Rebuildable/Replacable CE4 clearomizer - How to fill, replace, and tips for use

www.canadavapes...
Our newest cleaormizer option is the re-buildable CE4. Instead of throwing away your CE4 when the heating element burns out, you can simply unscrew the base of your clearomizer and unscrew the heating coil and replace with a new one. Howie shows you how to remove the heating coil and how to replace it quickly and easily.

[@mikewebb4855]

The disposable ones can be replaced, I just did it using a coil from a tank that the threads had gone so was unusable but the coil was good, you say they can't be taken apart but this is untrue, take the top off, pull out the rubber seal that covers the 2 slits on the centre piece, u can now put a small straight head a screwdriver in and place it on the centre metal piece then tap it with a hammer or even your hand, the hole inside will then pop out of the tank giving you access to the coil

[@scottmcdowall4230]

Exactly how I do it minus the hammer, I just slowly apply pressure till it pops out. you could probably save yourself hundreds of £ a year with a ball of Cotton yarn.

[@Advection357]

Would you recommend the CE5, CE4 or the MT3 rebuildable tanks?

[@afyakatsukihafiy5539]

sir what is size kanthal for Ce4?

[@rgolianeh]

What brand is good you think?

[@EmeraldPlayzGames]

Mine doesn't unscrew what do I do?

[@kaiser7637]

It's ok it's not online under ce4 it's actually considered to be a ce5 clearamizer (Super cheap on ebay BTW)

[@fahimmuttakin3343]

Unusefull