Rebuilding A Vandalism 2010 Ducati 848 (Part 4)

[@CJMediaOfficial]

Many of you have asked about the solderstick: so we got a discount code for you guys Get Solderstick at 20% OFF with discount code "CJ20" at www.solderstick.com/sale.

[@noorazimghazali159]

One of the reasons I like to watch CJ Media is his work always clean&tidy👍

[@CJMediaOfficial]

thank you! My neighbors call me "Mr Clean" lol

[@PCP250cc]

​@@CJMediaOfficial😂😂

[@ullasullas2925]

He got the complicated bike ever

[@LandoCalamando40]

One of the complicated bikes of all time

[@northwestfpwl3454]

The complicated bike ever.

[@PCP250cc]

Why? What do you mean?

[@armorkings4857]

I got a 899 and its a hell to work on it. And I been doing all maintenance myself

[@streetlegalbuilds7644]

Looks pretty simple to me. Motorcycles are the easiest vehicles to work on.

[@afriyanto9967]

INDONESIA 🇮🇩🇮🇩 menonton mu selalu CJ 👍👍👍👍proses yang sangat panjang, yang pasti hasilnya sangat memuaskan 👍👍👍

[@LUGA6]

Nice project man, timing the belts is much easier with the special cam-blocking tool (Ducati=Special tools ...) This way you can loosen the 3 screws on the pulleys to apply the same belt tension all around the system, then re-tighten theses 3 screws on each pulley, turn the motor few times and re-check the tension. Anyway if your timing stay right after installing the new belt it will work I have a 1098 Streetfighter S and a 1198S Corse and i can tell you will love the bike, you should bring it to the track it's the perfect bike, not overpowered but very precise Cheers from France

[@darrelllee3291]

I thought that you were a pretty good mechanic. I was wrong. You are a great mechanic!!! Your passion for bikes is what drives you! Can’t find that everyday! Nice video! Definitely a supporter here ✊🏾

[@CJMediaOfficial]

You had me in the first half 🤣☠️ thank you Darrell 👊

[@kleidtomasse]

I have a cousin in bologna who used to work in ducati for the quality control department and I’ve been asking him for help for the desmo service and the belts and the conversation has went on too long than normal due to the language barrier until I saw this youtube channel (practical enthusiast) then I understood what he was saying and right then I got most of what he said and instructions.. dude even sent me shim kits and only paid for shipping.. he probably saved me more than $3k in ducati service costs over the years😂..

[@TEENTHUGS]

Hey man, love your work following you from so long. I don’t even remember but love to see a video every time

[@callofdutymobile_ummu_ji]

Santiago is hero of this video😂

[@craigfrancis9578]

Nice TV show on a Sunday morning

[@Topendz]

I have to say fantastic job. I love that there isn’t anything you won’t attempt, nothing intimidates you… well done. Your an incredible young man!

[@subhajitsarkar4432]

I am so excited to listen the bike sound

[@EscoBlackJosh88]

Can't wait to see this come together. I need to get mine back up and running so this is definitely giving me motivation. 🙌

[@fernandomoreno1621]

The Master Electronic Technician doing his thing again. You make it look easy, but it's a tough and techinical job. I love the attention to detail and all the fine work. Keep up the awesome work.

[@johntreloar8203]

Cj, Who makes Super Clean, it does a great job on the engine...

[@findingpeace437]

Bro we the supporter can't wait to crank it... Kindly repair it fast...

[@xAbhimanew]

i was so eagerly waiting see it start up and he said "catch you guys in the next one'.

[@mac.macchiato]

my goodness! it's coming to life. im super excited on this project!

[@Deusétudo78]

Muito bom ver seu cuidado com a limpeza continue assim!🎉 🇧🇷🇧🇷

[@williamforbes7156]

@7:20 I literally have the same wrench but recently saw a tool shootout where it comes under fire for large variance in torque output more than 2-3% claimed. . . might be worth an upgrade. I see some baller electric ones but also OG Analog dial wrenches are great as well. love the bikes and your content, ride easy bro.

[@Dan-wh5iw]

Least nobody can say you don’t do things properly🙏 good job mate

[@philipsoons9100]

Love to watch your video's. I am rebuilding my SV650 and get really exciting watching this. Greetings from the Netherlands!

