REBUILDING A WRECKED MERCEDES E63 AMG-S | Part 5 I GOT LUCKY!

[@BackYardBoyz]

Shoutout EA Customs! Shoutout solderstick! Shoutout BYB fans! Love Yall! Get Solderstick at 20% OFF with discount code "BYB20" at www.solderstick.com/sale.

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@BackYardBoyz]

Shoutout EA Customs! Shoutout solderstick! Shoutout BYB fans! Love Yall! Get Solderstick at 20% OFF with discount code "BYB20" at www.solderstick.com/sale.

[@Rasigarage]

This kid has amazing talent and work ethic is unmatched keep up the good work

[@BackYardBoyz]

Thank you!

[@Rasigarage]

@@BackYardBoyz no thank you for keeping ur channel entertaining and finishing the projects u started keep up the good work

[@domchapp]

Completely agree. Top work Tim

[@jozsefovari1658]

​@@BackYardBoyz😮😮😮😮

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@nellybox9501]

It’s funny how I watch this video from beginning to the end without skipping…. This kid is amazing asf…….. I’m definitely doing this in my garage

[@BackYardBoyz]

I appreciate that

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@pappdavidrobert2273]

Finally some Mercedes content ❤ I was waiting for this so bad

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@mr6three]

Solderless connectors similar to solderstick have been around for at least 30 years. I repaired military airplanes and used them back in the 90s. I'm glad you showed them, I've needed some more. Nice to have another resource for them. Keep up the awesome content, Tim!

[@philtucker1224]

After fifty years ( U.K. based) I’ve never seen them before last year when this make has begun to be marketed commercially. They are certainly going to make these jobs a lot easier!

[@kyleduke7547]

Also if you purchase straight from the supplier they're a 1/4 of the price of solderstick

[@Berti_00]

My boy out here a one stop shop. Killer work broski 💪

[@BackYardBoyz]

One man army 💪🏼

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@martinjensen257]

Super cool to see how you repair a damaged car, and cool that you never cut corners.

[@autodallee4527]

Don't forget to protect any glass from grinding sparks. The drop glass in the door wasn't covered by paper. Very methodical work.

[@five6viiate]

honestly. your work is top tier. the way you’re willing to do what others wouldn’t touch and doing it like it’s light work goes to show your skills and talent. some of the work you’ve done on this car (and nearly all of the vehicles you have is incredible.

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@warpspeedracer]

That's interesting about the cavity wax. As long it is protected. Nice to see you work your magic to perfection.

[@playtext]

YOU'RE SO PATIENT WITH YOUR PROJECTS.💯

[@kjphillips8057]

I can watch your videos all day long I love it can’t wait to see this beast painted

[@ameetnarayan9219]

I have been using those solder sleeves (splice) as an aircraft engineer for over 20 years, good to see it trickle down to the automotive industry. Also, awesome work staggering those solder splices. Raychem TE connectivity has a huge range.

[@egiboj9001]

Brother, an advise to you. When bending the top of the door. roll down the window so its easier to bend it. The window makes the top door stronger when its up.

[@kingkamz8893]

Shoutout from South Africa..you have our Respect!!

[@Shamkar_15]

Best car guy i have ever watch❤❤❤❤❤❤❤❤

[@Simuxsslt2]

Mat Armstrong watch and you'll see better 👌

[@NathonDrake]

You defenitelly, returned with interesting videos and content, after your pause. So watching and follwing with a lot of attention for next vidoes not just for this project, but for all the rest of the builds.

[@trevonrogers787]

Tim doesn't play with gaps at all,love the work bro

[@Exillin]

Love seeing the gap king at work!, 👌🏽 amazing job!

[@el_krabinho]

I cant wait to see the m240i done

[@BackYardBoyz]

Hope I can finish it 😬

[@el_krabinho]

@@BackYardBoyz I believe in you bro, you got it

[@Jacobkushnir]

“Like nothing ever happened” real ones know where that quotes from😂

[@Juniors_bodyshop]

Gotta love these videos

[@jadynsyu9506]

Tim is trying to start a fire with that amount of cavity wax😂

[@BackYardBoyz]

No messing around here 😂

[@fireworkfreak9649]

Why don’t u use weld threw primer ?

