PAY IT FORWARD . . . Please help me keep all my resources FREE for everyone to learn from and use. DONATE any amount here www.paypal.com/donate/?hosted_button_id=M3YAHB3J4PX5A
Пікірлер: 760
@btlfansanchez936210 жыл бұрын
My husband had this problem today and thanks to your video, he fixed the problem by following every step. He was quoted $ 600-800 by the dealership and he spent $12 for that pink plastic part. My hats off to you Sir! God bless you!
@sifiguy60588 жыл бұрын
Thanks you sir! you just saved me well over 250 bucks. for those of you that have a Chrysler 300, you have to remove 3 screws inside the bottom of the armrest compartment, slide it back, ( it doesn't have to come completely off) and lift up on it while you maneuver the shift control out. the replacement part will run you bought 10 to 12 bucks at the dealership.
@A10TOES8 жыл бұрын
Thanks for this info, had trouble pulling the shifter out (very tight) and I was worried about replacing it, this should help a lot.
@xTHHxAimiForevr9 ай бұрын
Bless you for not making another "your bushing needs replacing" video and actually getting into how it works
@llee37672 жыл бұрын
Your video was the easiest and fastest, thank you! My cousin told me to have it towed to a shop that would charge me $200 just to look at it. A friend said he would do it but he was trying to find the time because he watched a video that required the entire console to be removed. With your video and the grace of GOD I did it myself. I struggled a bit because I didn't have the right tools but I have the right tools now. As a woman I really appreciate easy to follow car repair videos like yours. Thanks again for your awesomeness! 😍
@billykidd195510 жыл бұрын
Ya hear people say enough "words cannot express" how happy, how grateful, how pleased I am..Well if ya stop and think about that phrase, words are simply not powerful enough to emit your emotion to others...that's what it means..so words can't explain how much this vid saved my ass today...thank you so much.
@FunLuvinBrit10 жыл бұрын
This was exactly what I needed. This was the exact problem I had and I really appreciated the step-by-step guidance and well-shot video. I had a little difficulty getting the rear end of the shifter out but a little joggling and flexing of the center console side panels did the trick. In my case I bought the replacement part from my local dealership for about $13.50 after tax. Great Job and thanks for posting.
@wrenella8 жыл бұрын
Thank you so much! It was a bit trickier getting the shifter out of a Chrysler 300, but all your steps were so clear and easy to follow. Part kit was $8.10 from Chrysler, who would have wanted $250 to do the work. Thanks again!!!
@mannypayala Жыл бұрын
For over 10 years and your video it is still helping people. Very well done and easy to follow. I was in a restaurant at 11:00 pm when my car experienced this problem. Thanks to your video I was able to unlock the shifter in a few minutes and drive my car home. I repaired myself the next day again using your video. Thank you very much.
@realfixesrealfast Жыл бұрын
Glad it helped, thanks for commenting
@mommomconnection8 жыл бұрын
This is the BEST video on this topic. The dealer insisted I needed a whole new shifter and wanted to charge over 400$ but I watched this video and was able to fix it by getting that little part for about 12 bucks on Amazon. The only difference is I have a Chrysler 300 and in the bottom of the arm rest there are three bolts that need to be unscrewed because it wont allow for the shifter to come out without lifting the arm rest a little. Thanks for this video.
@jarinwilson953911 жыл бұрын
I love those swivel head snap on ratchets. They were one of the first tools I bought. Most auto repair is all about the attitude....you go at a vehicle with a positive attitude, you will be just fine. I'm slowly see more and more of these newer Chrysler vehicles come into my uncles shop, so i'll keep this repair in the back of my mind. Great video
@karlkiekhaefer22385 жыл бұрын
I hope my comment arrives and you are in good health. God bless you! Thanks to your tutorial I was able to tow my boat again and take my wife on vacation. I was desperate. The lever was no longer moving and I was about to call the tow truck. Then, through an Italian forum, I came to your video. You are an angel, you saved my holidays. I hope all is well for you and your family !!! Grazie grazie grazie !!!
@realfixesrealfast5 жыл бұрын
Glad to hear it helped you. Thanks for letting me know. And by the way, I am doing much better.
