REBUILDING A WRECKED 2023 BMW M240I | PART 3 Can I Save The Engine?

[@BackYardBoyz]

Drop a like or your engine won’t start 😢

[@DRRebuild]

It will start I hope 🤞

[@richieeemosley1178]

Bro I been a sub for 2 years now and just want to say thanks for all the fire vids 💪🏾

[@lifewithjustin1686]

When is the next episode

[@mouadhoubane2958]

It’s because the door is open (safety)

[@wsgghad5679]

Yo, you left the passenger engine mounted loose bro please go check it out & tighten it 😢

[@antonyo7531]

This is the kind of video i can watch 100 percent of. Love that u are explaining qhats going on instead of just timelapses 👍

[@emil1997h]

Bro! Impressive amount of work done in one video! This makes me and I’m sure others very grateful that we were able to witness all this in one video rather than split into 5 different parts! This episode was super fun to watch Thank you for your hard work! 👊🏼

[@PLACESNONDESCRIPT]

A cable under the transmission tunnel needs to be pulled for it to go off the parking and get to neutral and can now have selected drive modes ,,new BMW are stress but fun at same time

[@TheHeartless917]

dude im new to this channel, yet the moment you fired up the car for the very 1st time, brings a smile to my face. Felt like watching you rebuild this thing is so worth it. keep it up! from PH!

[@DachsAutos]

Heck of a birthday present! that'll be a sweet ride when you're done!

[@thataveragedude5]

For the transmission fluid you can buy the ZF Lifeguard 8 fluid, it's identical to the BMW 8 speed fluid but much cheaper.

[@atallah24]

appreciate the videos and you taking us along the way.

[@hoodmechanic956]

great work as usual.. about the kicking u out of gear issue, just make sure all doors, hood, trunk are closed (maybe faulty sensors), or try swapping out the negative battery cable again (restraint errors) or double check if bmw started using pyro fuses since it is a new car. I had a similar issue on a bmw i rebuilt mine was a bad hood sensor

[@israrashraf902]

Just love your work and the effort you put in 👍

[@mifo1133]

that green fluid dripping from your old broken AC was AC oil, and need to put same amount of oil in your new AC..please check if that smoke was not running AC without oil .., perfect video you did a perfect job wish i can be so good at this as you..keep up good work and don't change video form its perfect now !

[@donny_roxx]

These Videos really motivate me ......... Love your content

[@TundeEszlari]

You are very good KZbinrs.❤

[@LuisUjueta]

incredible the work alone , really impresive

[@hamishcruden7623]

The time lapse you did was great! Great job doing all this work without removing the motor.

[@marioramirez6089]

My favorite KZbinr now . Always catch myself waiting for the next upload !

[@Edik12233445]

It’s to late now, but for the future remember whenever replacing engine components such as oil pan/ oil filter housing. Anything that like that you need to prime the oil prior to starting. Not doing so your taking a risk of harming the engine.

[@joka5684]

I was about to post this very thing. Excellent way to fry your bearings unless you prime the oil system.

[@o.gokhanersoy3255]

Hey Tim, I really appreciate your new concept of preparing the content.

[@asmahanumer]

Happy birthday 🎉 Tim! Keep up the grind man!💪🏻

[@testchannel8262]

I really love your car content and I can't wait for the BMW to drive

[@gezdipz5425]

Loving the way it's coming together,computer got to see correct values before it can move I'd imagine. Keep up the great content 👍🏻

[@grantmurray8059]

You deserve a pat on the back. So happy you were able to get the engine started, sounded insane!

[@davidcain2985]

make sure the bonnet latch and trunk latch is closed also if any doors are open it will not go into gear

[@BackYardBoyz]

I made sure everything was closed. No luck

[@dylanneman744]

I had the same issue, plug in the seatbelt and it should drive. Goodluck

[@knight2425]

Checking the old oil pan for forbidden glitter will tell you if there’s any bearing damage from running without oil but otherwise the engine should be ok

[@gman6861]

Brilliantl Tim 💥 Absolutely love your videos!! The way you explain everything is second to none. Keep em coming 👍🏻

[@loganyoung7038]

I just came across your video on Facebook this is dope bro.

[@juniorcuritibano]

Awesome build!!

[@DolfocarAli]

man I was so happy that it did start good luck solving the transmission problem I am waiting for that

[@darrylcrawford8301]

Great achievement....I know the feeling to fix what's broken...can't wait for the finished product

[@MikelOyengo]

Keep up the great work Tim! This is an incredibly involved project but we all know you can do it!

