REAR FLOOR BUILD PART 1! SO MUCH BEAD ROLLING!

[@WWS2]

Clecos are one of my favorite tools. Great job! That looks better than factory. (they cheated putting wood in)

[@Wingnut_Stickman]

Those look like straight lines from where I am sitting. Rolling, rolling rolling, keep those doggies rolling!

[@PuddinsFabShop]

Lots of rollin!

[@almaylin464]

It’s freaking awesome to see how far you have come in a rather short time. I’m not sure how you see these older videos but I enjoy watching the Puddin we’ve come to know and enjoy emerge from the early days of the Guy almost scared of the camera and the judgmental attitude of people. Love the channel both of them

[@Cb7_Jim]

This build is so awesome! Great work Puddin'

[@jasonstarnes3838]

Holy bead roller!!! What a fine ass piece of floor. Way better then plywood!!!

[@PuddinsFabShop]

Thanks!!

[@beardedscrapper538]

Thanks to Brandon for getting puddin and his floor pan straight. Looking good man.

[@HFG]

I'd watch moss grow on a brick as long as there are Clecos involved :) The floor came out amazing.

[@PuddinsFabShop]

I was pretty happy with it!

[@ManChildMaineiac]

I love this build and how you show all your viewers that they can do all this stuff with simple tools that most people have in their garage! Keep it up man!

[@SchysCraftCo.]

Puddin. Keep rockin and rolling. Looking real good. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.

[@Alfie289KCode]

That is a fine looking floor pan there Puddin

[@kwikslvr73]

Looks factory no better than factory keep the videos coming!!

[@PuddinsFabShop]

Thanks!

[@brianandcrystalgibson2595]

Floor looks great i have always thought it was factory style

[@MrQdawgs]

I agree with the floor needing to raised and flush. Looks factory

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@runsolo7418]

Love how the bed turned out.

[@duff8402]

12:52 BILL!!!!!!!!!!!! 😂😂😂😂😂😂😂😂😂

[@davidcooper5333]

Looks awesome keep it up. I'm going back thru to watch the build up.

[@endall6783]

I think that turned out looking real good that's how it would have been done at the factory Sir good job.

[@PuddinsFabShop]

Thank you! That’s the look I wanted!

[@paintgunexpress1949]

WHOOOOO...Doing Back Flips When This Hits every time....Doing Darn Good....Keep it up..Built Not Bought........ Keep Grinding

[@PuddinsFabShop]

Thanks for watching!

[@paulspangler2088]

Another awesome video, keep them coming!!.. Cant wait to see the finish project.

[@PuddinsFabShop]

Thanks!

[@tirejockey806]

Looking factree! Really like the bead rolls, gives it just that extra look of love! Be proud man!

[@PuddinsFabShop]

Thank ya!

[@rockypergin2216]

Looks good 😊! Quite a process!

[@PuddinsFabShop]

It was a lot of work!

[@ForsakenSteel]

Man that turned out nice.

[@PuddinsFabShop]

Thank you!

[@johnfry9010]

Looks like it came off the assembly line with that floor , very nice !

[@PuddinsFabShop]

Thank you ! That was the goal!

[@BANACANADIAN]

Turned 0ut really nice and factory looking great job

[@jasongrigsby2017]

Thats a big piece to attempt so many straight bead rolls on. It looks like you did good on it.

[@PuddinsFabShop]

They turned out pretty good! Good enough to be hid my sound deadner and mat.

[@glenhynes3593]

Well worth the work involved

[@brokenbackunlimited2187]

Very nice job, that looks factory.

[@garykelley5030]

Good to have friends for a project that size.

[@PuddinsFabShop]

Absolutely. I couldn’t of done it without them

[@mrjimcolemanful]

Dude, you are freakin rockin it! I've been watching the build so far and I am amazed at what you're able to do out of your garage! You are truly an inspiration to me. I have a 1966 Chevelle Malibu I am doing a frame off restomod on. So far I have the frame down to bare metal and have welded a boxing kit in it. I have all the suspension components purchased to make an awesome handling machine. I also have a SBC 427 stroker motor (565HP) with a modified TH350 auto trans with a gear vendor overdrive system. Once I get that all done I will start on the bodywork on the car (which won't be much). All that's left is everything else... LMAO

[@PuddinsFabShop]

That sounds like a nice build! I appreciate you watching my videos and I hope they help in some way. The main thing I tell people they can take away from my videos is don’t be scared to go for it!

[@joell439]

Friends makes all the difference 👍👍

[@PuddinsFabShop]

They do!

[@joshtonry4291]

Nice work and great advise

[@PuddinsFabShop]

Thanks!

[@PeterHatch-mx7zc]

Watched again p.s new shops looking great

[@damienwalker1026]

Top job. really enjoying your channel.