@janmaci79238 жыл бұрын
Thanks so much, I was able to follow this to repair my 2006 300 Touring Sedan!. One problem was getting the shift assembly out due to my model having a spring loaded cover for the double drink holder. I was able to maneuver it out only after removing the 3 screws inside the center console that hold it down, then raising the back end of the console to create a bit more space. I greatly appreciate this video tutorial. It is the best of many that I reviewed before starting.
@precopster111 жыл бұрын
This job is a testament to your patience, Duane. The customer is very fortunate to have steady hands like yours on the car!! Well done!!
@lazypotato22047 жыл бұрын
This is the simplest, fastest, and best explained video by far regarding this issue. We got it right away, followed each step slowly and fully paying attention. Little replacement was $15 at the dealership, and a little pick and hook set that we didn't have for $7. Thank you sooooooo much for taking the time to make this video the way you did!
@clwjr3275 жыл бұрын
Thank you so freakin much! I was stuck 60 miles from home and I live in a foreign country. Your video allowed me to get home and get my car to a mechanic the next day!
@realfixesrealfast5 жыл бұрын
Glad it helped, thanks for letting me know
@09palacio8 жыл бұрын
Thanks for this video I a half ass backyard mechanic was able to do this job. Your way was the easiest of all I reasearched and no doubt you saved me alot of money. The Dodge dealership in St Louis Park sold me that part for $10 and thats all this repair cost me. Thank you
@KedyB9 жыл бұрын
Thanks for making this video. Got in my car and the shifter wouldn't budge, I immediately went on KZbin, I KNEW someone would have a video, to get me on my way Thanks again
@a747baumer8 жыл бұрын
I appreciate your straight-forward direction on this fix. Other videos made it seem a bit more difficult, but following your method I was done in roughly a half hour. Thanks for this video.
@tonyr90338 жыл бұрын
I was able to follow the video and fix this issue myself. You did a great job of explaining step by step in detail. This was by far one of the better mechanical fix videos I have seen on You Tube. It always helps when someone else is holding the phone/video camera.Thanks again for your help.
@jlt4him2day8 жыл бұрын
This video was right on for the same issue I was having with my Chrysler 300, the gear shift was stuck in park. You even show the part number I needed to call Chrysler. I watched the video and had my husband pick up the part after work. He was able to take everything out watching your step by step video. I'm in business now all thanks to you, and it only cost $10.
@Dee-yj3gf9 жыл бұрын
I really appreciate it. I did the repair in no time thanks to you. No money for the dealer today !!!!!
@jasonbrodie8051 Жыл бұрын
Couldn't have asked for a better step by step video. I'm so happy I found this. You saved me a ton of frustration! Thank you!
@shanell15309 жыл бұрын
I swear your FREAKIN awesome my boyfriend was able to fix my 05 magnum thanks to watching your video! I had watched a number of videos before I ran across yours and by far this was the easiest. Thank you :]
@elicoleman56042 жыл бұрын
A man willing to watch the video with his woman and do the work to save money to spend somewhere else is a keeper and a blessing! I hope y'all are happily married together and continuing to work together! God Bless!
@ericfrank18008 жыл бұрын
Excellent instructional video. So glad you took the time to post it. Thank you for getting me back on the road!
@BrettTousley7 жыл бұрын
Thank you! Your well made video turned a potential cluster of a repair into an easy one!
@ThatCleanMT9 жыл бұрын
Thank you for this extremely helpful video. My 07 Charger R/T experienced this problem about 2 weeks ago. Dodge quoted me 400+ to have it fixed. I find your video, paid Doge 12.00 for the interlock replacement kit and the whole process of removing the old and installing the new took me about 1 hour. MUCH APPRECIATED. You saved me money!
@danielfahlgren46347 жыл бұрын
Thanks so much! I was worried about a huge repair bill. I got the latch in 2 days from Amazon, and the fix went just as you described.I really appreciate you posting this!
@pimpass83montecarlo4 жыл бұрын
Daniel Fahlgren what was the name of the part to order
@bylbutler6 жыл бұрын
Thanks for the Strait Talk without any FLUFF or Unnecessary words. Refreshing.
@panchocorona95068 жыл бұрын
I was able to get my mother in law back on the road with this video! Thank you!
