WPL C14 370 Motor/Metal Gear Transmission & 9g Servo Install

[@WATCHMEGOBROKE]

Just got a Cr24-1 KM and An RTR for my son. This video was super helpful thanks brother! I had no idea there was a whole WPL community! Thats awesome

[@johnlaurens5252]

just told my friend who loves rc about your channel he watches you all the time now

[@ReadytoRunRC]

Awesome!! Thanks for the shout out to your friend.

[@creativeexperience6388]

This helped so much I spent 300 bucks to build a wpl inspired bouncer with the all metal cj bouncer body you can buy

[@wvflying1626]

You make it look so easy, tear it down and build it back. Pretty dang cool.

[@ReadytoRunRC]

Thanks! Sometimes it’s a little frustrating especially when I don’t get all the hardware included with some of the upgrades. To me, tearing down and rebuilding is almost as fun as actually running the rc.

[@RustydriftRC]

Great video! I love the WPL trucks. Stock, they are a bit cheesy, but the upgrades are awesome an relatively cheap. The upgrade process is half the fun with many RCs.

[@ReadytoRunRC]

Thanks! You’re absolutely right. They aren’t much but it doesn’t take much to make them a totally different RC. I love the whole taking apart and putting back together.

[@mraltoid19]

Dude, I wish I came across your video before I fumbled with mine. I had the EXACT same issue with the wrong servo-tray listing on Amazon. AND it had the wrong screws too! It was a mess, and like you I had m2 screws to use. That looks great man. Keep it up!

[@ReadytoRunRC]

Thanks! Yeah this build has been disappointing for how many times I had to put my own hardware in that wasn’t included with any of the upgrades. I’m liking how it’s looking and can’t wait to get it done. The waiting game for the next step is not fun.

[@rekik66]

Great video. That rc seems very intricate.

[@ReadytoRunRC]

Thanks! It can be.

[@MightyistheRCGamer]

It looks like it's coming together and it is going to be a beautiful little truck after all the upgrades you put on it

[@ReadytoRunRC]

Thanks. I need to get working on this again. I been slacking on content. Winter is being rough right now and takes away my motivation to make more videos.

[@MightyistheRCGamer]

@@ReadytoRunRC it's okay because you have a TON of great video's anyways

[@ReadytoRunRC]

@@MightyistheRCGamer thanks. Appreciate it. I’m uploading one right now for 6k subscribers. Should be live in about a half hour.

[@MightyistheRCGamer]

@@ReadytoRunRC I still tell people about your channel not because I want you to do the same because your channel really is good clean family fun with so good video editing

[@ericsrchobby5180]

Great video, really enjoying this build👍

[@ReadytoRunRC]

Thanks! I am liking where it’s going. Glad you are enjoying the build.

[@IowaBudgetRCBashers]

This is pretty much exactly how I’m gonna build my c14

[@ReadytoRunRC]

Sweet. It’s a really easy mod to install. Good luck with your build!

[@IowaBudgetRCBashers]

@@ReadytoRunRC just did the 370 mod to my B36 6x6. Really made a difference

[@ReadytoRunRC]

@@IowaBudgetRCBashers that motor has so much torque. I was climbing so much stuff I couldn’t climb running the stock motor.

[@growingrcs]

Good looking wpl man!!!

[@ReadytoRunRC]

Thanks! I’m working on it now and it’s working pretty good.

[@Lee-At-Green-Pheonix-Rc]

Love these motor and I love them servo and mounts I have in on my 6x6 5kg dump, 4x4 semi tractor unit and I hqv3 5he 370 motor in my lowboy trailer 5o power the axles that hooks into my 4x4 semi to work in tandem

[@JackOnly21]

Nice video, really helping

[@ReadytoRunRC]

Thanks! Glad it’s helping out.

[@ramsessilent]

looking beefy!

[@gargermaxpower2408]

Nice! Just a question: is the stock plastic transmission of the C24 more robust or at least equal to the MN82 (also stock plastic transmission)?

[@ReadytoRunRC]

@@gargermaxpower2408 I know nothing about an MN82. Never had one, never looked into getting one, and never researched anything about them.