[@kq6986]

Just pure quality in this… content is 💯

[@CKMCardesign]

LOVE to be a PART of this project!! I have parts,styling,steering wheels, bodykits and the knowlage…Not that you ever answer here though..😊

[@timthayer4140]

Can’t wait to see this thing all done!

[@pepifinta]

Love to watch your work bro , Respect !

[@Pilootto]

Loving the Meecedes content ❤

[@tunizieca9373]

Good job Tim, but why EA customs rejected this repair? It shouldn’t be that hard for them to repair the E63 🤨

[@BackYardBoyz]

It’s not EA customs that rejected it. It’s the insurance that rejected it because it didn’t make sense financially

[@2exiw]

Use a mini torch on the solder sticks. Works amazing and way faster.

[@Robin-kg1yv]

Special guest? in Florida? wrench every day? you are the warranty? hmm... that would definitely boost this channel if it is

[@kushalmaulloo762]

I love the attention you give to every small details and also the fact that you make everything look so easy..😛

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@elisviridov]

I like those solder things but I did run into issues before where the solder would not bond to the wires and I would have a lose connection sometimes

[@BackYardBoyz]

Need to properly heat it up and they melt solid!

[@colmart1973]

Love your skill and attention to detail Tim, will be amazing when done!👍🇮🇪

[@Abril-km7vo]

In the name of Allah, I invite you to worship Allah alone, so say: I bear witness that there is no god but Allah and I bear witness that Muhammad the Messenger of Allah. This is how I entered Islam. Read about our Prophet Muhammad, may Allah bless him and grant him peace, whom Allah sent as a mercy to the worlds, to keep us away from Hell and admit us to Paradise by following him, Allah willing, for he is one of Allah prophets at the end of time. .. .. And the Seal of the Prophets and Messengers ... ..............

[@sharkpuptrex]

I enjoy your video's from Florida so much more. I'm not sure why. Great job!!!

[@OomLuu]

The next one is the best one 🤜🤛😉

[@lindisokhuthu9790]

Bro I love your content, your consistency.

[@aspiazu]

Are you gonna be Samcrac's neighbour, now? Excelent video, man! Keep up the good work!

[@philtucker1224]

Nightmare scenario ha ha!

[@Lee2134]

The step-mom wont be happy 😉

[@danielburgin1060]

I would go as far to say one of the most talented on KZbin if not the most

[@braddersj3511]

I'm seriously jealous of your skill and determination for attention to detail in your work! Not to mention the content, structure and quality of these videos is spot on for you to be doing on your ones 👌 Keep it up

[@spartansoja2200]

Nice job done

[@BrianWalker-w7o]

great job Tim. You're a good welder. Well done.

[@caljucotcas]

nice work!

[@grzegorzlyduch71]

You should first apply primer and some putty + filler and then apply wax to the profile. That is a proper way. Or You should paint the elements completly and then apply wax, it would be the best solution. Best from Poland, it`s great to watch Your movies.

[@Therealrichdude]

Another great video, Tim

[@azharaboobaker9400]

Well Done bro! So so talented !! Love the videos 🎉

[@mennoboon8037]

Nice work and good vid for the weekend👍

[@markooska]

This is hard work! Keep it going man!!

[@flyingwithjay2353]

G'Morning Brother🙏

[@BackYardBoyz]

🖐

[@carlos7022]

@@BackYardBoyz❤

[@IamMoamen]

about time you get a break lmfao, good stuff TIM!!🔥🔥

[@briansfastss]

Dude, you’re doing a fantastic job on the E63. I’d love to see it all done and what the dealer would offer you?

[@SteelBlueBody]

Dope video Tim!

[@Frabert3692]

Dude all your builds are frickin awesome seriously keep up the great work 💪🏽💪🏽

[@Solar0227]

@BackYardBoyz Timma, try to put ground for welder closer to the spot you are trying to weld and it will help you to make better welds. I know can be hassle but just something I have learned from my father who welded a lot in USSR. I very much enjoy your content and am only one year younger than you. I am inspired by what you do and the man you are. Удачи тебе братуха! С богом!