@callmike210 жыл бұрын
My hat is off to you also!. I was stuck in the driveway blocking my other vehicle in the garage. My son and granddaughter are coming in on a plane and this car has to move. Thank you for your steady approach to the problem. I couldn't go to get a part so I made a patch using 4 rounds of small braided stainless steel wire. The wire is nylon coated, so I expect it to last much longer than the pink plastic. Did you see that one guy had found one made of billet aluminum... that's the permanent answer. Thanks again for saving the day!
@kevincragwell32202 жыл бұрын
...information never goes stale...9 years later...and still...helped me out tremendously...thanks.
@williammarr19315 жыл бұрын
Thank you for your detailed explanation for fixing this shifter. At first I had my doubts about being able to do it but your video was so clear and thorough that it gave me the confidence to try. I’m glad I did. Problem solved!
@Jonjon_33336 жыл бұрын
Awesome and very thorough, so easy to follow each step!! I was able to fix my 2005 Chrysler 300 in an hour! THANK YOU!!!!
@golflife258810 жыл бұрын
What a chore this was today in my Charger R/T. My console that the shifter housing actually sets in isn't quite as open as the model in your vid so it was a JOB getting it in and out without taking apart the whole console. But, None-the-less, your video saved me BIG TIME! For that my man, cheers to you, sir.
@brittanyprice76318 жыл бұрын
Thank you! This happened for the first time tonight as we're trying to get home after a long Christmas with family, and we just wanted to get home. This helped tremendously!
@TaveyKinkead9 жыл бұрын
Thank you, RealFixes. With the help of your video, we were able to determine what was causing the shifter to lock up (Chr 300) as well as replace it ourselves.
@oldirtybirdy25338 жыл бұрын
I just wanted to thank you for posting this video. I did the replacement myself. The whole process took me about a hour and part to replace costs like 14 bucks.
@davidlarcombe53336 жыл бұрын
This video was a great help. I just changed the latch on my 300c here in the UK, replacing the pink plastic one for a metal one. I did it before it went bad; it would only happen at a really inconvenient time otherwise. As mentioned in other comments, I had to remove the three bolts under the arm rest and lift it to enable removal of the unit. Also I was advised to put a bit of lithium grease on the shaft before putting the metal one on. Many thanks.
@toddgleeson79975 жыл бұрын
Had to do this today. Your video was by far the best at showing the steps and explaining things. I also removed the ash tray assembly as it simple pulls away from the dash and gave me a bit more room to work. I also ordered Dorman part # 924 706 as it is made of aluminium . Thanks again!
@eddie82797 жыл бұрын
thank you,thank you,thank you!!!when I saw your video I was amazes at how simple this is. I had an appointment with the dealership to do this,it is going to be canceled! as im getting older I have to pick and choose what repairs to tackle. this video was such a tremendous help,cant thank you enough! part comming from amazon tomorrow,Charger should be back on the road good as new.
@MrDdub6198 жыл бұрын
Thank you so much. After watching this video i went to dealer to see how much they would charge. The part was about $25 bucks but they wanted to charge me $240 bucks just to change it. I only bought the part, watched your video again, and performed the maintenance myself. Thank you for this video
@kathyvos6686 жыл бұрын
This video was so clear and helpful. It fixed our issue!! Thank you for posting!!
@zairemonae97305 жыл бұрын
Thanks for the video, I fixed my car using this video and I've never fixed anything on a car. Saved me hundreds of bucks.
@mopared8 жыл бұрын
wow extremely well illustrated, no missing steps.... thank you so much for sharing your knowledge.
@aescomadsen737410 жыл бұрын
My vehicle is a 2005 Chrysler 300C. With your video, I was able to successfully make the repair to the shifter in about an hour. Thanks!
@dondbazsika10 жыл бұрын
Thanks for a GREAT video. I broke down at my son's school. I had only a leatherman and a windows phone on me. I got it open and got it into drive and drove it home. Called the dealer to get the part. At first they had NO idea what part I needed. "The pink part on the bottom of the gear shifter..." I saw your part # and they had it for $8.43. Once again, can't thank you enough!
@derrickhenry805 жыл бұрын
I just want to say thank you!! I was able to fix my Charger following your video. You kept it simple and it didn’t take me long at all. Not to mention I saved some cash!! Thanks once again!!!
@TannerTubeTV11 жыл бұрын
Best video I've seen on the topic and I searched through quite a few until I found this one. Had no tools available but using this video I just made a makeshift screwdriver to get at the lever so I could disengage the lock manually. Super clear instructions and it got me back on the road home so I could actually make the repair. Much appreciated!! I'm a subscriber now and I'll let the ads run!