[@gargermaxpower2408]

@@ReadytoRunRC Thak you very much!

[@DelawareRCMan]

Hey man how are you? Sorry I been MIA for quite a while now. It’s been a hell of a time. Trying to get back to normal but it’s just going a little slower than I thought! Love the videos!

[@ReadytoRunRC]

I’m so glad to hear from you. I have been wondering how you been because I haven’t heard from you in awhile. I hope you can get yourself back to normal and things speed up for you with your recovery.

[@rcshandmell4276]

Great video

[@ReadytoRunRC]

Thanks for the visit

[@Markyx9642]

Sorry for the disturb, if I want to change from 180motor to 550 35t motor i also need to buy the 370 motor for the gearbox?

[@arehandoro_daio]

Thnx for the informative video, looking to buy a kit and upgrading it. Wondering what type of grease did you use on the gears?

[@ReadytoRunRC]

You're welcome! I used lithium grease in mine.

[@mrkemblegilstrap]

I was watching hard because my transfer case came unassembled. Any suggestions? tia!

[@TheRChobstar]

Nice video bro 🤙🔥 Greetz from a fellow wpl fan- you have a new subscriber 👊😁

[@ReadytoRunRC]

Thanks for the sub! This was my first WPL. I will have to mod some more.

[@TheRChobstar]

@@ReadytoRunRC you will have alot of fun with WPL, very upgradable

[@TheRChobstar]

@@ReadytoRunRC i just dropped a video with the WPL B36 MILITARY truck on my channel, drives like a dream 👊 maybe you can give that one a try as a next project? 🔥🤙

[@DIFFLOCKERS]

Do you need a ESC upgrade for the 370 ? sorry im new to this whole RC thing. cheers mate.

[@DyingMorgul]

Hi!) What did you use to secure the radiator to the engine? glue? double sided adhesive tape?

[@ReadytoRunRC]

Nothing. It just clips on.

[@ShadowCZ75]

Hi, I have the same motor, but it doesn't work anymore. Is it possible to separate the motor from the gears and just buy another motor?

[@ReadytoRunRC]

@@ShadowCZ75 yes it is possible and pretty easy. Just be careful with the reduction gears in the transmission. They fall out easy when taking it apart.

[@BEASTMODERC]

Nice video

[@ReadytoRunRC]

Thanks

[@deejaudible]

At what point do you connect the motor to the board? The connector on the motor doesn't match the board, so what did you do?

[@ReadytoRunRC]

I’m not using the stock board. I added my own esc and receiver. My esc has the same plug as my motor.

[@WATCHMEGOBROKE]

I just got the metal 2 speed and metal single speed..dude they are super heavy especially the 2 speed..but it takes away alot of ground clearance and i get high centered alot

[@ReadytoRunRC]

That servo does add some weight to the 2 speed. I haven't really gotten high centered with mine. I mainly get hung up on the differential for the axles. Always having to pick different lines when I'm out crawling some rocky places.

[@foxyscontent713]

Do I glue that blue engine part on the engine?

[@ReadytoRunRC]

No it clips on. You can glue it if you really wanted to. Personal preference I guess.

[@srinivasvaradaraj7784]

Great helpful video, thank you so much. I am just getting into wpls rc. Quick question does anyone know the screw specs for the standoff holes and the power switch holes? My kit didn’t include screws for these and i cant seem to find the screws to save my life. I do know that the wheel screws from the wpl km fit the stand offs but i dont know what the specs are for those either.

[@ReadytoRunRC]

I can't answer either of your questions but almost everything on here used an M2 or M2.5 screw. Hope that helps.

[@Anonymous_Valorant]

Is the motor waterproof? I have that one in my mn99s with metal drive shaft, ordered hobbywing 1060, and dumborc x6dc and a 25kg waterproof esc. With a waterproof receiver box

[@ReadytoRunRC]

motor is not waterproof

[@okhaui]

Do you know how many teeth that servo has? I’ve been looking everywhere and I can’t find out

[@richardcranium5393]

15 teeth

[@donaldhenke2750]

it also needs spot for on/off switch

[@ReadytoRunRC]

It doesn’t have an on and off switch anymore which I cut off and soldered the wires together in the next video I made.

