Rebuilding A Wrecked Jeep Rubicon Part 9

[@vineethg982]

A thumbs up for the kid....sure helps for promoting goonzquad....

[@williambrouwers5664]

Nice touch adding your sister to the video👍 Keep up the good work

[@mxak240]

my favorite smaller channel on youtube atm

[@FloridaBoilermaker]

Look at them now, the leader in this area. Other channels copping them.

[@hkm_865]

Quickly becoming one of my favorite channels! stick with the rebuilding vids. And your junkyard is awesome I wish I had one like that near me...

[@supercharged00gtp]

While that engine is out consider changing the rear main seal that is likely where the oil was coming form hitting the clutch. Also, an oil pump would be good while everything is easily accessible. Keep up the great work fellas.

[@mattg6262]

I like your cardboard box template for the bolts. Simple but awesome

[@stevenhornerraffaele6070]

Love what you do. Keep up the good work. You guys are awesome.

[@ccnixon]

You are one hell of a team.. Keep up the fine work!

[@phillipsole8314]

You guys are doing a great job. Every time I do a motor up I always get the bolts Zinc coated and it looks sweet az.

[@jasonswift7098]

You guys are awesome!

[@BZeusgarage]

These guys are killing it

[@FightingFishTv]

you guys are fuckin awesome

[@ethansiems3818]

Exactly what I was thinking

[@astonbritto6150]

Thank you guys for making such great videos

[@KhaledAli-dk3zc]

God bless the little girl❤

[@MetaView7]

Good work guys. You shouldn't use the white teflon. Get the blue one that is fuel safe. It will not rot by petrochemicals.

[@fords4life914]

YOU GUYS DO AWSOME WORK!!!!

[@208miuwu]

You may wanna get some exhaust wrap from DEI order it from Summit or Autozone may have it give that Header Pipe a good wrap. Sits close to the Intake it will be heating up your fuel may effect your performance a bit.

[@captnxcrunch]

You should do the rear main seal while you have it apart. My 03 TJ leaked from there and I had though it was the oil pan.

[@bubberrand]

Tommy Ashworth - I come from the future to tell you that they did just that.

[@doctorqwerty5753]

man, it must feel so good after you finish a build knowing you worked so hard for it.

[@nathanbrinker1149]

Good job guys keep up the hard work would like to see rhe black jeep Alsp snag those rims

[@chadharmon5716]

The inside of that valve train looks great very clean

[@joeprivate2687]

Great junkyard, nothing like that here. Great work guys, keep it up.

[@jackboynton7905]

Damn these videos are perfect, I get so excited when I see another video pop up. Keep it up!

[@samperrino5122]

Keep up the amazing content! I love that your vids are short but full of information.

[@226devin]

Awesome video as always

[@osamaelhawat2766]

Nice 👍 and clean and clear work ,,, keep going guys

[@CoMoEnTrAsAlE]

loving the daily vids!! keep it up guys

[@timify10]

See if you need to replace the Harmonic Balancer. BTW, a really good paint for the frame and other parts is Chassis Saver.

[@alexpodolsky3245]

Thanks again great little vid perfect time

[@vinayakbiju]

Goonzquad + Samcracc makes my KZbin awesome 😍

[@marlerusticgeek0075]

Progressing nicely guys🔧👍🏾

[@MrBlackmaxDK]

You got a subscriber from Denmark :) keep up the good work

[@legoMan104]

SINCE YOU HAVE THE OIL PAN OFF, ITS A PERFECT TIME TO REPLACE THE REAR MAIN SEAL! Please please do this!!! perfect time $5 part

[@CollinDudley113]

You guys should keep the wheels but get bigger tires on the newer rubicon! Btw love the content!

[@matthewtlc1253]

you should show how to install the clutch. I'm about to install one in my TJ next week.

[@goonzquad]

MatthewTLC I definitely will!

[@christiansander6463]

Make sure you change out that rear main seal while you have that motor out and the oil pan off! Inspect that oil pump as well.. Looking good though guys keep on wrenching 💪

[@davidpippin3460]

SINCE YOU HAVE THE OIL PAN OFF, ITS A PERFECT TIME TO REPLACE THE REAR MAIN SEAL! IM YELLING BECAUSE I AM OLD! LOL

[@shortslamn]

David Pippin I second that. If it’s not leaking now, it will.

[@davidpippin3460]

Yep, much harder to do while in the Jeep. Not too difficult, just this is the perfect opportunity to do so. I would swap out the oil pump too.

[@HP.Customs]

You are correct old man,lol.

[@goonzquad]

Will do that tmrw for sure! Thanks guys

[@chadharmon5716]

goonzquad oil pump is cheap insurance

[@hizixyt1780]

Loving the vids!!! Keep it up guys

[@coryscott8955]

Hope the new gasket works! On my YJ we replaced the gasket 2 times and it still leaked. It ended up being the pan was a little bent from god knows what! best of luck.