@scottpodoll76208 жыл бұрын
I don't normally do my own work (time, experience,etc...), but this video was my Bible. thank you so much!
@jorgeloera97859 жыл бұрын
You are my favorite mechanic teacher, because you actually explain what to do, and you are speaking clearly. Thank you very much.
@jtg19617 жыл бұрын
I have a 2008 Chrysler Pacifica but it's all basically the same. What I like about your video is you replace the part without taking the gear shifter knob off. I tried to unscrew mine to the left but it wouldn't budge and I was afraid I'd break it. With your method, you don't have to take it off. I bought the metal replacement piece instead of the plastic one and reused the old spring. Thanks for taking the time to post this video to KZbin.
@galexander98576 жыл бұрын
Awesome do-it-yourself video!!! My wife's car broke at 5:30am as she tried to go to work. I got it moving using a screwdriver to push back on the front pink part that has the spring. The spring appears to be missing. Until I have time to fix it next week, she can use the screwdriver to unlock the shifter. Thank you for taking the time to film and post this video. GREAT JOB!!!
@daweb81211 жыл бұрын
Very helpful & informative. Changed out the Shifter Interlock Lever today on my 2007 Charger. One modification added .10 wire to spring and wrapped in around lever to reinforce spring and lessen the tension on the plastic spring hook. Also removal of console was necessary to pull shifter; 3 bolts & 2 screws. One quick remedy to shift out park is to pull chrome trim piece, locate cable for the brake lockout, depress brake pedal, push cable to the left with a screwdriver pull shifter into gear.
@cameronhegler8139 жыл бұрын
Thank you saved me from not being able to go to work!
@jaiarobey86625 жыл бұрын
This video just helped me out of being stranded, thank god for this and you now I just need to get it really fixed
@clinedj17 жыл бұрын
Thanks for the great video. Just fixed my 2006 magnum. The Dodge dealership was going to make me by a whole new shifter $350-400. I found the metal replacement at the auto parts store and fixed it myself.
@laurieseals31317 жыл бұрын
thank you. this is a excellent video. I only spent $12 dollars for the part at dealership. you save me a lot of money. I would recommend this video to everyone who had the same problem. it now works fine. thank you again.
@vdgitaliano2 жыл бұрын
I learned the hard way to take the ashtray seat warmer out. It simply pops out and there are three plugs on the back. It gives you a whole lot more room so you don't struggle too much. I am thankful to guys like this who make these videos which help save people tons of money and also give them hope that it isn't as bad as they might think.
@Caine459 Жыл бұрын
What’s the name of that piece
@Tonia-ye8fc3 жыл бұрын
Don’t know how to thank you you’re a life saver, I have a Dodge Charger and my develop the same problem watched your video and was able to repair it myself.
@realfixesrealfast3 жыл бұрын
Glad it helped
@dougroberts13336 жыл бұрын
You do a GREAT JOB. Lighting and dialog. Thanks....and my grandson will thank you.
@scampalong5 жыл бұрын
AMAZING that people take this amount of time with detailed instructions to help others. Thank YOU ~
@wandat464 жыл бұрын
Yes he's good.
@mrnrc17835 жыл бұрын
The best self fixit I have seen. Had no idea my shifter was such a piece of plastic junk until now. Chrysler should fix this for free but I know I’m dreaming.
@williamwhite97674 жыл бұрын
Actually, I've read there is a secret warranty on these.
@mro83316 жыл бұрын
I experience the same problem with my Dodge Magnum RT, several mechanics were saying that it could be my brakes, timing and other issues. none of them had no idea. When i came across this video it was a cash $$$ saving and easy to follow video to get the job done. Thank you.
@strokewarrior57626 жыл бұрын
Your welcome, glad it helped, and thanks for letting me know
@scottnorman8798 жыл бұрын
I was about to call a tow truck for my Chrysler Pacifica. Mine looks a little different but your video helped me tremendously! Thanks much!!!