[@Jebstae]

Looking better now!

[@seanylewl]

Just for the record, 'throttle by wire' means electronic throttle. As in, the signal is transferred via electrical wiring rather than a mechanical connection - thus, throttle by wire. The kind you of throttle you are talking about is called cable actuated throttle, or just cable throttle.

[@Heri.y-ub7pz]

Love from Indonesia❤

[@ragadventures]

great work...cant wait to see all of your bikes running...🥰🥰🥰 #fanfromphilippines

[@b3nd3rwelds15]

It's a blast leaning new things ain't it. And technically that bike is throttle by cable and your others would be throttle by wire I personally like having a direct mechanical connection with my carbs lol I like the old school stuff still running carburators

[@lucazucchetti7886]

Check and modify the connector of the stator (the 3 yellow cable near ECU). It’s common they get burn!! Cheers from Italy ✌️

[@itssavagejayg9258]

Amazing work . I can't wait 2 hear what it sounds like .

[@passione2ruote107]

Complimenti bravissimo!!!

[@snikwadRR]

Ride by wire is what your other bikes have. Cable throttle is what your 848 has.

[@CJMediaOfficial]

right, i didnt get the wording right thanks!

[@Oneslowsi]

@@CJMediaOfficial hey make sure the throttle cables aren’t tight when tuning left and right on the bars. So you don’t have throttle hang when turning!

[@uiminging1641]

Can't wait to start the engine & check the sound 🔥✌️

[@davidbell4626]

Great work on the most difficult bike ever.

[@askari1814]

bro, that cleaner spray ur using, can u give details, it looks like a good cleaner

[@julian23561]

I find it hilarious that the timing belt has to be tuned like a guitar string. Them Italians are something else, lol.

[@CJMediaOfficial]

hahah they are smart tho

[@stega1]

I dunno...is that the only way to check the belt tension? I guess too many varialble, how good is the gsm mic, where you hold gsm, how strong you pitch the belt,... is there anothet way to do it?

[@naveenwijesinghe129]

Awesome man❤ love you from sri Lanka🇱🇰

[@kenjohnblogger4383]

Nice evening watching TV from Philippines. Motor repair

[@davidtalturejman9185]

Thanks once again for the amazing content CJ, You make me smile

[@BigGunTexas]

Awesome work on the bike bud and loved the Bible verse at the end.

[@CJMediaOfficial]

Thank you sir! Cheers

[@shaaaafi]

You don’t want to overtighten the throttle. You can tighten to remove the slack but turn the handlebars to its extreme ends and test the throttle. If the throttle rolls back, you’re good. However, if the throttle stays, then it’s too tight. You don’t want your bike to rev by itself and you have no control when taking corners. Sometimes the RPM with increase when you turn your handlebar at the ends even when you’re idling. If this happens, loosen the slack until it goes away. Please test the throttle with the handlebars turned at both ends. For your safety brother.

[@crazy1pi]

Nice to see you making progress

[@bryansuperduke1290r]

I wouldn’t replace the original bullet connectors with an aftermarket connector and 2 shoulder joints, you now have 3 joints to the wire when there was only 1 b4. Has potential to cause more problems.

[@AbdulKareem-zj7cf]

cant wait to see the next build😭😭😭😭😭😭

[@bdcityrider]

Waiting for your vedios for days bro . Keep up the good work bro .

[@pavithramadubashiya2536]

Absolutely Brilliant😍❤️

[@elysiolesgik6525]

!!! at 10:40 , I have the impression of seeing the blue rags in the air intakes of the engine (hi from France 😅 )

[@lizawatiabangmonir3554]

Finally...ducati

[@royalrahul284]

Big of India 💝💯

[@damirvilenica571]

I learn now how to adjust throtle on My Aprilia,olso ride by wire,tnx bro😜🍻👍👍

[@CJMediaOfficial]

awesome bro ! You and me both

[@NUMAAN.OFFICIAL]

Love from Kashmir bro

[@jeyseychelles1370]

I still remember how to set the timing like thae way you showed 🤦‍♂️ Tip. Ive seen people on KZbin using the ceramic coating on the plastic it protects it and makes it look nice. And this is a cable throttle and its not throttle by wire, throttle by refers to your throttle system using electrical wires ( what u were calling electric throttle) and since the original ones were cable before we just call them throttle and we call the new technology throttle by wire (what u called electronic throttle)

[@tanmoy1342]

CJ is banging KZbin through his videos by videos.. keep it up brothaaa.Waiting for the new one😁❤️

[@johnsumwinter5573]

Where is the aprilia RSV4 ???? that's a nice bike .

