Rear Stabilizer Link Bushing Replacement | DIY MonteroSport

[@NoahsGarage]

Products Used in this Video can be Purchased at the link below: www.noahsgarage.com/mechanics-tools/ Just search: Stabilizer Bushing Montero Stabilizer Bushing Montero (end links) 1/2 Drive Socket Wrench Set Flexible Head Ratchet Spanner Set Conventional Open Wrench Set

[@cyrusaplod6658]

LAKING TOLONG IDOL SALAMATS

[@SamelDaud]

Maraming salamuch boss noah. Andami ko nasave dahil sa tutorial niyo. Napaka laking tulong to sa mga May sasakyan na gaya kong medyo bagohan pa. at natoto na din ako mag diy dahil sa kaka subaybay ko sa mga blog nyo. Iba ka kc sa ibang blogger napakalinaw ng blog nyo sir tlga matototu yong manonood sayo. God bless you po sir Noah.

[@NoahsGarage]

Maraming salamat sir sa mga compliments mo. Dont forget to subscribe 🙂

[@SamelDaud]

Naka subscribe na ko ser. Gusto ko nmn ser mapanood mula sayo kung paano mag palit Ng timing belt Ng montero. Mas malinaw at na susundan ko at iba pang nanonood ng maayos pag ikaw.

[@NoahsGarage]

@@SamelDaud meron na sir kaso di siya diy. kzbin.info/www/bejne/i6e7laxmi9FkbJo

[@locar12]

Salamat sir. Lagyan rin po ng silicone lube ung rubber bushing sa stab bar para hindi dry rubber/dry metal kiskisan ☺️👍🏽

[@NoahsGarage]

Salamat sir Dont forget to subscribe 🙂

[@rommelcuento5501]

Big thanks sir to your step by step video tutorials, nakatipid nq sa maintenance at dami pa natutunan😊 salute to u sir and more power!

[@NoahsGarage]

Welcome sir Dont forget to subscribe

[@nostraware]

Sir cleaning naman nung turbo ni Accent! Thank you sa mga vids mo sir!

[@derickevangelista1434]

sir idol. may tanong lang po ako yung 2015 model ko montero umakyat sa park ng sm north sabay open light ko bigla hindi makaahon, at nu off ko light ko lumakas naman po.anu po kaya sira nun sir. salamat po

[@aureliosevilla7801]

Sir noah. Makalampag n harapan ko s ilalim sna me video k dn kng ano mga dpat paliran. Tia

[@NoahsGarage]

Usually bushings din at end links ng stabilizer sir. Dont forget to subscribe 🙂

[@alfredobalnegjr1973]

Toyota revo model 2003 ganyan din b kung magpalit ako ng rubber bushing sir thanks

[@NoahsGarage]

Yes sir. Most likely same procedure lang po. Dont forget to subscribe 🙂

[@ryanjaysamar5276]

Done Thank you very much Ang laki ng nasave ko Godbless sir

[@NoahsGarage]

Welcome sir Dont forget to subscribe 🙂

[@laavidity8339]

Advice ko sir next time gumamit ng colored pen to label the height of the thread used by the factory.

[@NoahsGarage]

Yes sir tama. Salamat sa tip. Dont forget to subscribe 🙂

[@ChaChasAdventure]

Nice eto yung kaya kong i-diy! Boss noah pati harap na bushing gawa kayo vid :)

[@NoahsGarage]

Hehe yes sir. Madali lang

[@habibmoctar2243]

Alam ko na pano gawin kulang nalang pera pambili ng bushings hehe student palang po ako first car ko montero 😇

[@NoahsGarage]

Congrats sa car mo sir. Dont forget to subscribe 🙂

[@prokopyomayora9976]

Sir may content kba about sa nilalagay na cushion buffer sa spring? Alam mo ba ano size para sa montero gen 2? Tnx

[@NoahsGarage]

Wala pa po sir e Dont forget to subscribe 🙂

[@wwillian987]

vc poderia fazer um video tirando os amortecedores traseiro da dakar(montero) 2014 ." could you do a video removing the rear shock absorbers from pajero montero dakar year 2014" .

[@NoahsGarage]

Soon sir. Dont forget to subscribe 🙂

[@wwillian987]

@@NoahsGarage já sou inscrito a muito tempo .

[@sherwinsumugat3947]

Front stabilizer link bushing nmn next bossing😁

[@NoahsGarage]

Soon po sir Dont forget to subscribe 🙂

[@paulalvinwage9808]

Boss noah good day tanong ko lang may lagutok kase montero ko 2009 matic pag biglang apak sa silinyador pag mabagal pero pag medyo mabilis wala na napalitan ko na mga stabilizer bushing at transmission support pero meron pa dn. Saan po kaya nanggagaling un?

