Realistic RC Hydraulic Excavator - Kabolite 336GC

[@paulkandi]

Excellent sound … What make please..?

[@mareali]

Thank you how can I adjust the valve angle and valve rotation on the remote control?

[@jamesmeaney4069]

Very smooth operating

[@soaringkhaled]

Hi , so if I took your advice and adjusted the following ... I won't need to replace the original hydraulics ?? I was also told that the V3 has upgraded ESC, Pump, and Valve block ... but it looks exactly like V2 ... I wonder if you can confirm if yours is V3 Thank you very much .... 1 Set the valve angle correctly. 2 Set the valve rotation on the remote. 3 Set the pump speed

[@alexaparicio12]

Un video genial!!! Que excavadora recomienda?? La Volvo ec160e o la kabolite 336? Gracias

[@sc4rles]

Kabolite for sure!

[@paulkandi]

I have a Double E with sound, but no we’re near as good as this you have, is it possible to remove and install this system? It has 10 channels..

[@อู่ช่างปิงโมดิฟาย]

👍👍👍

[@caymanite_rc_construction]

What sound kit is that?

[@tncexcavator2538]

kzbin.info/www/bejne/fGWXYaiXYpKZo6c

[@rcplaytime]

Man thats awesome 👌 thinking of getting one,any issues sofar,your very good at controlling it👍👍😀 subscribed 😀👍👍

[@miklbld9073]

Better volvo ec 160 ?

[@mareali]

Hello as I can see, it worked well with the sound. Your video has become great again as always. Do you also have problems with the hydraulic block and the stability of the pressure in the cylinders? I just can't get it under control, I've often replaced the O-rings, but it doesn't really help. If you have a solution, I would be grateful. I had already tested the continuous operation of the pump, but it does not lead to a better result. Regards Jürgen

[@tncexcavator2538]

If the oil does not leak There is no need to replace the O-ring. If the hydraulic cylinder is powerless or the drive is unstable This may be due to the angle of each valve not being in the correct angle. and the valve rotation control setting on the remote is incorrect and the pump is not working at 100%, which is complicated, but can be summarized in 3 steps: 1 Set the valve angle correctly. 2 Set the valve rotation on the remote. 3 Set the pump speed

[@mareali]

@@tncexcavator2538 Thank you how can I adjust the valve angle and valve rotation on the remote control? Jürgen