Rebuild Micro USB cable fast charging at home

Rebuild Micro USB cable faster charging

[@joselitoyee6517]

From "fast charging" 1hr 26m to "charging" 1hr 28m. You made it slower.

[@NINJA0K]

Ultra Fast Charging 1h 1m

[@imnotbeluga007]

The Nokia cable also has data pins, that's why it quickly switched to fast charging.

[@gibsonhax]

So what exactly happened here? Were the data sections removed and only left with power and ground? The phone said 1.5 hours until full charge yes but it never updated to fast charging

[@Cuhz-]

It still cut down from 5 hours hello did you not see the time

[@exploitallowed695]

Mine is 10h😂

[@rizwanaltaf99]

Not fast charging write on display

[@chembetter3002]

Time down

[@chonkik5754]

Because it's not a fast charing support phone

[@Çømbø7z]

​@Hakeem Ullah abi harami ur 😂 phone does not support fast charging bruh 😂😂😂 really man think bro go to Google matha and search about ur phone info

[@saulesaulytiene8394]

He think that all of us idiots, but obviously to you, you are😅

[@copyrightfreemusic2.058]

Pero cuando probó con el cable negro en la pantalla del celular si lo reconoció como carga rápida, y después de fabricar su cable, si redujo el tiempo de carga pero en la pantalla ya no salía las palabras de carga rápida alado del contador de porcentaje entonces ¿A qué se debe que ya no aparezca la palabra de carga rápida alado del contador de porcentaje de carga ?

[@elishaliangel8531]

Nice but..... You may increase the number of wires but again the current passing through the pins will be limited ??

[@MrDegsy69]

The true limit is the maxim amperage of the charger itself. Thick cables will only help to a point but more advanced chargers also need the data pins connected as well to monitor battery charge management as well.

[@esrefbaloglanov]

This fake i am make thats but very medium charging

[@suryapatnaik5720]

For fast charging u need to connect D+ D- pins also.

[@visionofwellboyofficial]

He already did.

[@williamlaufman1895]

@@visionofwellboyofficial no he didn't

[@gibsonhax]

@I'm not Beluga I don't see how this is possible, with power exchange the phone and charger talk to each other over data pins, once charger and phone both verify, the charger switches modes and starts sending more than 5v, 9 volt is the next step up, then 12v. With newer quick charge and power exchange models you see 18v all the way to 45 volt, if the data lines are not present, the charger will stay in 5v 2a mode, which will about 4v and 1.6a of power to the phone, which is still regular charging. The only thing the process in this video achieves is removing itself from a data transfer cable which the phone believes it is plugged into a laptop and forces itself to charge at 500ma, or .5 amps, which if your phone charged at all would take 6 hours

[@lyteyearz5810]

Yup, increase the wire gauge. Cheap cables come with really thin wire gauges.

[@ChillsVibeshorts]

I will watch this after 3 years😀

[@utotmoblue6709]

don't invent or experiment with your charger, it's amazing, just buy a 5a/6a usb cable for sure and your cellphone won't break.

[@ravennevar7067]

Here yes i am wondering how much more charge will be over load?

[@perceive8159]

This approach is correct increasing wire gauge will allow more current to pass through BUT the power bank must be a fast charging type with a port designed for fast charging. If the cable is a standard thinner gauge a fast charging power bank will automatically go to slow charge mode as it senses resistance in power transfer 😉

[@gurdipsingh7506]

Pl write me from where i may call for as, i am disable to move and to get by hand

[@BigSm0kee]

I don't understand

[@mohammadahnafhaque]

Fast charger needs cable data support.... Because to transfer battery status to the charger or powerbank.. When done the charge fast...

[@unracker100]

If current is exceeding capabilities of unit potential to cause fire or damage equipment. This will work but monitor closely

[@reikiandlawofattraction4225]

Now wow nice idea 💡

[@dorbin101]

with first cable your phone is saying "charging in 1 hour 26 min" after modification it says "charging in 1 hour 28 min" . so it basically slows down the charging process. i dont understand how it speed up charging

[@CreativeAndDuck]

There are two cable in video, you can watch video again, friend

[@imnotbeluga007]

With the high quality Nokia cable, it instantly switched to fast charging, because it had data wires, the phone and the charger use them to enable fast charging. But the cheap crappy cable doesn't have data pins, so it didn't switch to fast charging. By doing this, your phone will charge at the fastest speed possible without being in fast charge mode.

[@lala0pray752]

@@imnotbeluga007 did the nokia charging cable supports other devices

[@lala0pray752]

@@imnotbeluga007 hey beluga do you have any social media exept insta and twitter or reddit

[@lala0pray752]

@@imnotbeluga007 do you use telegram?