[@luciandickens2418]

LOvin this vid the mostest 😂 Greetings from South Africa 🇿🇦

[@josericardonovais8768]

Muito bacana ver a transformação....belo trabalho

[@bridgettdixon6807]

Hi CJ, got my popcorn ready!!

[@CJMediaOfficial]

Hahaha 🤣 save me some!! 🍿🍿

[@DuniaHanyaSementara]

Malaysia 🇲🇾✅

[@123mus]

Cj wellcom back brother❤❤❤❤

[@stefandicitrajaya9746]

here in indonesia "throttle by wire" means its electronic throttle. convensional throttle by "wire" is called something else that till now idk what it is

[@adrianoleao9127]

Fala cabelo de ferruge essa ducat é ruin de encontrar aqui no Brasil em bom estado de conservação!

[@franklinwilkerson2061]

The best part is all these bikes come with a 20 second/20 ft warranty!

[@Sanket9171]

Amazing bro 😎👍🏻

[@ismaelacevedo1633]

Amen

[@gokulraj2909]

U R 1 man army bro 🎉 big fan bro

[@ButteredToast_93]

Drive by wire actually means electronically controlled. Drive by cable would be what you’re referring to here 😊

[@YemloulBrahim-je8eh]

Nayese ❤

[@railfans_kai]

I wish i have skill like yours 😬

[@rickstokes2768]

Great video

[@848evo4]

EVO engine has different cams and higher compression

[@HrdStL11]

Thats the tiniest ECU ever. The connectors are as big as the ecu itself.

[@areppiji6483]

Any update on rsv4? Man its been a long time since we got any

[@jaalenja4]

man, change main baterry cables straight a way for upgraded ones to avoid starting isues

[@streetlegalbuilds7644]

👍 good job

[@BrUnfiltered]

Please change the clutch lever and break lever also ❤

[@mrbalramhackershort2004]

Very nice 🙂

[@kunaalvlogzgamingstreams2074]

What is the blue thing you use to clean bikes and keep it to cover throttle body???

[@christopherjohnson6056]

Keep the two cans , Ducati has always been a two exhaust bike .

[@13maret99]

dream bike

[@manitoy269]

Δόξα και τιμή στον Santiago😂😂😂

[@sa9840]

I don't like how is ending this part 🙄😁, i can't wait for next one

[@CJMediaOfficial]

im sorry to leave you on the edge lol, soon to come friend!

[@mauricebramao5592]

Hi, where do you purchase the automotive connectors and the solder sticks from? We here in Barbados have limited access to those kinds of goodies. Amazon maybe?

[@CJMediaOfficial]

yes amazon! Greetings to you!

[@insanestalker94]

Interesting content man, great in fact. But i have one question, can you make a profit on a build like this?

[@Ziomek2141]

Hi :) Where do you work on a daily basis?? You're doing a good jon! Respect from Poland!! xD

[@KenzieBotha]

don't put the battery on the floor, it bends the cells put it on a table or put a rubber mat under it🙏beautiful bike

[@nagurammu9686]

Broo aprilla bike video post chey bro

[@quinceryeambat5056]

🤘

[@jered1940]

Nice

[@mraki1980]

What is the name of the foam cleaner? :-)

[@skatman3872]

What happened to your 1199

[@jairotuban24]

nice cj

[@TFV-Motorcycles]

Its complicated bike😅 good job

[@CJMediaOfficial]

Thanks!

[@blackthunder2130]

Got a new bike to work on

[@toddstahley4256]

What belts are you using?

[@theriderdtm8650]

Total all the parts you buy???

[@VitalityPBOwner]

Throttle by cable

[@olannakprasitno.5312]

Next project Rebuilding Panigale V4

[@PietFriet-z2p]

Can anyone tell me what that foamy cleaner is he's using?

[@ji.gatcha]

that belt tension will get you balding before it gets right

[@CJMediaOfficial]

🤣🤣 I'm already growing grey hairs

[@jairotuban24]

nice