Rebuilding a Pre-ELOG Low-rider Peterbilt 379 | "AND IT'S OFF" Part 15

[@tsimmons1974ts]

I'm a 20 yr trucker, and I really love how you young fellas are taking time to bring those old irons back to life keep it up 👍🏾👍🏾👍🏾

[@allz3garage627]

Thanks 👍 Old School Cool!

[@robbie71w]

Just found this build. You boys are dynamite! Great job! I’m sure your family is awful proud of y’all.

[@Mordrayso]

I've never been a fan of silver, but on that truck, it looks great! I really enjoy watching you kids work. Well done and thanks for sharing.

[@allz3garage627]

Thanks 👍

[@Eastondanic]

Love the truck

[@allz3garage627]

Thank you! It came out awesome!

[@banzaii6285]

You guys did an awesome job...ol truck looks pretty sharp !

[@allz3garage627]

Thanks 👍

[@stevenholland9984]

Great job 👍👌

[@allz3garage627]

Thank you! Appreciate the support!

[@danielloveall2952]

Great Job Fellas

[@allz3garage627]

Thank you!

[@illphill5588]

Truck is beautiful guys it’s came a long way

[@allz3garage627]

Yes it did! Appreciate the support!

[@peterbiltfan1153]

I love the jakes on that truck

[@allz3garage627]

Old Detroits rattle!

[@tygaskill9183]

Truck look really good like the silver

[@allz3garage627]

Thanks 👍

[@lloydrobinson7081]

Awesome project guys, a really good looking truck. Keep the videos coming

[@allz3garage627]

Thanks! Will do!

[@bruceleonard81]

That truck looks great, when I had a kenworth or Pete I had sitting lower I had some 2x12 wood blocks it would start at 2” then 4 in up to 10 inch for my big butt to get under the truck. I had rope handles to drag my blocks but it worked to give myself room under them.

[@allz3garage627]

HAHA!! Might invest in some truck lifts soon!

[@bruceleonard81]

At work we have 6 that can lift a truck 7 ft. Pretty cool. I was cheap wood blocks lasted me for years.

[@Mikey52321]

Looks awesome...what a transformation! I can't wait til I can build my own

[@allz3garage627]

Go for it! Appreciate the support!

[@Hipp50]

Great job guys look forward to the next build!

[@allz3garage627]

Thanks! 👍

[@johncoleman5128]

Congrats guys I think you did an amazing job on your truck, so for those who have a problem with that can take a long walk on a SHORT PIER. LOL Glad to see the young generation keeping trucking alive 💯👍👏🚛🚛🚛

[@allz3garage627]

Thanks 👍 Appreciate the support! We wouldn't want to be doing anything different! Sure is hard work, but worth every minute!

[@charlesferebee4875]

WICKED BAD ASS HOT ROD. ! ! ! WELL DONE. ! 😎 🏆👍👍🏁

[@allz3garage627]

Thank you!

[@diegohenriquez9216]

Allz3 Garage excelente video

[@allz3garage627]

Thanks 👍

[@donmccord]

Nice boys looks great!!! Get her polished up and you’ll be ready to rooster cruise 🐓!!!!

[@allz3garage627]

That's the plan! #LeftLane

[@ralphromair5176]

Great job on your truck re-do! I may have missed something, but where do you refuel the tanks?

[@allz3garage627]

Good question! We are going to have to trim up the rear flap on the drop panels!

[@mraewfan01]

Cant wait to see this truck

[@allz3garage627]

HAHA!! You are welcome to come over anytime!

[@maximilianrockefeller8854]

I for one am a fan of the bumper lights. More chicken likes!!!!

[@psavel274]

I like them too, the drop bumper lights do look good, but I think you're right, they'll probably get sheared off eventually. I think one of youz guyz mentioned it before, but if you changed the turn signal from the amber lens to the same style clear LEDs that would totally complete the look, and it would be extra clean. I think the clear lenses look amazing next to the silver paint.

[@allz3garage627]

HAHA!! Appreciate the support! Agreed more lights!