[@Amateuranimation1]

Lol ☝🏽🤣😂

[@timosik916]

Happy Birthday Tim!

[@BackYardBoyz]

Thank you!🎉

[@kleemanjad]

​@@BackYardBoyzhappy bday bro 🎉🎉🎉

[@uly-is-cute]

lovin the content on ur channel recently

[@eldoctorexxl]

Hello from Portugal 🇵🇹 i love you videos

[@walther89]

you can put gasket for oilpan thin layer outer corners sealent to have fixed and oil proof, ofc lasts longer :)

[@timlad123456]

You are so fortunate to not have to drop the subframe like on the e90 generation Beamers. Great job the b58tu is so new I am amazed you could get the parts in a timely manner. Your amazing like all Tim's in the world great content

[@genzarsteve4577]

I just love it when a built comes together

[@rorybutler2076]

Happy Bday 🥳 bro, keep up the good work it's really motivating 🙏🏼

[@wjeurs]

Loved the reaction when the engine started haha, your face 😅

[@DSM2009]

Hi, let me say I have watched you since the early days and man you are just awesome. The cars that you have fixed up from being undrivable to a finished car that runs perfectly. Love all your videos and how you explain things to a novice person like myself. Brilliant work, keep em coming as I'll be watching 👍🏾

[@filipwennergren2712]

Always great! Keep up the good work. Greetings from Sweden ❤️

[@kennethomale5604]

I had no doubt in my mind that you would get this car running. As for the transmission, I feel the car might need some code cleared before it engages the car's gears. Brilliant work, keep it going like butter (from my perspective at least; I know it's not been easy).👍🏾

[@paullambert6875]

Big guy. I am impressed. Great job. Awesome project car. All the best from scotland 😊

[@duffydon1741]

Now, this is the channel i know and damn… is it good!

[@sheldondowns2150]

Coming along great my friend! Proud of ya, your doing great.

[@bongaximba3806]

Yeah baby!!! That B58 engine coming alive😭🔥this will be a sick build!!!!

[@bugged120]

Seriously Tim, well done! You are the hardest working dude out there!!!!!

[@colmart1973]

That was mad Tim, huge work but worth it to hear it run, amazing skill as always!👍🇮🇪

[@mrlacox2844]

B58s r the bomb. Mechanics choice of BMW engine. Great job getting that ride fixed.

[@MrWillrock64]

Hey Tim love your content. The reason you were having so much trouble with the oil pan and motor mount is you were supposed to drop the subframe..lesson learned.

[@TheKAWATEAM]

Nice work !! I am a BMW mechanic and impressed with the work that you do ! If you replace the battery next time Connect a a charger and set it on Supply mode. This helps prevent peak current . What can possible damage some expensive electronics. And dont forget to register the battery in the system . Important for Some systems to work correctly. Thumbs up from the Netherlands 🇳🇱 👍🏼

[@danepetersen397]

I love your content, watching from South Africa, BMW is my favorite brand tho

[@Joyful_Experienc11]

Your reaction after the first Start 😅😅😅 Happiness. Looking forward to the next content. All best wishes for u to get this beast rolling 🎉

[@leonmoorenatureexperience]

Dude, I’m watching this video and I’m also very excited for you man. Congratulations so far. I’m really enjoying your videos.

[@pnijhof8028]

Saw mat Armstrong with the m5 build. After bleeding the brakes the rigth way. The m5 would go into gear.

[@justme1017]

this man has a good attitude. I was thrilled wen the engine started like I had been the one that had ordered and change all the parts myself hehe.

[@Exillin]

Keep up the good work!

[@gemo9561]

always nice to see you work man!!!

[@LedderGV]

Yo bro I love the videos keep it up man 🎉

[@BackYardBoyz]

Appreciate it 🙏

[@ethandelafontaine]

just a tip for cleaning off gaskets, don't use a metal razor. in the video you can see how the surface is scuffed up and had small scratches which could lead to leaks. use a plastic scraper and a lot of patience

[@Heisy0198]

Tim the GOAT of rebuilds. Super inspirational and always positive.

[@bmwgary]

Happy belated birthday Tim ✌ Nice grind on the M240i - so far so good on the B58 👍

[@snakeeyes7277]

Your finger oh lord what a warrior! You did a great job I enjoyed the video!!