[@scubaray32]

Man I was waiting on this video 📹 I knew you had the skills to get the job done ✔️

[@leehartley1667]

Brill job looks spot on

[@sttm1283]

i have seen you swap a few quarterpanels now, but i never seen you do like the famous lithuainian dude arthur tussik, where he melts metal(led, tin, aluminium, not sure what it is though) in the spliced panels(where the panel meets the original body) and then grind off the excess material.... damn taking no risks at all.... the whole bottle of cavity wax :D

[@KhaiMahase]

Awsome video. The newer the cars are the harder they are to work on lol. Keep up the great work. My current project is the 69' convertible camaro.

[@GPP1.8T20v]

They must sell that soldering kit to South Africa it will sell here big time

[@davisdesigns1153]

Was about to start looking online 😂

[@Marbella.187]

The E63 is a sick car 🎉🎉

[@johnroach873]

Mega work such a happy bloke fp only thing please cover ur glass up more .sparks rec ur glass

[@slavamusiienko9361]

Тима брат мой -ты лучший!!!👍

[@denalidriven1574]

Amazing by the book is his only way to approach a job phenomenal

[@austincau]

Awesome video!

[@TheKAWATEAM]

Nice work brottha 🎉

[@IsmailiaSix]

Talk about a perfectionist. 👍🏽👌🏽🤙🏽✌🏽

[@chilltify]

You move quiet often😁

[@BackYardBoyz]

It’s fun 😂💪🏼

[@calmdudethisisindonesian]

Yo buy the seat that goes to scrap 🔥🔥🔥 Send love from indonesian 🇮🇩

[@borismkhwanazi583]

Great work you South Africa is watching

[@fred420]

Great Video!

[@vancity2349]

Great updates

[@Goomba666]

Been watching your videos to help keep myself inspired on my own project. Old man gave me an 08 e550 with the forsaken p0017 engine code!

[@boyfrommars]

Хорошая работа👍🔥

[@darkangel22628]

Hey Tim, love you from Morocco, you are amazing

[@viorelluchak3709]

Great job bro 👍👍👍

[@TheOriginalDaveJ]

😂😂😂 it sounds like you were getting followed by a swarm of Bees.

[@Dinomite24]

Just found this channel. Enjoyed the episode and instantly subscribed. Keep it up brother.

[@eduardmihaiescu2143]

On the money❤❤❤

[@Dalbayob69]

Pick up some weld trough primer next time you’re in Home depot since you’re going the extra mile with the prep work 👍

[@vxracing380]

Definitely need to start using weld through primer

[@2exiw]

Most factors recommend a 50mm backer on outside body panels.

[@Hondacivic-e1f]

Great job, looks amazing👍

[@f.r4689]

Love from Portugal!!

[@italichi99munoz]

Great content, what do you do when you finish the cars?

[@2exiw]

I noticed the drivers don’t want to get the parts. I have also noticed with cara going to copart they give you a 3 day notice of the car being picked up so you just leave it outside and never know when it’s going to get out or if it was even picked up by the right person.

[@motoripzz3521]

Damnnn ya moving from Tampa?😭

[@HarshKumar-ry7jz]

Have you put internal structures under the quater pannel ?

[@BackYardBoyz]

Yes of course!

[@perfektindustries8952]

Next time roll the window down before trying to bend the top of the door..👍

[@BackYardBoyz]

I did that right after the video haha

[@dappy44]

Nice video 📹

[@JTica-e1f]

Again no zinc spray between the parts Rust will love it between the metal sheets 🤡🤌🏼

[@bimmerflex5526]

PHENOMENAL. 🇬🇧

[@steveosteen1815]

Tim what happened to the Lamborghini ? Buy the way nice work on the cars .

[@ianvader4697]

cavity wax gets done last, seam seal and prime your work properly

[@Avtomorgaautobuild]

the pillar bump is because iths shasy is twisted mate

[@asmirh8391]

Good job. I think you didn't weld under the "three metal part" at least not in the video

[@joshehman3571]

Dang dude

[@briansfastss]

What color are you going to paint the E63?

[@damnitdanielson]

In the video you said you were moving, still staying in Florida ?

[@BackYardBoyz]

Yessir just different city

[@sawomirplaga4697]

super robota