[@allz3garage627]

I agree Pete!

[@gregholmes3661]

Polish the wheels and tanks and I’d say you got her done. Looks good

[@allz3garage627]

Agreed!

[@jamesmcfayden9778]

Good job I love it

[@allz3garage627]

Thanks!

[@zippykimball3769]

I would definitely drive that!

[@allz3garage627]

Thanks Zippy!!

[@k.t.c.t.c.4104]

🔥🔥💨🧡💛🧡💨🔥🔥 dang hot smokin' bad ass coal trails dude 5:10

[@tonynorris1250]

The driver of that unit should be one happy guy! Good job fellers! Couldn't ask for better. You guys have great eyes for rollin tin! 💥💥🤙🤙🤙On to the next one! ✝️✝️✝️❤❤❤🙏🙏🙏🇺🇸🇺🇸🇺🇸⚒⚒🛠🛠

[@allz3garage627]

Thanks 👍

[@Tyler-xe1es]

Not sure if I missed it or not, Are you guys changing the turn signal to white so it matches. or going to some round headlights ??

[@allz3garage627]

Yes we are!

[@fredcity9725]

Im 30 minutes wests of Cleveland would love to hear this piped out im have 1979 w9ooa model restored

[@allz3garage627]

Send us an email! Would love to check out the old A-model!

[@brianscott755]

Will y'all ever do a cab over?

[@allz3garage627]

Yes we will!

[@chrise3801]

Awesome job looks great to me 👍👍

[@allz3garage627]

Thanks 👍

[@IWU447]

That truck looks really nice, we are also working on our 379 and I might post a video of it once it's mostly done on my other channel.

[@allz3garage627]

I will check it out for sure!

[@joshcrouch9298]

@Allz3garage. Are the stack brackets bolted through or just to the side of the truck?

[@allz3garage627]

The truck is a non-unibilt, so the stack brackets are bolted to the cab!

[@joshcrouch9298]

Allz3 Garage 10-4 thanks for clarifying

[@yz125man101]

Tip of the trade. Pull the truck up on a 4x4. You’d be surprised how much easier it is to get under!

[@psavel274]

This does work great! I used to have a 'staggered' stack of a couple boards for each tire on both sides. You can even screw them together and then you won't have to worry about them sliding. I used them all the time, because they worked that well. My main clientele was mostly alot of track car preparation/ slammed suspension configurations for customers, and i have also owned a few track weapons that I built. Think low and stiff with tons of aero parts. Most of the stuff was low enough where the lift arms or a low-profile aluminum racing jack wouldn't even make it under. Lmao. The truck is looking fantastic! Great attention to detail fellas!!! Keep it shiny side up and keep on gear jammin!! 😃

[@Tyler-xe1es]

If you gotta change a duel on the back just slide a 4x4 underneath the opposite tire and it lifts it enough to change. No jack needed haha ! Great tip for the young lads 👍🏼🍻

[@clayames7414]

Pretty truck! What motor is in it?

[@addicted2web]

Luv it! 👍

[@zippykimball3769]

Lites, if it ain’t bright, it ain’t right!!

[@TheRoadhammer379]

Overrated, some trucks look awesome with chicken lights. This just looks streamlined

[@allz3garage627]

HAHA!!

[@brandonjones1341]

You guys did an awesome job but the aluminum polish needs some work! You get someone that knows what they are doing and it will send it over the top! Good job guys you did amazing truck looks awesome for what you have done!!! Love the videos

[@allz3garage627]

Thanks 👍

[@malcolmgordge8550]

Guys top marks on the aesthetics and look of the machine, its a '94 - how is the technical condition of the truck? If that's good for 1,0 m km's more this is a good investment.

[@allz3garage627]

Truck has a fully rebuilt 60 series Detroit! Only has 600k on body!

[@joshuagrimes4470]

Putting fuel in it is going to be a pain it looks like be looks great y'all

[@allz3garage627]

We are going to have to put a hinge on the rear flap of the drop panel! Similar to what the Kenworth trucks have!