[@eddyyu7091]

This is a very good way to increase the charging current with thicker wires. Good job !

[@stulacsystems]

micro usb cable price literally only us$ 10cent in my country, and 20cent already got you some quality cable

[@kangmanor-uz3wf]

You need both the Male USB and Male Type C to have a high wattage rating in order to make this work. Although using thick wires on both power pins are correct because there's more room for current to flow you still need the Data pins to make it a fast charging because todays fast charging adapter/brick does not give all the power to the positive and negative power pins it utilities also the data pins.

[@binaryglitch64]

No data line so that the charger and phone can communicate about voltage and amperage capacities? You know that's part of the fast charging standard for most fast charging protocalls right? If this technique didn't work for you, that's likely why. Just say'n.

[@fpsph4446]

PUT THIS IN TO HEADS GUYS.. HEADS UP! ALWAYS REMEMBER THAT IF YOU SEE VIDEOS SUCH AS EXPERIMENTS AND DIYS FROM INDIANS, DONT YOU DARE BELIEVE AND DO THE SAME THING. MOST OF THEM ARE SCAMMERS. WITH RESPECT TO THE REMAINING GOOD ONES OFCOURSE!

[@Random_Mii54]

What about usb type c?

[@IAGMRevenge]

When I do that shit my cables always go wrong with the time.

[@faizkun4889]

red positive + black negative -

[@geralddillon5746]

That seems like regular speed charging at around 1200mAH ...shouldnt Fast charging say fast charging at around 1600 plus mAh ?

[@chaikinlecahi]

How to know the speed charging ? one minute charging to full?

[@rp.d2xrk]

How i can make that liquid?

[@almirajinjer8884]

Im just gonna buy a latest fast charging phone to make life easier

[@danny-el528]

A ver si esto funciona para recuperar la carga rápida

[@Theracles]

WHY does that work? Do the female to female sockets share the same pin out arrangement? I'm wanting to convert a "Battery case" from my old phone into a universal battery backup. It currently has a Male Micro USB Out, so I need to make a flying lead with Female micro USB socket on one end to plug into it, and a standard USB Female type "A" socket on the other end for the output. ...Sound reasonable? The 4000mAh battery (14.8Kwh) output is noted as 5v @ 1.6A max The existing Micro USB female input is fine for charging the case battery, but for general back-up power duties a Female USB "A" Out is more useable for a wider variety of items. Can you advise me?

[@imnotbeluga007]

It works, because high currents going through cheap thin cables creates big power losses, and the phone will limit the current or the cable will overheat and burn out. By using thicker wires, resistance (and power losses) will be smaller, the phone will detect this and charge at the highest current it can take.

[@gibsonhax]

@@imnotbeluga007 is this written into software? I have a phone on android 10 that quick charges on my cord, I have another of the exact phones that is on android 11, same charging setup but forces charge at .5 amps thinking its plugged into a laptop

[@soniadelapaz8351]

Ask chatgpt

[@PVZBlover]

This also doubles up as a Juice Jack-proof Charging Cable

[@ronaldmarcellana2643]

USB cable 4 pins fast chargers but 2 pin slow😢

[@NINJA0K]

it's 5 pins on *Fast Charging* for the true!

[@Charris2007]

what type category mm cable you use ..?!

[@DadiszFekete]

i guess simple audio cable, the higher width the better.

[@MuhammadDaudkhanTV100]

Fantastic idea and cool content

[@Raju-qd8sc]

Great idea From mr experiment boy ❤️

[@j233wfyw]

fast to charge and fast to explode

[@hatemalrwasdeh6785]

موسيقى مزعجه جدا

[@mariusc131]

i already done that. The problem with that type of connector if the grip.

[@et3rn4nl42]

Yo no sé si es verdad pero muestra que es carga directa

[@franciscomaliqueo]

ami tambien me parece fake, dado que no dice fast charger como con el cable nokia

[@exploitallowed695]

thicker cable, higher resistance, more amps flow, faster charging

[@muhammadbaqirali7119]

yee pin charging ki kahan say milay gee.