@Michaelfromfremont6 жыл бұрын
Thank you so much, for your help and hard work‼️ This was the BEST DIY video on the shifter interlock latch assembly PERIOD. You made EVERYTHING look so easy and the video and documentation was spot on for the entire process... If I may humbly suggest one small thing that I felt was possibly insignificant, but may help someone else in the replacement process, and that would be to remove the ashtray. It kept popping out lol. I honestly thought you were going to suggest it, but then realized you were trying to do all of this with the least amount of steps possible. For that Sir, you must be congratulated, Thank you sincerely for this video and saving my family and I, a possibility of an expensive repair, or possibly being taken advantage of for a much more expensive repair that was not needed... I’ve been ROASTED many times in the past for simple repairs as this, and living on a fixed income makes it hard for automobile repairs period. Some people can be less than honest about such things, but because of your help and diagnosis, I can now sleep tonite! Kindest and best regards, Michael
@realfixesrealfast6 жыл бұрын
Thank You I appreciate your comments. You have brightened my day
@billsmithers9693 жыл бұрын
A big THANK YOU coming from NorCal - while my unit did not come out (or back in) as easy in my '07 R/T as yours did in the video, I got the job done and it saved me gawd knows how many 100's of $.
@lfsandoval19808 жыл бұрын
hey you guys rock after me and my wife saw your video on how to fix ,we did our 300 that got stuck on park we thank you so much you help us to save money THANK YOU...
@bloodragon717 жыл бұрын
Thank you. This is exactly what happened to my wife's magnum. I was able to fix it with your video.
@sweetz6649 жыл бұрын
Thank you so much for this video! I saved myself hundreds of dollars by doing this myself. I found that I had to remove the bolts in the arm rest in order to get the shifter out of its space. I also ordered a metal unit to replace the broken pink unit.
@Callalily178 жыл бұрын
Thank you so much for this video! I was able to fix my car in just a couple of hours and and I'm sure saved myself a ton of money!!!
@pyrosai11 жыл бұрын
your video saved my wife today, she called frantic while she was out of town and her charger wouldnt shift out of park, your video let me talk her through it and get the car back home where i could work on it, thanks again !!
@gamerdad83 жыл бұрын
Oh my GOSH! You are awesome! My son and I followed your video and fixed this in our Chrysler 300. The part cost $15 and saved me over $200 in mechanic cost. Thank you so much.
@realfixesrealfast3 жыл бұрын
You're welcome, thanks for commenting
@rmo711 жыл бұрын
You're a master mechanic. Excellent video
@lanib7889 жыл бұрын
Thank you so much for a great step-by-step. I was able to replace the "pink thingy" on my 2006 Chrysler Pacifica with a metal one I bought on Amazon for less than $20. I am NO WAY a car person, but I am fairly handy with a screw driver, and your video was the easiest to understand and follow. I did need to find another video to help me remove the Pacifica console to get to the root of the problem, but I credit your video with saving me LOTS of time and money.
@moneysaver6284 Жыл бұрын
Great video, I wish everyone was as thorough as you
@robdlp24209 жыл бұрын
Man great video love the details, just followed u step by step n got my 06 charger fixed in no time. Thanks
@hectorhuarcas80636 жыл бұрын
thanks to this video i can fix my car to leave a lonely place and at night I really appreciate it God bless you
@jeffwhite56492 жыл бұрын
Your instructions were on point. Im so happy i came across your video instead of paying a shop to do it. Only real problem i had was getting the shifter out of the space. I have an 06 charger and struggled for a while until i decided to take the console loose. It did the trick. Thanks !!
@strokewarrior57622 жыл бұрын
your welcome, glad it helped, thanks for commenting
@davekwood4 жыл бұрын
I know this video is many years old, but still very valid and current. I wanted to thank you for taking the time to film and explain this process, it saved me nearly $900 (Cad.). I worked like a charm for my '07 Charger SRT8. Again, thank you for this.
@strokewarrior57624 жыл бұрын
Glad it helped, thanks for your comments.
@acater-smith44335 жыл бұрын
What a great guy! And a great video! Thanks for the heads up!
@mikeippolito55114 жыл бұрын
Thanks for this thorough and helpful video, saved me hundreds of dollars and the part is only $17 on Amazon. Removing the shifter knob gives more room to replace the part. Pry the plastic oval trim at the base of the shift knob downward using a flat screwdriver, then unscrew the knob counter clockwise about 15 turns to remove the knob then you can completely remove the PRNDL plate and whole top cover. Took me about 90 minutes to do the job with my 13-year old son.