[@lumberjunkee8451]

Looks great, guys......if it were me, I'd change that signal lite, on end of headlights, to a clear lens.....would match the rest.....👍👍

[@allz3garage627]

Good call! Chrome Depot here we come!

[@truckinginjamaica9993]

Machine👍👍

[@allz3garage627]

Machine it is!

[@georgetoma7139]

@@allz3garage627 hello. Hy guys, get some cutting oil at the hardware,that WD40 is not the stuff for drilling holes.

[@edgarperez614]

Very nice 👍! Question, how you gonna fuel up the fuel cap it’s hidden?

[@stephendahl1594]

I was going to ask that too. Love the truck though.

[@banzaii6285]

I saw that too...I think it's just aired down, no air in the sleeper bags. It'll raise up enough.

[@allz3garage627]

Good question! After the truck airs up there is enough clearance!

[@llodyshaulage6501]

I’m jealous of your truck 😍😍😍 Great work bro I love it 💯

[@allz3garage627]

Thank you so much!! Appreciate the support!

[@onevoicej.o.p8075]

Truck look great...I think it need more lights

[@allz3garage627]

Maybe we will have to add some!

[@mr.g8367]

What is a price?

[@allz3garage627]

HAHA! Send us an email!

[@luchnit.9231]

Im still waiting to to see a low truck..

[@allz3garage627]

This 1990 will be getting a lot lower with some front air ride....

[@luchnit.9231]

@@allz3garage627 lets see.. keep up the great job

[@powerhouse_customs_ar4889]

Needs more lights in my opinion

[@allz3garage627]

HAHA!! I agree. We need some underflow!

[@stephendahl1594]

Keep doing what your doing and I will keep watching.

[@allz3garage627]

Awesome, thank you!

[@basstec2004]

BRO...YOU SURE THOSE STACKS ARE BIG ENOUGH...🤣

[@TheRoadhammer379]

Funny how guys point out tearing up bumper lights, yet I see a lot of sweet rides with the low bumper lights. I guess it's a driver issue, tearing shit up, if you tear them off, you were probably going to f*ck up the bumper at that point anyway. Great job young men, she's a head turner.

[@allz3garage627]

Thanks brother! You are the man!

[@pokerkinggg5455]

Might want to polish them wheels tanks and boxes it will make that silver pop

[@TheRoadhammer379]

no shit, I think they know that

[@pokerkinggg5455]

@@TheRoadhammer379 fuck you talking to tha youngsters not your dumb ass

[@allz3garage627]

Agreed!

[@woodycash6585]

💫

[@talltrucker1031]

Looks amazing..... but how in the heck is the driver gonna remove the fuel cap and get the fuel nozzle in the tank???? 🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️😂😂😂😂

[@devin1989100]

Ya something gonna hafta change...😂

[@talltrucker1031]

devin1989100 might have to consider moving the fuel tanks back about 8 inches to a foot.

[@TheRoadhammer379]

Yes, they have discussed this in previous video

[@allz3garage627]

We are going to cut the drop panel!!

[@danakibby627]

You’re right the trucks yours but those lights don’t make that bumper better

[@carlosaguirre1313]

Friends Good afternoon Crear job , congratulations Carlos Aguirre Quito Ecuador South America 28 August 2020 17:19 hours

[@allz3garage627]

Thank you! Appreciate the support!

[@moriorinvictus173]

Every one loves low shit I think it makes shit look bad

[@allz3garage627]

On certain trucks it looks good, on others it may not! All up to the drivers preference!

[@moriorinvictus173]

Well if your just using it to travel it might be cool but to get shit done take a higher truck

[@jasonmyers3847]

I bet that roof is all scratched to hell, by now....

[@allz3garage627]

Roof polished out just fine!

[@undecidedtrucking]

First

[@allz3garage627]

HAHA!! Appreciate the support brother!

[@1wtrahan]

Tang guys wear you r safety glasses drilling , and yes you caught me watching and not subscribe awesome truck now you gotta chrome the rims

[@allz3garage627]

We will be polishing them up soon! Cant send it down the road like that!