[@jeremynichols1326]

Another great video guys keep em comin

[@cleetismcdougall5425]

You guys should get one of those parts washers. Eastwood, Jegs, and Harbor freight carry them pretty cheap and saves a lot of time.

[@michaelshansen7070]

Expensive but those dry ice blasters are the best. Hours and hours and can be used on motors, body, tires and rims. Check it out!

[@newyorksfinest6183]

You should have painted the bolts

[@KeiNovak]

watching this for the first time a year later. amazing stuff.

[@danielfoster7899]

Lol that engine is painted just like the 4.2 me and my brother just rebuilt. If I were you I would go ahead and replace the oil pump since you have it all apart

[@MR87xj]

100% replace the rear main seal

[@StroppyPath]

Your Cat is the coolest.

[@greasemonkey441]

You guys should use rust conversion solution after cleaning the parts of rust then the correct primer for the metal type then paint as the rust will return under the fresh paint. I have had great results with Kurust don't know if you get it over there but I put it on all steel parts I have wire brushed it takes supposedly three hours to do its thing as it's a white liquid then it turns blue when it's put on rust then goes black once the reaction is finished but you must prime and paint it after or if it's a chassis I have just put black chassis waxoil straight over the top and my stuff is still in good condition.

[@OutJeeping]

You guys should have done the head gasket too. Also use primer when you are painting otherwise it will just flake off. Anyway good job.

[@mzmarquette]

OMG... I want her 7:44 !!!! Such a cutie :) 2nd time I've seen her. You guys are on a roll of gaining subscribers.... hope that speeds up with ppl helping with your GO FUND ME.... and PATREON goals (hint, hint) so you guys can continue posting these awesome videos!!!

[@goonzquad]

mzmarquette She’s all yours haha, yes the support will definitely help us out a lot and it motivates me to continue making these videos. Much more videos coming soon, thank you so much!!!

[@talezfromthedashcam3138]

You guys got your own Goonie, Just remember "GOONIES NEVER SAY DIE!"

[@phatcowboy76]

I enjoy watching your videos. You guys need a sandblaster for all the parts you sand and paint manually. Sandblaster would be much quicker.

[@fords4life914]

Get the rims!!!for the superduty...and the tip!!!

[@mburgnon]

You guys should do a mustang next

[@mzmarquette]

Yes, those rims 5:13 would look nice on the F-250. Did you inquire on the price before leaving?

[@pavelomar914]

U guys should’ve had a tone of subscribers

[@christianclark4488]

Love the videos keep it up

[@ItzCombo]

Nice vid

[@FloridaBoilermaker]

The first vid that is starting to look like the modern stuff on how you do your channel now.

[@robertboyer5498]

Love the channel! Have you thought about throwing some alumablast on that intake manifold? You painted up everything and now the intake looks dirty, lol!

[@klmckinnon]

Sound on the music is much better guys. Maybe even up a notch. Much better thanks.

[@austini2067]

@goonzquad make an original shirt that says "just throw some paint on it"

[@richardculbertson8027]

Really enjoying the content guys. Would be nice if you're videos were longer

[@nizzy1057]

keep it up brooooooooos!!!

[@Stormtrooper-iy5ld]

Biggest tip I take from rebuilding a jeep is to "throw a coat of paint" on everything hahaha nice job on the build so far tho

[@stephengeist9889]

You should do a video on how much everything cost on this Jeep

[@bstsms]

Did you change the oil pump while you had the pan off? Much easier to change with engine on a stand while out.

[@OPV17]

Love it

[@lucaslafontaine3446]

Jhjjjjjjjjnn b. Wkwhoktgttyyyyyyytgghhhcffggpphjjuippiiiiuhhygtgfftffv. N. O

[@landonzogleman450]

get those rims off that durmax

[@Buckeyebob]

Why did you not paint the bolts??

[@buchtmann1]

Great work, I'd have gotten new freeze plugs just cause how cheap they are. after painting it, the new freeze plugs just look good installed . Just a suggestion when you take down an engine to its long block bare. Love your work. in the white rubicon build, how much did you pay for the frame puller work? was that free?

[@RocHopn]

Hey guys don't use Teflon tape for that metal pipe that comes from the water pump up towards the valve cover. Use thread sealer. You can get our any auto parts store. It's white. Mark my words, coolant will leak with the thread tape.

[@djkingjeff5958]

are you best guys

[@andrewpetty9079]

Yay

[@johnpadilla480]

Couple of questions. 1. Did you paint over some sort of sensor plug on the block in red? 2. Did you check the compression in all of the cylinders? great videos! Finally 3. what about replacing the freeze plugs while are there?