[@NoahsGarage]

San nanggagaling ung lagutok sir? Could be sway bar or part of suspension. Dont forget to subscribe

[@geraldjlove6767]

Magandang araw boss..ask lang kung saan nakakabili ng polyurathane stabilizer link bushing for vios 2021? Ty po..

[@NoahsGarage]

Search ako sir ah Dont forget to subscribe 🙂

[@randyvillanueva1798]

Sir need poba naka jackup ang likod bago mag kalas

[@NoahsGarage]

Yes sir para madaling matanggal. Dont forget to subscribe

[@randyvillanueva1798]

@@NoahsGarage edi need po mg allignment ng gulomg ulet?

[@mayankthegod]

Sir, I watch your videos from India. It would be kind if you provide Close Captions in english. I also have same Pajero Sport.

[@NoahsGarage]

Ok sir. Sorry got lazy these past few videos. I will add english subtitle soon. Dont forget to subscribe 🙂

[@mayankthegod]

@@NoahsGarage Already a subscriber and I have watched most of your videos. I like the simplicity and the content.

[@albertoaragones5445]

sir noah regarding s wheel bearing ng montero ntin gen2 every what km dapat tyo mg p grease. pde b diy yn?

[@NoahsGarage]

Mahirap sir i diy ang wheel bearing. Kelangan ng expertise ng mekanko na sir at me mga special tools na kailangan. Dont forget to subscribe 🙂

[@larriecurpoz1734]

good morning sir ano po ba ang dahilan ang toyota revo efi engine no start

[@NoahsGarage]

kzbin.info/www/bejne/h6axdJmHhKakpc0 Dont forget to subscribe 🙂

[@rodelmanding3440]

pag magpapalit stab link bushing need po ba ijack pa ang oto? nakalift po akin

[@NoahsGarage]

yes sir kasi para ma leverage ka. Nakaharang ang gulong e Dont forget to subscribe

[@cantosprimo8241]

Good day sir noah, ask ko lng po syo kung anu ang specific sizes or required n tools for diy sa montero sports 2015, newly own lng po, thanks & godbless.

[@NoahsGarage]

DIY tools sir? Depende sa gagawin mo sir eh. Basically dapat me ratchet set ka sir 1/2 and 3/8 ang size. Then regular open wrench set. Mga safety tools rin such as goggles at gloves. dont forget to subscribe

[@binghakerdonato3840]

Sir,san po banda ilagay ung jak at ibang suport?sna masagot po

[@NoahsGarage]

kzbin.info/www/bejne/javQYZ6wo82SfKc Dont forget to subscribe 🙂

[@dannytor9916]

Salamat sa info sir

[@NoahsGarage]

Welcome po Dont forget to subscribe

[@arnelhachisuba1981]

Sir may suggestion po ba kayo kung anong brand ng gulong ang mura pro durable gusto ko sana ang arrivo kaya lang madali daw po maoblong ty po god bless

[@NoahsGarage]

Arivo ang Accent ko sir, ok naman. Arivo ang issuggest ko sa iyo sir Dont forget to subscribe

[@arnelhachisuba1981]

Salamat sir

[@intisampaga3365]

Pwede po sway bushing ng gen 2 sa gen 3?

[@NoahsGarage]

I believe yes po. Dont forget to subscribe 🙂

[@michaelangielochannel]

kelangan po ba tanggal ang gulong pag magpapalit?

[@NoahsGarage]

Yes sir para me leverage ka. Dont forget to subscribe

[@benitaberido4299]

Hi sir,ask ko lanh sana kung nahihinaan ba yung tunog ng lock unluck or napapalitan ba ng tunog

[@NoahsGarage]

Hindi po, default po yan. Sensitivity lang po ang naa adjust. Dont forget to subscribe 🙂

[@thecartinkerer]

sir sa pag palit ng bushing san ka nag jack? sa likod ng gulong or sa me chassis sa gilid? di pa loaded ang stabilizer bar baka pumitik pag luwag ty

[@NoahsGarage]

Sa jacking points ni monty. Pwede sa diffrential. See my other videos sir para makita mo jacking points or sa manual. Dont forget to subscribe 🙂

[@abdullahmabandes8165]

air palink po ng bushing, ung color black na pinalitan mo

[@NoahsGarage]

@@abdullahmabandes8165 invle.co/clb5zyx

[@edgarborja2871]

Gud am Sir Noah pwd sayo mag order ng mga parts tulad nong mga pinalitan mo sa Rear Stabilizer Bushings.Salamat

[@NoahsGarage]

Ito po sir invol.co/clb5zz6 invol.co/clfpeqc Dont forget to subscribe 🙂

[@SegundoJrLumabao]

boss pano malaman kung kailangan na palitan rear stabilizer bushing ng monty ko?