[@dongrc6022]

great❤

[@band_siberianhusky]

It appears that the 370 motor used the hole that the cover would use. How do you secure the cover? I tried this 370 gearbox on my c24 and the driveshaft was not centered. I had to drill a hole in the frame to center the drive shaft. I was so insecure that I put the work on hold. lol

[@ReadytoRunRC]

I just used the same holes and had no issues.

[@band_siberianhusky]

@@ReadytoRunRC Thank you for your kind reply. :)

[@zachnichols3804]

Why did you pick single speed over 2 speed just wondering?

[@ReadytoRunRC]

Cause I just want to do crawling with it. I don’t need a faster speed.

[@MrKbreeze4200]

Did you have to swap out the connector? Mine came with a female but the stock one is a male.

[@ReadytoRunRC]

I did not swap out connectors. How you see it is how I got it.

[@rockman49er]

I bought some ebay metal axles and they didn't come with shims and would not work without any and they came with metal drive shafts I've shimed and got them working now my tires rub on the frame and at certain speeds the drive shafts vibrate very badly any suggestions how to fix mine now I also bought the wpl 4 channel upgrade with 2 speed transmission and oil shocks I haven't installed yet

[@ReadytoRunRC]

Yeah shims are a must. Glad to hear you got it going. As for the rubbing and vibration. I can't really answer that. Theres a few WPL facebook pages out there so maybe try and see on one of those. There's a lot of people out there with way more experience on these things than me.

[@joshherrman3201]

I've but 4 of these little crawlers and I tell ya what they definitely test your skills and patients. How do you like those shocks?

[@ReadytoRunRC]

Yes they do. My SCX24 is so much easier to work on. The shocks are ok. A little stiff. I did move the position of the upper shock mount to the next hole forward on the chassis. With angling the shock a little further, it gives me a bit more articulation in the back. I can't do the same with the front because the tires hit the shocks then when I turn.

[@justchillin1759]

Can i keep the stock servo and only upgrade the Motor with stock battery?

[@ReadytoRunRC]

I’m pretty sure you can.

[@justchillin1759]

@@ReadytoRunRC okk thxx

[@RomainGamingLTD]

Do you apply thermal paste to the heatsink on the motor ?

[@ReadytoRunRC]

I didn't apply any on this one.

[@RomainRacing]

This May Sound Strange... but I installed everything, went smoothly.. but when I have my Rear Drive Shaft On the Lower it spins opposite of the front .. when I put it on the upper, it is correct.. do you know what would cause this to happen?

[@ReadytoRunRC]

Sounds like your axle is on upside down. Flip the one axle around and it will all spin how it’s supposed to.

[@RomainRacing]

@@ReadytoRunRC Woowie, blonde moment much for me eh 🤣 thanks lol, soo thankful to have nice/helpful people like yourself

[@ReadytoRunRC]

@@RomainRacing I’ll help when I can. I only know this because I did the same thing. That’s when I noticed the axle was on upside down. Flipped it over and all was good. Good luck with the rest of your build if you’re doing anymore and thanks for checking out my video.

[@RomainRacing]

@@ReadytoRunRC Sometimes I make myself wonder lol, one more quick question.. I know it's meant for 4 or 6 wheel drive, but is there I power/speed difference that you know of between the 2?

[@RomainRacing]

@@ReadytoRunRC Deffinently and thanks again and forsure, still waiting on Spacers n wheels, and upgrade ESC, Receiver, Control etc going all out lol..

[@MPPM_RCCN]

Damn i am so scared lookin at the final result - the motor axle that goes into front axle is really long and it is not supported by any hub or any other kind of upholder. Would it get broken by that? By the tension itself?:(

[@ReadytoRunRC]

I haven’t had any problems with it yet. But I only ran about 3 batteries through it so far.

[@JulianLopez-i8w]

Does anyone know why the rear and front spin in opposite directions? Never changed motor

[@ReadytoRunRC]

@@JulianLopez-i8w you probably put the driveshaft on the wrong transmission shaft.