[@bimmerflex5526]

Yes Tim. The king of England should knight you as Sir Tim. For bringing us the best content. Best built cars. This was phenomenal to watch. Engine sounds sweeeet. U.K. loving your awesome channel. More please. Asap. 🇬🇧

[@colognebock3105]

At the Moment for me the best car content on KZbin greetings from germany

[@gordonbradford4054]

Loved the look on your face when that engine fired up!❤

[@petetukiainen]

Not all superheroes wear capes. 🦸‍♀️ Tim you are a really big role model for all of us home garage repairers.🙏

[@maneycb9]

Great job broe. Can't wait till it's in the road driving and then to the body work..

[@jibranyar5977]

That coolant tip is genius, woulda save me all the mess from filling and draining coolant on a turbo project!

[@fred420]

Amazing work as always dude!

[@thememers_dude]

I think you need to reset the crash data of the car like the seatbelt if it locked

[@ProfTshabalala]

oh my god it started🙆🏾‍♂️ jeez I am so happy for you 😊 will stay tuned for the next EP #🇿🇦

[@jcrewcustomz]

Love these B58 Motors & also loved how ours also had 4k miles! Makes working on em so much more easier and actually fun! Great Work Tim!

[@michelgenuinosantosgenuino5016]

Keep going brother great content 🔥🔥

[@davidfrank2824]

I believe the reason the transmission is kicking you back to park is because of all the airbag codes in the computer. I believe that is design into the safety system of the car. If you are in an accident is that made the airbags deploy they don't want you to pass out with your foot on the accelerator. When the computer sensors went I believe in sent a code to the transmission and more than likely the engine. Since the engine able to run without the transmission working I believe that would be a different safety system. Since the car knows that there was an accident it's protecting you by keeping it in park. I really look forward to following you through this build. I most definitely hit the like button and subscribe.

[@kjphillips8057]

Car sounds so sick and I love that tan interior so much

[@zouhirkhalid2698]

Good job man we love it

[@brunomiguel9159]

it´s like the 1m, good work bro !! you are the man !!!

[@kacper9337]

it smokes from ac because you ran it w/o ac gas after changing ac condenser

[@lytenichabg]

I love this sound of engine and with for the next one and love you doing in any episode❤.

[@torstenhein2979]

Well done on also using solvent to clean. 👍

[@TheMadWalker.]

Hi Tim Congratulations On The Start Up.👍 Always Loved Your Work Ethnic's And Motivation . That's One Cool Beamer. Try To Stay Cool In The Sunshine State.🌞

[@sameoldmo]

binged watched all your recent vids waiting for this!!

[@Bobwa2008]

Dam you need a shop your running out of room. Loving your videos lately 👍🏻👍🏻

[@leonmoorenatureexperience]

Can’t wait to see the next videos of this car man.. I just checked back your channel for the new video 😊

[@crussyrangwani7938]

Your projects make me a happy person, i wish if I had a capital i would like to start these kinda of projects

[@ralphnice3268]

Happy birthday kid njoy and keep the videos going…. Like always great content 👍👍👍

[@badopsec]

happy birthday broooo🎉

[@vp2395]

The best content on youtube.

[@soccerbeasthd1188]

Happy birthday brotha!! This build will be sick.

[@borismkhwanazi583]

Salute South Africa is watching as always

[@michaelchung5881]

Once again the most satisfying and enjoyable video, congrats on the progress bro and as usual big anticipation on the next one cause will always be the best one 💯❤️💚💛💯

[@TJZTechShow]

Awesome car! I’m biased because I have a 2023 M240 as well, same color too. Hope you get it driving soon!

[@markooska]

When you started up the BMW, you reminded me of when I fixed my VW and had the oil pan also replaced with sealant and had the same reaction as you that it was all running smooth 😂 good stuff man.

[@adrianthorne9106]

What you take on is amazing considering conditions you work under, very watchable content 😳

[@fabiolucchesi6608]

Firstly, as always, this is an amazing video Tim! Secondly I want to wish you “Happy birthday and I hope that for your 25th birthday you had a wonderful day. Take care of yourself!

[@mennoboon8037]

Congrats thats the best sound

[@NocturnalRixx]

Epic my bro! Really enjoying this build ✌🏻

[@stouph69]

Love watchin your vids. Keep on goin. This 1 will be pretty sic

[@Jayc_e93]

😂my face looked just like yours when that thing fired up healthy!!! Curious to see how it turns out mighta been a gem!!

[@skybeat6931]

Amazing congratulations 🥳 🎉