[@NoahsGarage]

Kapag may play sir at kapag me lumalagitngit sa likuran mo sir kapag lumiliko ka or nalulubak. Dont forget to subscribe

[@robertosibulo2548]

im looking for the link from where you buy the stabilizer link in lazada and end link bushing?

[@NoahsGarage]

invol.co/clb5zz6 invol.co/clb5zwy

[@jovencedrickposecion7076]

Sir, baguhan po ako sa mga sasakyan. Ask lg po kung bibili po ba ako for rear left and right stabilizer link dalawa lg po ba need?

[@jovencedrickposecion7076]

Btw, I love the video po! Keep up

[@NoahsGarage]

You are asking for bushing or the link itself sir? Kelangan mo magkabilaan po sir Dont forget to subscribe

[@jovencedrickposecion7076]

@@NoahsGarage nakita ko na po sa video mo dalawang clamp bushing ♥️ left and right

[@tenn4647]

patanong lng sir noah, hanggang 5th gear ba ang montero sport (AT) 2010?

[@NoahsGarage]

Yes sir 5 speed. Dont forget to subscribe 🙂

[@jeromecu4850]

Sir dapat ata lagyan silicon grease ang loob ng poly urethane bushing to avoid squeeking.

[@NoahsGarage]

Di ko na nilagyan sir kc hindi siya polyurethane, yellow rubber lang sir. Magfollow up ako sir kapag me narinig akong ingay.

[@aldwintaberdo5782]

Sir, regarding sa bushings, paano kaya malalaman if ok pa ang bushing sa front suspension naman?

[@NoahsGarage]

Alugin mo kung me play sir. Me video ako nyan sir.

[@jorgenalzarojr4403]

Sir kailangan ba talaga tanggalin yung gulong pag mag palit ng stabilizer link bushing.

[@jorgenalzarojr4403]

Salamat

[@NoahsGarage]

Yes sir para ma leverage ka. Dont forget to subscribe

[@chestinecerilla5664]

Sir jelly b yn goma n yn mgkno ung ganyan

[@NoahsGarage]

Mura lang po iyan sir, wala pang 200. Nasa description po ang link. Dont forget to subscribe 🙂

[@bloodsinrisk4773]

Sir Balance Arm meron na monty mo?

[@NoahsGarage]

Wala pa sir Dont forget to subscribe 🙂

[@Mamet2013]

Sir noah kaya po ba yan kahit hindi tanggalin yung gulong sa likod kapag stabilizer bushing lang papalitan ko?

[@NoahsGarage]

Masikip sir. Tanggal gulong sir

[@tawewet4524]

sir noah isang size lng cgro yan cla ng gen 3 nuh sa stab link bushing?

[@NoahsGarage]

Yes sir same lang po Dont forget to subscribe 🙂

[@ThrooGRV]

Sir matanong ko lang ito kaya dahilan na may tumunog pag nasa lubak dumaan? meron kasi tumotunog sa montero namin pag dumaan sa malubak na daan pag wala masyadong karga . pero pag merong karga hindi masyadong tumutunog. 2018 pa montero namin. hindi pa na palitan ung stablizer link sine nabili namin ito. :D

[@NoahsGarage]

Check mo sir ung physical na itsura ng bushings sir. Kapag putok na, palitan na po sir

[@ThrooGRV]

@@NoahsGarage Okay po salamat po.

[@abdullahmabandes8165]

sir yan ba ung tumutunong kapag sa lubag?

[@NoahsGarage]

Yes kung magalaw na siya. Dont forget to subscribe 🙂

[@michaelreyverana5566]

need ba nk jack stand sir pg ngkabit?

[@NoahsGarage]

Yes sir para maalwan ang pagbaklas at kabit mo. Dont forget to subscribe 🙂

[@gavinoangtv8212]

Thank you boss for this video👍

[@NoahsGarage]

Welcome sir Dont forget to subscribe

[@GARRYLOUIEATAUSA]

Dapat po nilalagyan nyo ng lock nut para sure.

[@NoahsGarage]

As is yan from stock design Dont forget to subscribe 🙂

[@OneilMonteroSports]

SIR PAGKATAPOS MONG PALITANG ANG MGA YAN KILANGAN BA MAGPA WHEELL ALIGHMENT ULIT

[@NoahsGarage]

No need sir. Dont forget to subscribe 🙂

[@OneilMonteroSports]

Sir wla ito sa topic mo itatanong ko sau. Ok lang aero metal guard sa engine Hindi ba ito nkkasira sa mkina. Lato sa sakyan ko Montero 2014

[@urvanairhorn]

Parang parehas tayo sir ng nabiling stablink bushing na yellow.

