Cooler Master TD500 Mesh - Airflow King? || Review Build

[@jzuany]

I have this case. Its king in the mid size cases. I added an air filter in the 120mm exaust and removed the acrylic front panel and placed an diy air filter which i cutted myself using the acrylic front panel as a mold. The cable management in this case is superb easy if you use all the zip tie placements in the case. Plus I removed the HDD bays for a better cable management.

[@ilyaasguelmim2994]

Hi man does this case come with a fan-hub or no ?

[@NonMatura]

I have just bought one and I'm wondering, what's your cleaning routine? The ones I've had before I could clean em with cottom and Isopropilic Alcohol but in this one the cottom gets stucked between the spaces, halp lol

[@ra1denx]

I was thinking of getting this case. Thank you for confirming for me I'm getting it.

[@Avliv_Satan]

I got this case not too long ago and I have to say that it's pretty easy to build in, which is why I actually like it.

[@ShizzleGaming14]

Was double checking if you could install an air cooler up top. Looks like you can 💯

[@madhaze0126]

yes I would prefer it on the top also

[@PrettyboyPa]

Should have gotten the 12700 since it doesnt have an overclockable board and shoulda came down on the ram to 32gb and gotten your friend a 3080ti honestly. Not trying to hate or anything just giving my opinion on the build.

[@serhanyalciner7015]

you need to turn around youre radiator because of the air ( but cool build got the same in white )

[@creeperaby_vlogs]

I have pc cable management phobia. Didn't inform there is a cablemanagement section. Its a joke😂 Nice vid❤.

[@wingsofspeed4023]

There is no point installing a k chip if you dont have an overclockable motherboard. Would have saved money by going with the 12700

[@urlikurlik2552]

Great video, im going to get this case! Do you know what depends on which 3 fans you get up front, because i see on other reviews they are not always the same. Sometimes there are 3 sickleflow fans and sometimes there are 3 cf 120 argb fans.

[@DelayEdits]

I have been trying to find the fan make for so long

[@rafaexpress]

The rgb leds from my front coolers are not working, but the coolers are spining.. there is a specific cable for the leds?

[@8ROAS]

How did you installed the fan that has no screws?

[@LukasQueen]

I just bought this case but my front fans arent spinning. Rgb also doesn't sync with my hyper 212 heatsink. Anyone know how to fix this?

[@kyontje7118]

Will the cooler work in the td500 mesh v2? The newer case?

[@NonMatura]

Bought this case two months ago and I'm wondering, what's your cleaning routine? The ones I've had before I could clean em with cottom and Isopropilic Alcohol but in this one the cottom gets stucked between the spaces, halp lol

[@sahilm483]

Hello I am super new to PC build and I am getting this exact Case model next Tuesday. Could you please recommend me what Fan should I use as the exhaust? Thanks in adv

[@sjuuldeleeuw3517]

Scythe noctua corsair or lian li. It doesnt really matter look to db and rpm

[@ArcturusCOG]

Doesn’t matter but I’d recommend getting fans that are quiet and match the rpm limits or are close to the rpm limits on the front fans.

[@RubbingPotatoes]

Is there not enough clearance for the top mount aio with tall ram ?

[@alexzn4028]

Is there no problem with the liquid cooling tubes coming out the top?

[@chaouibouchaib7905]

je cherche un HP Spectre X360 13" ?

[@samuelcarneiro2210]

Fits a 4090???

[@stupidshyeep]

Question for you sir, About The front fan of the case for mine. I apologize in advance for my very basic computer speak. The very bottom of the fan isn’t spinning. Any recommending to restart it? The top two are spinning

[@nehemiahledwidge9131]

I’m thinking about getting this case. Do I need to buy an extra fan for the back of the case? Or is that not a necessity

[@ArcturusCOG]

It’s not really necessary unless you have high TDP components. (High wattage) although they’d work fine with out exhaust it’s better to have it to balance the cooling, 3 fans at the top and 3 in the front. Negative and Positive pressure really don’t matter unless you care about how quickly dust builds up in your PC.

[@preyz.]

should i add extra fans to this case or are the 3 font pre installed enough?

[@Makalon102]

Fans are very cheap so I would just max it out

[@andrewp.3359]

how to set up that color/argb lighting on the fans sir?

[@kestrelloz]

Im not an expert, its the back fan a mjst have? I see you didnt put one there

[@Kingwolf23tv]

What are the fans in the front called they are really nice and am thinking putting it on my build

[@m1leh1gh00]

can you change the rgb?

[@iMonkeyLegend]

How are the temps for the GPU?

[@Skittles_no]

Do u know if there is a reason that my bottom 2 fans are glowing with rgb and not the top one?

[@pbertain]

You prob didn't connect the cable. It comes detached on the third one.

[@yongchun2183]

I wonder if this case can fit a RTX 4090 gpu or RTX 4080 gpu?

[@ninjastar.]

definitely not

[@kenshinhimura9387]

@@ninjastar. yes it can fit easily. RTX 3080 fits no problem. 4090 is same size just thicker which doesn't matter with this case.

[@emilmanoj8841]

@@ninjastar. literally have this case for my 4090 and it’s fine

[@ninjastar.]

@@kenshinhimura9387 i just realized i read this comment completely wrong my fault

[@ninjastar.]

@@emilmanoj8841 i read the comment wrong my bad

[@ExecutivePuma]

is it possible to pop off the front panel?

[@planktonfighter]

4:38

[@ExecutivePuma]

@@planktonfighterTHANK YOUUUU

[@adampsyreal]

Build Redux uses these.

[@AniSepherd972]

add arctic p12 pwm fans and you would be good.

[@kylejhoward]

Would this case fit a RTX 4090? Any idea?

[@licmarianoflores]

I don't think so

[@ArcturusCOG]

Depends on which one, Although it should fit most. I’ve had this case for a long time and my 3090 fits so hopefully the 4090 fits as well even though I’m not gonna get it.

[@RobHardwell9]

@@ArcturusCOG Sir, was your computer full of dust after a few months due to the front mesh as per the video?

[@eirikjohansen6132]

The hoses on the AIO should never be mounted so they are on top of the case, it causes air in the pump

[@casualfungaming4356]

as long as the pump is below the highest point of where the cables connect it's perfectly fine. If we are talking about that one video, most people misunderstood it completely and started critiquing people's AIO placements for nothing really. his AIO is fine.

[@chinesejohncena9137]

How do you top mount a 360 mm aio in this?? I have the exact same case and I find it impossible to install it. Currently there's a 240 mm installed and it's less than inches away from the ram

[@Megan24Nichole]

Remove factory fans n install it there