[@JulianLopez-i8w]

@@ReadytoRunRC explain please really new to this.

[@ReadytoRunRC]

@@JulianLopez-i8w the driveshaft needs to be connected to the long one and then the lower short one on the other side. If it’s connected like I have it in the video then it should be working just fine. If it’s not, then maybe you have your axle on upside down and need to flip it over.

[@AzPoorBoys]

Which battery are you using? I have a stock truck and want to upgrade

[@ReadytoRunRC]

Ovonic 2S 1000mah lipo. Product link is in video description.

[@AzPoorBoys]

Sorry, I swore I looked for it before I commented ha ha

[@RomainGamingLTD]

And the 9g servo is better then stock??? Currently putting mine back together with all the new parts, metal upgrades and wanted to know if the stocl servo or 9g will work.. or do I need to wait and get bigger servo (17-18g)

[@ReadytoRunRC]

9g is better than stock but I would go with 17 or 18g. They are pretty inexpensive.

[@RomainGamingLTD]

@@ReadytoRunRC Awesome Thanks! I Installed my new Motor, same as yours .. wires all good, driveshafts on.. but front wheels go forwards and back wheels go backwards... know of any reasons to cause this ?? I can't seem to figure it out ...

[@mowglippml]

​@@RomainGamingLTDis there more than one output shaft from the motor at one side? If so then try the other

[@kafinah6359]

nice video...i like it...👍👍👍

[@ReadytoRunRC]

Thank you very much

[@kafinah6359]

@@ReadytoRunRC welcome

[@jwoocrew]

I put this metal 370 in my B16 6x6. The pinion and plastic gears would slip in the stock b1 motor and gear box. With the install of the 370 metal, it seems like it has very low torque but it doesn't have any climbing power? Almost like I need to use a 3S pack instead of 2S. Any ideas? Did you do your run test yet?

[@ReadytoRunRC]

I have just tested it on 2s but only on the bench. I haven’t done any real climbing yet with it.

[@Leo_Cr]

Does that engine work with stock wpl transmitter?

[@ReadytoRunRC]

If you plug it in to stock receiver.

[@TW39]

Can a 380 brushed motor fit on the gearbox

[@ReadytoRunRC]

It can, the mounting holes line up but the motor shaft size is different. The 370 has a 2mm shaft and the 380 has a 2.3mm shaft.

[@TW39]

@@ReadytoRunRC can I cut the shaft down 2 a 2mm shave it

[@ReadytoRunRC]

@@TW39 you have to cut it down because the shaft on the 380 would be too long. The shaft on the 370 is really short to fit in the gearbox. You still would have to figure a way to put the pinion that’s on a 2mm diameter shaft on a 2.3mm diameter shaft.

[@ronkemp9528]

What kind of drive time do you get with the stock yellow battery.

[@ReadytoRunRC]

About 15 minutes.

[@ronkemp9528]

@@ReadytoRunRC Thanks

[@Anonymous_Valorant]

What shocks? The link

[@ReadytoRunRC]

Every link you need is in the video description.

[@ginomarcobundang6018]

Hello sir, can i use that kind of servo and 370 motor on stock wpl c24-1 electronic?

[@ReadytoRunRC]

Not the servo, it's a different plug than the stock receiver.

[@Murwillumbah_Motorized.]

What esc r u running

[@ReadytoRunRC]

Just a cheap amazon one. Link in description.

[@TomWest-ir5vq]

Hi whats the top speed

[@ReadytoRunRC]

@@TomWest-ir5vq I never speed tested it but I would say maybe 3 or 4mph.

[@nltme]

pls can you try the team associated SC28 it a 1/28 scale rc car

[@ReadytoRunRC]

Yes I plan on having a few of those on the channel soon.

[@EmmaGrant-q5n]

Kovacek Squares

[@richardcranium5393]

That servo isn't an upgrade js

[@orangkreatif3614]

ayolahhhh

[@Friskee62]

You could do without the annoying music...

[@LauraRoss-o8r]

Hall Gary Davis Paul Johnson Nancy

[@Haba_kiri]

1