@mercykidssprgeducationchan42374 жыл бұрын
Glad it helped, thanks for your comments.
@bobpiacentino429510 жыл бұрын
Awesome!!! Just fixed my 2006 300C. Part cost $8.91 at Dodge dealer. Followed video and everything went fine. Great Job!!!!
@gpchoochoo2182 жыл бұрын
The only way this video could have been more helpful was if he came and fixed my car. Thanks so much for doing this !!! Great job.
@greglawrence7423 жыл бұрын
Huge thx! Great video. Direct, accurate, nothing skipped.
@Akamakapeepi4 жыл бұрын
Thanks a million! Well, actually, thanks 400 bucks, but you get the idea. You produced a very lucid and helpful video. Much appreciated.
@bobg16086 жыл бұрын
Great directions, I wasn't able to buy the part but had to buy the whole shifter. Was going to cost 650 for the dealership to do it plus around 100 for towing it. Paid 200 for shifter and replaced it myself! Happened in the morning and fixed it the same day! Thanks!
@BTOURES Жыл бұрын
Excellent video. Very informative. Great step by step. No excess talking about things that are not prudent to what you’re trying to show!
@Realghosthunter13 жыл бұрын
This video saved me tons of cash! Thank you! The only difficulty I had was pulling the shifting mechanism out of the car and putting it back in place once I had the part replaced... But it finally went thank you again
@greendreams78909 жыл бұрын
Thanks for the vid!! Used your instructions fto dissemble console and shifter, but I used a small self tapping screw with the old assembly and re-attached the spring. Worked like a charm and saved a little $. THanks!!
@robertbloor27379 жыл бұрын
Thanks for the video. I watched it, then went to the Dodge dealer for the parts. I cost me $8.63. It saved me I would guess about $300. Good job. It took me about an hour to do it once I got the parts.
@sadatbailey45267 жыл бұрын
Your video was so informative. I saved $350 doing it myself. Thank you very much
@Gr8one6545 жыл бұрын
I suck at anything mechanical & after watching you do the fix i decided to try it! My 300 was stuck in park in my driveway. I went to the dealership & picked up the part ($14.00) & went home with my cellphone in hand & fixed my 300. Thank you for making & sharing this video.
@realfixesrealfast5 жыл бұрын
Tony, I'm glad it helped and thanks for letting me know.
@youngfat329 жыл бұрын
I personally want to thank you for this video. Because of you I save some money and I was able to fix my car my self. GREAT GREAT VIDEO EVERYTHING WAS PERFECT THAT YOU SAID AND DID IN THE VIDEO. ONCE AGAIN I THANK YOU FOR THE VIDEO AND GREAT VIDEO
@rugar4k9 жыл бұрын
My husbands car had this problem when he attempted to leave for work Friday. I posted on a local facebook page asking for recommendation for towing and mechanic. Someone asked what the problem was and year/make of car. (2006 magnum). He shared this video with me. So thankful to see this. Now to get the part and get it fixed - and not have to pay for towing and labor :)
@feralcattamer47532 жыл бұрын
The best instructional video I've ever seen and saved me $$$ I would have had to pay the dealer to do it. Recommend taking that darn ashtray out if you ever do a new video, but this works too. ;)
@lashane68528 жыл бұрын
Thank you!! Just got done with fixing my charger, the video had great instruction step by step details, same me soooo much money!!!!!
@mysticanimation225 жыл бұрын
Super helpful! Just fixed this part on my 05 Magnum. One suggestion I found that gives better access to the shiftier is removing the center console. At the bottom of the storage bin is 3 screws. Remove those and snap off the 2 sides at the front and it will slide out giving much better access to the screws and avoid scuffing anything else.
@judithortiz3762 жыл бұрын
LLP pp p
@judithortiz3762 жыл бұрын
Q)
@richardjennings17869 жыл бұрын
Outstanding video and great patience! I appreciate the post. Going to try this next week!
@troynoble1686 жыл бұрын
Thank you so much for this video! You just saved me hundreds of dollars instead of going to the dealership. It's a shame Chrysler doesn't make that part out of metal.
@stuartnorwood76519 жыл бұрын
Many many thanks, I had just this problem on my Chrysler 300C. Bought the right part and had it fixed in about one hour and the part cost just £6.96. Super!