[@NoahsGarage]

Hehe mura diba? Wag ka bibili sa mga fb groups sa montero dahil mahal un. Dont forget to subscribe 🙂

[@urvanairhorn]

@@NoahsGarage naka free shipping pa nga sir. Shout out sa seller. 😊

[@Pogi-akho]

Hi sir noah, pag ngpalit ka stabilizer link bushings need pba e jack? Wala bang cocontra?

[@NoahsGarage]

Kelangan sir kasi sagabal ung gulong. Dont forget to subscribe

[@Pogi-akho]

@@NoahsGarage ok po. Subscribed na sir. Tnx

[@jandidelatorre2493]

Hi boss nag palagay ako atf cooler with fan skl hehe

[@NoahsGarage]

Patingin, send naman pic sa fb natin sir

[@jandidelatorre2493]

@@NoahsGarage sige sir pm ko po sainyo. Hehe

[@master_dyipoy1624]

Hi Sir Noah. Wala po bang exact na torque sa paghigpit?

[@NoahsGarage]

I have no idea sir kaya kung gaano kahigpit ang kalas, by feel na lang rin ang kabit. 😅 Dont forget to subscribe 🙂

[@master_dyipoy1624]

@@NoahsGarage all right thanks a lot Sir sa pagreply. Tagal na pong subscriber, truly helpful Sir mga vlogs nyo. Continue to be a blessing to others.

[@reydhenocampo9772]

Naka Drop po ba montero nyo sir?

[@NoahsGarage]

Di po sir Dont forget to subscribe 🙂

[@aldenjun9349]

Changing oil boss, and change tires

[@NoahsGarage]

kzbin.info/www/bejne/eZOrgYCHardkg7s kzbin.info/www/bejne/f3KbZImrd5pgq7s Dont forget to subscribe 🙂

[@spartacus457]

rear lng pinalitan nyo sir..? or pati harapan

[@NoahsGarage]

Rear lang po sir Dont forget to subscribe 🙂

[@marcoluigideguzman5210]

After mapalitan sir? Umokay ba yung feel ng suspension?

[@NoahsGarage]

Yes sir Dont forget to subscribe 🙂

[@earledwardfontejon5826]

Sir set na po b yn pag bumili ng rear stabilzing bushings?✌️

[@NoahsGarage]

Set na po ung nasa link ko sir. Pero separate po ang link ng end link bushings sa stabilizer bushings. Lahat nasa description po. Dont forget to subscribe 🙂

[@noseyloft]

sir noah update dito sa bushing after 1 year? thanks

[@NoahsGarage]

Ok po sir. Soon po. Dont forget to subscribe 🙂

[@patrickbatimana9509]

Hindi po ba masyadong mahigpit boss? Or tama lang?

[@NoahsGarage]

Tama lang sir Dont forget to subscribe 🙂

[@bynch4064]

Tuwing kelan po nag papalit ng bushing sir noah? Ano po ang advantage pag nagpalit?

[@NoahsGarage]

Every 50k mileage sir or depending po sa owners manual sir. Bushings help prevent metal to metal contact kaya malessen ang clanking noise sir sa ilalim lalo na kapag pakurbada. Dont forget to subscribe 🙂

[@jamilwilliamcervania9681]

Nice vid boss, request change engine support po sana 🙏🏻

[@NoahsGarage]

Soon sir. Dont forget to subscribe 🙂

[@Evoaquatics]

Nice 👍

[@NoahsGarage]

Dont forget to subscribe 🙂

[@luckyboyaraneta2027]

San nabibili sir

[@NoahsGarage]

Ito po sir invol.co/clfpeqc Dont forget to subscribe

[@Skull0023]

Rubber ba yan boss?

[@NoahsGarage]

Rubber sir

[@GARRYLOUIEATAUSA]

Hindi po kayo naglalagay ng thread locker.

[@NoahsGarage]

Sometimes naglalagay sir Dont forget to subscribe 🙂

[@ramonnabarteyjr9766]

Magkano magastos paps kapag mag paayos Ng stabilizer?

[@NoahsGarage]

Mura lang po yan sir. Depende sa makeniko sir. Siguro minimum 500 labor po. Dont forget to subscribe 🙂

[@kevinjunio3703]

Idol

[@ryanmahinay8077]

Sa hyundai accent naman

[@NoahsGarage]

Dont forget to subscribe 🙂

[@sicnarfbuen917]

kakapalit ko lng after 4 yrs and 6 months..

[@NoahsGarage]

Dont forget to subscribe 🙂

[@larriecurpoz1734]

bosa pwede po ba makuha ng contact number mo pls.