it from the back it looks squated, so i ordered a 5in square block from pmf and that solved the problem and am happy now with the way it came out, well exept that when you order the block i failed to order a shim that lets you move the block bqck and forth so you can center the wheels on the fender if you guys go with that i suggest you get it, also i spaced the bumper forward and trim the fender a bit nothing crazy but i was able to fit 35x13.5r22 tires on 22x14 - 76 on there also you will need longer U bolts those i cant remember the company i order them from but i order them a bit longer in case i want to run traction bars down the road

[@brianjones864]

Thanks brah

[@MIHfishing]

Crazy you had to trim my boys run 37s on 2.5 level kit no trim

[@DieselLegiance]

Depends on the tire size. These tires were 37x13.5.

[@alexdimarco4044]

What’s the fender heights from the ground after a 3.5 lift

[@ajcoker]

how do you rotate the axle to get the front top bolt of the radius arm back in

[@ajcoker]

never mind, 3 hours after commenting my question i realized by rotating axle you in fact did not mean rolling the axle 🤦‍♂️ rolled it a tad an it slipped off the jack an hit the concrete

[@ajcoker]

but we’re back in business. moving on to the next part of the video

[@SlaterMade]

Will this kit work on a 2WD 17 Lariat?

[@DieselLegiance]

It should…as long as it’s an F250/F350

[@SlaterMade]

@@DieselLegiance for a rear wheel drive? Only reason i ask is I am not finding much online for a RWD 17 lariat.

[@SlaterMade]

truck looks good btw

[@shiminliu2010]

what is the wheel offset?

[@Painfulwhale360]

A whole dang lot. Probably the only reason they had to trim the bumper lol

[@juantootri2721]

What size wheels are those?

[@DieselLegiance]

24x12 on 37’s

[@juantootri2721]

So a 6in shoukd clear 26x14 on 38s huh?

[@DieselLegiance]

It’s gonna be tight and require some trimming of the front bumper (cutting the corner on an angle) for clearance at full turn and bending some wheel well metal a little at the back of the front wheel for clearance but it’s possible.

[@juantootri2721]

@@DieselLegiance 10-4 thank you