Crossman 2250 Leaking Gas Part 1.5 Strip Down

[@andychips]

Aaargh! The reassembly process for putting the spring and ball bearing back in are out of the picture! That's the only bit I needed 😞

[@RealAirgunAdventures]

Sorry about that. I've got to do it again soon. I'll film a close up 👍

[@Disinterested1]

5.25 only a suggestion but that tiny spring looks just like a yale lock spring maybe useful to know if it ever decides to go on an adventure :)

[@RealAirgunAdventures]

Thanks, I might grab a couple for the future. 👍 Thanks for watching.

[@MilledSteel]

Good stuff, I’m surprised they put the stock on so tight in the UK. Was there a part 2 conclusion? 👀 I will say that I’ve seen some buggered Crosman screws straight from the factory. What I love here in the States is that I can call their customer service and order a bunch of cheap parts though in case anything ever needs fixing I’ve got extras of everything.

[@RealAirgunAdventures]

I like Crossman but the do make the hard to get into for the UK. I'll put the final part up soon. Thanks for watching.

[@MilledSteel]

@@RealAirgunAdventures looking forward to it

[@jonwoodhousea.k.a.pistolcr3943]

Once again, another interesting, informative well shot video! Am I correct in thinking that all I need to do to look after my brand new 2250xl is put a couple of drops of pellgun oil on the pellet probe every now and then? Did you manage to find out any more about the flashpup "situation "?

[@RealAirgunAdventures]

You are correct and a drop on the co2 caplet when you load a new one. Regarding the flashpup, I should have news next week. I drop it in here for you.

[@jonwoodhousea.k.a.pistolcr3943]

@@RealAirgunAdventures ok. That's great, thanks. 🙂👍

[@RealAirgunAdventures]

@@jonwoodhousea.k.a.pistolcr3943 your welcome

[@thedriver351]

Very helpful video am having to do the same to my 2250, is part 2.0 out yet ? Great work

[@RealAirgunAdventures]

Hi, Part 2 is coming very soon. I've had to re shoot a lot of it. Thanks for watching

[@juststuff3267]

Do you need a licence for that model to shoot wood pigeons?

[@BackyardDispatcher]

my 2400kt was leaking it was part number 2250-160 (puncture pin) that was causing the leaking in mine

[@RealAirgunAdventures]

Hi, that's interesting.did it leak as soon as the cartridge was installed?

[@LowkeyAirgunner]

The trigger part is less scary than what I remembered! I might open my Kenadian 1377 one day I was a bit bummed about the 10pump velocity 🙄

[@RealAirgunAdventures]

Just have to be aware of those tiny parts. As long as you take care its pretty easy. We'll within most people scope. The crossmans are good to work on. 👍

[@LowkeyAirgunner]

@@RealAirgunAdventures the fact that I can get most parts from crosman makes it less stressfull! If this tiny ball or spring fly out I just got to pay arround 2.30$CAD each on my next order haha

[@LowkeyAirgunner]

@@RealAirgunAdventures quick question...would you spend 5$ (poor boy money) just to make sure you don't end up swearing while looking for a tiny safety spring or steel ball? Oh and any clue of the size of the nut and bolt id need to replace the push pin in the front of a 1377/1322? {Looks like I still have howeworks to do before messing with it} [Crosman got 20% off until the 9th]

[@RealAirgunAdventures]

@@LowkeyAirgunner I would happily spend 5 Canadian. That would cost me 50 British pounds at the current value 🤣 I don't know the bolt size but I could try to measure it for you.

[@LowkeyAirgunner]

@@RealAirgunAdventures should I be able to put the pin back in if I buy a new one? Haha You mean it would cost this much only for those tiny parts? I am so poor I am thinking about saving 5$ by taking it appart under a blanket hahaha

[@dennisreid4428]

What ever happened to part 2.0?

[@RealAirgunAdventures]

It's on the way.

[@tianaaaamarie]

Hiya, is part 2 available?? I can’t find it…?

[@RealAirgunAdventures]

It's on its way. 👍

[@markhomer5704]

That would be right tricky for me too do , apart from the fact ive got scratched reading glasses from the pound shop , ive also got fingers like pigs nipples .. I'm onto a loser from the start ..

[@RealAirgunAdventures]

Lol, I could do with a pair of pound shop reading glasses. It's only the spring and ball bearing that's tricky. You could leave them but I know I'd loose them for sure.

[@mikeberty8599]

Mate i have a bag of about 200 of they little ball bearings haha

[@RealAirgunAdventures]

You are a wealthy man 😅🤣

[@Airgunfunrich]

For the Philip’s screws I have a no 2 pozi bit.. this rifle has been butchered. Philos bits for Philip’s screws pozi bits for pozi screws jis bits for jis screws..

[@RealAirgunAdventures]

It's just mixed metaphors, it a modern 2250 so it does have pozi screws. I often talk in feet and inches too, when metric would be more appropriate 😅

[@Airgunfunrich]

@@RealAirgunAdventures always makes me laugh, go to a timber merchant’s and the kids serving that have never learned imperial still say 2x4 not 50x100. Then say you want 5m of 2x4 rather than 5.4 yd….

[@RealAirgunAdventures]

@@Airgunfunrich yep I'm terrible for that. 1/2 pipe and 15mm fittings 🤣

[@LowkeyAirgunner]

@@Airgunfunrich in canada we say 16 foot of 2x4 hahaha