[@vitalydrevenchuk3467]

John Padilla Too many damn questions

[@johnpadilla480]

Don't be so jealous of my ability to ask questions!!! LOL!

[@raymundo7687]

Did all do a compression check

[@starrintnl]

Why aren't you guys upgrading some of the cheaper easier components since you have her out and open? Like some new higher performance springs that will take a flash/sportier timing a bit nicer etc. Or a port and polish, heavier injectors, more open intake, etc? Just wondering as the usual hardest issues is getting around it or having to pull her guys out to do a particular upgrade. Anything cheap to get some small gains and also further prevent an issue down the line with some new shiny cylinders and such. Keep up the videos, you guys are doing great and I have to say I love watching. Channel is growing quite a bit and we're cheering you on.

[@starrintnl]

Also, hopefully you got a more protected and armored oil pan.

[@goonzquad]

Yea we still have a lot to learn about this engine, but we will try to upgrade as much as we can. Thanks for all of the advice and pointers, it’s going to lead us in the right direction.

[@starrintnl]

goonzquad Well, you guys are certainly on the right track! Thanks again for the great content!

[@youmadethereboresph]

Yo what’s the song name?

[@Jerms995]

#savethehair that's right

[@stevejohnson7660]

I hope you replaced the rear main seal and the transmission shaft seal

[@minimillones2112]

Paint the bolts it would look much better

[@rcdudes123]

Badass vids! Do you guys go to school? lol

[@josh26050]

I agree I would have done the rear main why you had the chance....and also just because of OCD...lol...I would have tossed a coat of paint on the bolt head for the valve head cover. The nice shiny cover and rusty bolts 🤢

[@Kncklhed]

FYI, the dirtymax wheels wont fit the F-250. Ford uses a metric bolt pattern. Chevy and Dodge will interchange, along with Ford if the ford is 99 or older. 2000 and up Ford is 8x170mm. Another thing, whatever you spent on the oil pan was wasted $. Wire wheel it, rust convert it, paint it, put it back on.

[@jawgernaut01]

What are your thoughts on harbor freight tools

[@LDMco]

Quinn Browne theyre good to get the job done quick, but they dont last for a long time as a craftsman would.

[@alexpodolsky3245]

I agree with the other guy literally one time use just for emergency just get Craftsman on sale lifetime warranty and fairly cheap

[@LDMco]

Alex Podolsky exactly. Good to get the job done quick and cheap, but not good to do the job repeatedly. Invest in better tools if you plan on using them more regularly or more harshly.

[@alexpodolsky3245]

LDM yes and Craftsman is great tool because they are evenly priced and great sales if they do break just pick up the pieces and take em back and you get a brand new one

[@sssigsauer2266]

LOL ,You both sound like SEARS ad, But it's true all the same.

[@donaldhayes6086]

Oil catch can and you won't oil build up in the intake .

[@lukesalmondrone2433]

Time for a 9 minute shit break

[@jeremyczanstke5]

Luke Salmon/Drone yup same here

[@val9499]

that little girl is so funny

[@benburrows1834]

Yippie

[@daltonwenner0127]

got a question for you boys did u guys go to school for a car mechanic or do u just wing it

[@Poseidon-f5q]

красавцы. привет с Украины.

[@fatguyfrommars]

I have a Ford Mustang GTO that is wrecked that I bought ages ago and I’m wondering if you want it but the only problem is it’s in England

[@israfilnobody7388]

I am really wondering! ! Since you sriped off that engine tottally .. beautiful awesome work .. butttt how the hell you skipped the most important and such golden chance to change the " SYLINDERS HEAD'S GASKET " !? .. was there a reason !?

[@michaellara2373]

all that painting and cleaning and you didn't paint the intake manifold? c'mon it'll look much better. some VHT primer and VHT cast/flat silver.

[@brandonthomas3690]

I would rec doing head gasket

[@mincraftpe2951]

8:42 you really look tired Simon

[@1agajee]

Hi there i love this Barbie doll beauty love him

[@Az-hq3qt]

no dint bot these wheels

[@jasonswift7098]

The engine at the start is not the V6 petrol out of the Rubicon? it looks like a straight 6? also you made the valve cover nice and shiny with new paint and then you put those old rusty bolts back in sort of does not look as nice. Can I suggest a ultra-sonic parts cleaning machine like you can put bolts and screws in it and it heats the water inside the container and it loosens all the dirt and rust of bolts and stuff. www.ebay.com.au/i/142473096355?chn=ps

[@DallasD_]

Guys check out this wet-blasting for rust-removal, bring sh!t to like-new appearance, no rust at all, use it after the needle-scaler for the heavy rust - kzbin.info?search_query=wet+blasting+attachment+

[@michaelnnielsen7508]

you to can fix al cars