[@markgriffin4888]

Just re- watching some old videos, and I reckon bead rolling isn't something you do whist enjoying a few beers😆😆😆 I could have sworn that I had "liked" your videos before, now it's showing that I hadn't???👍👍👍

[@daleszydlowski2371]

Howdy What helped make the decision to notch the tube instead of the cross members? I have been learning and watching ever sice i saw one of your vids a couple weeks ago. Cool content.

[@barrywood9219]

See I learned something. If you dont go all the way end to end with the bead rolls, your metal at the ends is wider than the metal in the middle because of the takeup caused by the beads. Thanks. This is good stuff.

[@jeaniepatterson2384]

Beautiful work!

[@77supervan79]

Looks great man, love the beads. I did an aluminum floor in the back of the van after building the back half chassis. It's fastened with screws, it being a uni-body I wanted the floor to be removable.

[@PuddinsFabShop]

That’s a good idea for a unibody especially. I really considered bolting this floor in but I think I’m just going to weld it. I’m still not 100% sure. I’m not going to finish it until I build the rear suspension tho.

[@77supervan79]

@@PuddinsFabShop good idea, way easier to work on the suspension with the floor out.

[@Recycledhooligan]

Looks good man that had to be a lot of work.but the end result is very nice.

[@tarbogas66]

Awesome job your doin ! Love your videos and the stuff you do on them cars. Thx for your passion and sharing it.

[@robertbisson9161]

Panel bond would be great for that floor.

[@kuhiomin9043]

The bed floor looks dope, the bead rolls are on point, gettin there man, proofs in the puddin 🤙🏾

[@PuddinsFabShop]

Thanks my guy!

[@apd5084]

sick floor

[@PuddinsFabShop]

Thanks!

[@THEBULK1023]

looking great , keep killing it.

[@PuddinsFabShop]

Thanks Tim!

[@Thejunkyard417]

Looks great! Awesome job

[@PuddinsFabShop]

Thank you.

[@ABTOPECTABPATOP]

Молодец

[@twadam5218]

LMAO @Bill at 12:50 !!!

[@shanewright6958]

Great job. It turned out sweet. Another great video 👍👍🇨🇱

[@PuddinsFabShop]

Thank you Shane!

[@juliopozo2824]

Yes TRUMP,,,, I just found your videos I watching all of them great.. you’re also very lucky to have friends to help you out. v Best advice you gave me “sitting on your as don’t finish your project” love it keep the videos coming Bro.

[@PuddinsFabShop]

Thank you for watching!

[@ericarnold5259]

Floor looks great man!

[@PuddinsFabShop]

Thanks man!

[@peerplaut]

Fantastic job!

[@PuddinsFabShop]

Thank you

[@87jstep]

Looks very good.

[@ponchopelayo77]

Killer work

[@PuddinsFabShop]

Thanks !

[@peterhatch1583]

Great work

[@stevestepanek9148]

That looks amazing

[@13SKULLWRECKER]

If you bead roll the back side lightly first you will lesson the distortion in the sheet as you pre stretch the metal so when you roll the face it will not distort half as bad Try it

[@PuddinsFabShop]

That makes sense. I don’t think I could make 16 passes to pre stretch and then another 16 and stay on target haha

[@dac2250]

That's a damn fine floor!

[@PuddinsFabShop]

Thank you !🙏

[@bigbosshoss8148]

Damn!!! Looks so clean

[@PuddinsFabShop]

Thank you.

[@gerrygwilson2849]

Man that is super cool

[@mikerobi6100]

very cool work

[@stevestepanek9148]

It would look cool using ceader like in the back of a truck bed with stainless strips but metal will work good

[@Chevy-ud1ec]

Awesome. looks really good

[@PuddinsFabShop]

Thanks!

[@laramiebarnhart9553]

Thanks for the idea. Think I might try on my project if you don't mind. But I have a question for you. You said it was 4' wide. When you do a bead roll or even shrinking does it take away from the total width? If so how do you compensate for it? Meaning for how ever the bead roll is wide or deep how much would you add back into the equation?

[@fishguts4247]

Looking good.

[@PuddinsFabShop]

Thanks creeper!

[@fishguts4247]

@@PuddinsFabShop LOL In your next video I want to see you rolling across the floor.

[@PuddinsFabShop]

Haha bet it will happen !

[@bobjapan7690]

puddin and friends getting it done

[@MrHotrodharry]

Looks Dam Good

[@murraydaniels3377]

I notice that you have an English in the backround. If you pre-stretch with the wheel on the lines where you going to bead roll. It will reduce the distortion of the sheet and reduce the need to then shrink the edge.

