Rear wiper replacement on 2020+ Ford Explorer

This video is to help with a little less straight forward replacement of your rear window wirper blad on a 2020 and up Ford Explorer XLT/Limited/ST/Platinum.
If you would like the wiper from this video, follow the link below.
Rear Window Wiper Motorcraft WW1110 All Season Wiper Blade
ebay.us/OYiAZ0
Disclosure: As an Ebay Associate I earn from qualifying purchases

[@rivalstorm120]

Thank you. Never had a suv or vehicle with a rear wiper blade and was hella confused

[@pauljohnson1179]

Finally instructions that made sense. Works the same on my 2020 Edge.

[@SouthdownGarage]

Thank you!

[@TheBartholomewTeam]

Great stuff! I was about to break the thing and then I found this. Thanks again!

[@toddclifford2071]

This was a damn life saver video! i have the exact same color 2020 ST

[@johnbass1310]

Thank you for the honest video. The Ford Motocraft instructions lie !!! This worked on my 2016 Explorer perfectly. Saved me a trip back to the dealership.

[@SouthdownGarage]

Your welcome. I also found the instructions deceiving.

[@kirkandrew7853]

This is the most helpful video by far... thank you

[@thomasschilling5227]

Thank you...was about to break it until I watched your video

[@SouthdownGarage]

I'm glad it helped. Thank you.

[@toddfez67]

I would not have been that aggressive. Thanks for making the video.

[@SouthdownGarage]

Your welcome

[@NetworkXIII]

This was a great help, thank you so much.

[@justinsliker6995]

Thank you! It’s now June 2022 and the factory one finally fell apart. I’ve tried on several occasions to get the rear off but on a whim googled it tonight and found your video. Hopefully the Bosch replacement I bought stays, it doesn’t have the extra “latch” portion just the push on clip.

[@SouthdownGarage]

Glad it helped. I'm sure the Bosh one will be just fine.

[@paulanderegg5536]

@@SouthdownGarage My Bosch rear has been swiping clean and clear for 3 months so far so good.

[@bybcous]

Thanks

[@andrewhillman9632]

Great video, used it today to install a new factory blade 👍

[@SouthdownGarage]

Awesome, glad it helped

[@craigohlgren6875]

Just replaced mine with help from your video. Just like the other comment said, the new Bosch blade didn’t have the channel in it to attach and slide, just snapped straight in. Seems to be secure, however. Thank you for the video, because it want working per the manual!!

[@SouthdownGarage]

Your welcome, I ran into the issue when I changed mine where the instructions were not clear, glad it helped.

[@mexikanox1118]

What Bosch blade did u get

[@wyattparks8884]

Very helpful thank you!

[@michaeljoseph164]

Hi, I went through a car wash and most of the wiper arm and wiper broke off. I cannot find seem to find the the replacements. Your help would greatly be appreciated! Thank you for your videos!

[@davidevans4610]

You’d think after how many YEARS cars have had rear wipers, they make the arm flip up like the fronts do 🥹 never understood why there’s soooo little room to replace.

[@bessiefunk2037]

Do not buy the blade with that off-center notch, that's why you needed to wrestle with it to go sideways, get the symmetrical centered notch, pops out with flat head, straight down

[@maurergaming]

does the 2020 XLT explorer have a foot activated rear hatch?

[@fixaajets]

Trying to find the correct Motorcraft part number I’m having a hard time I have a 2020 Ford Explorer ST I need the rear wiper blade.

[@SouthdownGarage]

Please reach out to me by email so I can help look into this for you. [e-mail]

[@Emtwillie28]

What was the part number for the blade?

[@wyattparks8884]

I have the 2021 explorer the front 2 are b-26-2 beam and b-21-2 beam those are rain x expert fits rear is r-11

[@paulanderegg5536]

Did not work for me, had to shove a screwdriver in and twist, which physically snapped the old blade to get it out. This was after half an hour of messing wiht it to the point the original blade was bent like a coat hanger. :( *blade snapped off, not the mechanism on the car I should mention

[@SouthdownGarage]

I'm sorry it flighted you so hard. But glad you got it sorted out in the end.

[@paulanderegg5536]

@@SouthdownGarage I just have to remember that the old one is expendable and to just try not to break my rear window :)

[@Lynn11361]

Thanks to all of you people, I got it done! I guess it was so strongly in there, I had to use the flathead to loosen it. Then I employed the pull forward and pop out method. So easy. Thank you!

[@Emtwillie28]

And also where did you get it?

[@SouthdownGarage]

I don't know what the part number is, I just got it from ford

[@MrMilincho]

Ford OEM part #: LB5Z-17528-C (WW-1110 11”) I’ve a box in my hand Thanks for the Video! 😊