[@fugussss]

lol hahaha is fake video hahahaha

[@lestherjohngpelomino2249]

Your GANA break your phone

[@chadunderwood.]

what r all the wires 4 if all u need to charge it 2 wires😢

[@darby4526]

the black micro usb cord is fast charging while your DIY is not fast charging sino lokohin

[@SerYanOto]

Where is ground? 0_o

[@chandraprakashgupta4640]

Sir wire kitne mm ka le

[@bkkrishanhatria6066]

More current flow in 4mm wire

[@saptobudiyono2303]

Ok sudah paham

[@GodGoblin]

آیا نوع و جنس سیم اهمیتی دارد منظورم این است که اگر بخواهیم به گوشیم را به لپتاب وصل کنیم آیا انتقال دیتا ها و داده ها بین موبایل و لپتابم ممکن است یا خیر؟

[@exploitallowed695]

Mine is 10h how do i fix my çable

[@TW39]

What wire gauge size u use

[@imnotbeluga007]

16 AWG I think

[@northstar5934]

I think 22 AWG

[@dgpfixerhemanthkumark1342]

Dp dn

[@rehabkells6153]

What is name of thing ,wrap a wire and burn

[@uptopgaza3608]

That the same thing the first charger where showing u

[@chandraprakashgupta4640]

Sir wire kitne mm ka le

[@sarkartv9286]

After timming is 1 hour 28 mint

[@NINJA0K]

It's a *Galaxy S6*

[@trollmarlo]

Good, successfully you are ready to destroy your battery's life

[@mariabeatricepaderog1058]

Can i ask for the materials needed?

[@gabrielrubio5105]

No mames

[@subhadattan.kishore5891]

This creator needs Need help 🙄😐🙄

[@cartoonheaven733]

Wire name

[@SHEYAO-f8l]

Will it cause any effect to mobile???

[@wan_x]

Does it work?

[@pirusyasayesh5178]

Thank you. Happy new year 1400 norooz :)

[@vvo1978]

oh my god!

[@mayurvn6848]

🤩🔥🔥 Awesome

[@aubrymacielpereirafilho3017]

Valeu muito obrigado!

[@shahalam1426]

Nice video 😮

[@mobilegurujee]

Kam nhi hai,,,,,, kya.time to same dikha raha hai

[@kingsleyadjepong985]

Irrelevant video

[@NEKO_COCO]

Great 😺

[@jerseygamingtv3537]

No changing at all

[@OmarMohamed-yp9yr]

Thank you

[@sharukhmatekuki5830]

Nice 👍🏻👍🏻 🇮🇳 Kuki 15|06|2022

[@zulkhairiabdul850]

Very good job

[@BabylonPatrol]

cool

[@BenSunMobileCare]

Wow.. Great job Bro, you did it❤❤❤

[@biproroy5156]

Kya Benifit Huya Sir.

[@dinorkodejaay977]

do de consigo esas pinzas

[@shamimrahie020]

No

[@NINJA0K]

No Fast Charging. thank you.

[@victorcallender1311]

Thanks.

[@ایدهوترفند-ش7ف]

👌👍

[@anmolbaghel8481]

Thanks bro

[@traylangford8403]

How are people thar are clearly not observant at all, so quick to type "YoU GaInEd An ExTrA 2 MiNuTeS" I mean did you even watch the video? If not I encourage you to pay attention to the beginning where the initial charge time was 3hr and 39 min. 🤦‍♂️

[@SumitSumit-zu5xc]

🥥😍😍😘

[@VtuberRex]

The data must be connected on your cable to enable fast charging,

[@Angel-tg7zj]

You can not solder data cable if the micro USB connector does not have them, it is only positive and negative. But it will charge fast since the thickness of the cable allows the passage of more mAh

[@hamidulhaq166]

How to make ur cable slow first time 1 hr 26 after making fst crgr 1 hr 28 min XD

[@imnotbeluga007]

The first high quality Nokia cable HAS data pins, they are used to ENABLE FAST CHARGING. The cheap crappy cable DOESN'T HAVE THEM, so it couldn't switch to FAST CHARGE MODE. It works because THIN CABLES naturally have a HIGHER RESISTANCE. This resistance creates POWER LOSSES and VOLTAGE DROPS, and the phone detects this, and it decides to CHARGE SLOWER, to prevent the cable from OVERHEATING. By using THICKER wires, the phone doesn't need to limit the current, because power losses have been significantly REDUCED, so the phone charges as fast as it can handle without switching to fast charge mode.

[@Dimitriy102.]

И чего ты тут показал, телефон ещё дольше заряжаться стал,

[@aminulislam1778]

fast kaha se huya .. pehle tha 1 h 26 min. ab show kar raha he 1h 28 min. kohi bhi try math kar na

[@CreativeAndDuck]

0:14 friend :D

[@zakariaaitrahou9854]

1h26min To 1h28min Nice you will wait two minutes more to change your phone

[@CreativeAndDuck]

It is 3h39min to 1h28min, friend

[@NINJA0K]

It's *Galaxy S6*

[@NINJA0K]

@@CreativeAndDuck You phone is Galaxy S6