[@PuddinsFabShop]

The throat of the janky grizzly English wheel is not deep enough to run the panel through. I usually pre stretch when I bead roll. To get that panel through it I’d have to build the new frame for it.

[@rgbigdog]

I'm thinking your bead roll should be facing up. Looking at my pickup bed the factory bead roll is facing up with the larger flat portion touching the bed support.

[@PuddinsFabShop]

I wanted down not up lol

[@michael-michaelmotorcycle]

👍 Congratulations on hitting 3k subscribers. I think I was in the first few hundred.

[@PuddinsFabShop]

You’ve been around from the start! I appreciate the comments on the videos as always!

[@bambimcgee5830]

Looks great

[@PuddinsFabShop]

Thanks you!

[@brucebeaver6929]

good one

[@steveschumacher5470]

nice job, as always

[@PuddinsFabShop]

Thank you!

[@Voongi]

Very cool looks original. Its great to have friends that can help. Are going to have to seam seal that area?

[@PuddinsFabShop]

Thanks! That’s the look I wanted! The bottom will be sealed up! Seam sealer and some kind of coating.

[@abelburke]

Looks awesome!

[@PuddinsFabShop]

Thank you!

[@michaellemons5143]

Love it

[@richardcowan-e4y]

👍

[@lonniepitcock3440]

I hope this gets to stay. Looks like it should be a replacement panel from factory.

[@jameswelch7516]

What brand hammer is that I have one a blue handle not red like yours another great job keep them coming

[@PuddinsFabShop]

Which hammer?

[@jameswelch7516]

@@PuddinsFabShop the ones that look like a pliers

[@PuddinsFabShop]

😂😂😂 I don’t remember right off hand. That made me laugh

[@erichall8855]

Let's go

[@black88coupe]

nice work

[@PuddinsFabShop]

Thanks!👊🏻

[@Javierdos501]

This is dope thanks

[@petero2693]

Nice

[@ep9360]

Yeah.....I'm calling BS, on the, "not a metal guy". 😂❤

[@paintgunexpress1949]

SMASH THAT THUMBS UP 👍🏁👍🏁👍🏁👍🏁👍🏁

[@PuddinsFabShop]

And supporting as always

[@kevinwassellsr.5646]

Tongue and groove red oak Just sayin

[@ededmund5685]

ok

[@PuddinsFabShop]

👊🏻👊🏻

[@kevinblough2853]

the math is hurting my head :)

[@PuddinsFabShop]

🤠🤠

[@johnswick4593]

Very sanitary. Looks fack tree.

[@Pedroisanickname]

A lot of man hours in that floor. I'd of chucked some plywood in for the sound deadening properties, but your way is better.

[@PuddinsFabShop]

I thought about it for those same reasons! I just liked the challenge of it since I’ve never done a panel that big!

[@tennesseesyndicate5337]

Is that a miller 211?

[@PuddinsFabShop]

It is. They are great little welders

[@tennesseesyndicate5337]

@@PuddinsFabShop Cool im going to buy one today. Have a yard full of projects going to start my own channel. Any advice?

[@PuddinsFabShop]

Focus on what you want your content to be. How you want your videos laid out. I had a guy tell me that and didn’t really understand until like a year In. And stay consistent with posting. KZbin wants to see you uploading.

[@tennesseesyndicate5337]

@@PuddinsFabShop so what did he mean, cause i dont understand

[@PuddinsFabShop]

It’s hard to describe. But if you watch some of my first videos to the ones now they are very different. Figure out how you want to make your videos and what content is going to be in them. If you read on doing a successful KZbin channel there’s supposedly all these tips and tricks. Well none of them have helped me. Even tho I was trying them all. I started just focusing on my content and steady posting and it has helped. It would be easier to describe just talking versus typing for me lol

[@keithwilliams4247]

Hi, I just found your channel and subscribed and made it this far. Please, please, please bleep out your foul language. There are so many good youtube channels that I will not watch because they swear so much. Thanks.

[@knottstraw]

why not just use some 1" angle iron, instead of making 1" angle iron?

[@dwaynelejeune3508]

Another bad Azz vid.

[@PuddinsFabShop]

Thanks!

[@ManChildMaineiac]

Looks awesome!!

[@Pedroisanickname]

A lot of man hours in that floor. I'd of chucked some plywood in for the sound deadening properties, but your way is better.

[@PuddinsFabShop]

There is. I almost did the plywood!

[@Pedroisanickname]

@@PuddinsFabShop BTW, I recently changed my user name from, Peter Lyons (my government name) to a nickname, Pedro. I don't know if that is obvious here on YT or not, but, you had previously responded to the same comment. Kinda weird the way Google manages name changes, it seems to trip over itself a bit. Sorry for any confusion. Cheers!