Rebuilding Starter And Alternator/ Fabbing A Battery Box/ New Tools!

[@Batang_72]

I love this episode, very helpful Sir . Excellent work…watching from Paris

[@SamPilgram]

📩📩congratulations you're shortlisted among the winners today use the what'sapp number above to DM ✍✍👆👆

[@That_Ryan_Guy]

Rebuilding instead of replacing where possible is awesome sauce dude!

[@waynesmith3057]

Great look with the engine it’s going to be one beautiful engine bay love it great work

[@trubkir]

MagDrills are amazing. Just remember to keep sweeping the swarf away from work area and always wipe or blow the bottom of the magnet off every set up. That magnet attracts a lot of chips.

[@unclejesse88]

People might think an electric fan is better, until they realize you are powering it with a measly 40 amp alternator. All the efficiency benefits go out the window when your alternator is maxed out. All the parts look great this episode, my only beef is that you didn't take the time to make a new lower hole for the fan shroud.

[@JustinPaul1st]

Second you on the shroud issue 👍upgrade that alternator to a 60or 80 AMP Bosch from that ND Nippon Denso and then you won't have that concern about Ampage and efficiency ...We did that to our 88 Cressida years ago and no issues☝☝☝

[@bsfunk44]

All the shroud has to do is stay put...who cares

[@ericwright6672]

Nah use a 73 Malibu Chevy one wire Alternator,Toyota alternators r shit, 110 Amp, eliminate all the other shit that comes with it, electric fan, b done with it! Cost me $56 dollars for a hot rod chrome plated 73 Malibu alternator, looks great!

[@unclejesse88]

@@ericwright6672 it would probably be a good idea, if I remember correctly he installed an amp with the stereo. Shoot, the stereo and the giant distributor is probably 40 amps alone hahahah.

[@juancarlossabido5870]

Really dig the bronze and black! As always sick job!!!

[@donigor9549]

Austin, I would like to congratulate you for the amazing job. My friend, this is a piece of art. Toyota will call you to buy this engine and put it in a museum. Awesome, wizard!

[@robertjordan9075]

Very impressed with the work you are doing.👍🏽👍🏽👍🏽

[@ray5961]

Really nice work Austin. On those coolant return/supply lines for the heater core, you might look into using the ones from the 1989-1995 Toyota Pickup w/ 22RE. If you look at the videos on my channel, I show them in some of the videos. They are hard lines from Toyota which run under the header on the left side of the block as well as a line which run under the intake on the right side of the block. You might have to cut/weld them, but they might be a nice option to help avoid heat from the header damaging any rubber hoses. Anyway, really nice work; enjoying your build and the videos. Thank you for showing the tools you use as well - very helpful!

[@Pnwflyer1]

Amazing build quality and patience. Still waiting on a first gen Cummins restoration

[@HardscapePro]

I have been subscribed to your channel for about a year And I’m amazed of what you can do And how much detail and effort you put on Definitely you Make things look easy to do

[@austin7smith3]

Honestly I've been subscribed for a few years and fully believe if he had every tool he needed could tear a rocket apart and reassemble it no issue

[@JoseANami]

Without a doubt that’s the most cool 22R engine Ever seen in my life. Congratulations.

[@tylersmith293]

Smart going with stock fan.

[@matthewtrudeau1197]

love your attention to detail. awesome work . awesome inspiration for my 1st gen 4runner 😎

[@maxospreys2964]

That is why I like this channel, he made make my buddies look bad because I'm too detail in doing my stuff now 😂😂😂

[@catfish573]

1-800-radiator. They have never let me down. Whatever you need they have it.

[@joesobaski1966]

Exelent work (as always) you deserve every good thing that comes your way.

[@adventurousairman]

Love your attention to details

[@billocampo1365]

Can't wait to see it finish and in the engine bay..

[@kip8790]

Looks awesome, I think the ‘Toyota’ on the cam cover needs to be in Red tho.

[@conservativeokie]

Dude! Great job on this engine! It really turned out amazing! 😁👍🏼

[@joshua6287]

Starter and alternator look sharp!

[@jaybats7865]

Dude, your skills are off the scale. Nice job on everything! That engine is SICK! Thanks for the fun

[@allenwilson9656]

" Circular saw " skill is a brand , we use evolution mag drills where I work. Schaweet metal fab work Austin

[@jsb1945]

I can’t wait to see that thing finished, and properly repainted!

[@allenwilson9656]

Said he wasn't gonna paint it, but I bet he will

[@christopherlmartin25]

Best dang 'Yota 22R motor I've ever seen....

[@vivalastatic]

I think I’ve missed a few episodes I need to go back and watch!! Loving the progress brotha 💪🏿💪🏿

[@อู่เนส-เรสซิ่ง]

I'm your fan from Thailand

[@austin7smith3]

Just had my 3rz completely rebuilt but its no where near this magnitude but you are my biggest inspiration and one day would love to do stuff like this to my keep up the amazing content 🔥 🙌

[@ivanperkes6006]

I bought the evolution table saw because of you.

[@austinniemela]

Awesome! How do you like it?

[@ivanperkes6006]

@@austinniemela it works great on everything. I ripped down some osb then ripped down some 1/16 th aluminum with the same blade. Your mini truck is looking amazing be the way.

[@DARKHORSE262]

Always an immediate thumbs up...👍

[@mdmn8160]

Your videos are awesome. Much love from Burundi 🇧🇮

[@4x4maximus]

awesome hack with sealed bearings. freeze them overnight. drop straight in with a light tap, then they expand into fit. do it all time with my bearings, makes your press dusty though lol

[@Metalwolf765]

Looks great!

[@jeffreymontalban8416]

I recommend a bessy clamp on the mag drill. If it ever walks, it’s very aggressive. I use these all the time

[@bmxtaz]

That is the cleanest custom 20/22r out there hands down. Well done it is video.

[@jimhunt5259]

Now all you need is a portaband saw on a stand. Makes making small part easy. now more angle grinder

[@kingrp3481]

Clean work amazing results, 👏

[@xispaki]

this is freaking insane! excellent attention to detail...great job Austin, keep it up!

[@austinniemela]

Thanks man!

[@arkanholland]

I love your work very nice job I wish I can do that carry on God bless you

[@Adam-rj4kg]

Looks perfect, so sick!

[@peterp4319]

outstanding work, I'm really enjoying these videos

[@swaggahboy3627]

Cant wait to see this running!

[@RC-jf6rj]

What is the green tape that you use to protect openings from sandblasting?

[@hookset4137]

Whiper arms from 90s yotas may work aswell if you want a double blade whper..they do on my 85

[@labanstutzman9372]

I use a mag drill quite a bit and it seems like my cutters last longer when I put more pressure on them and use cutting fluid it puts more the heat into the chips and less into the cutter therefore making the cutter last longer. And btw that engine is looking gorgeous!

[@austinniemela]

Good tips!! And thank you!

[@dezfan]

Looks like a damn art piece!😎

[@vettepicking]

I saw a builder cerakote plastic and it worked nice....never seen that before

[@ctech14367]

Looks good

[@theemekanix]

a work of art.

[@DaDudeFromLA]

Man this will have to be a 2022 pickup man it’s all new

[@Scaze74]

This is realy making me want to get started on my Celica GT -83

[@alobaidibaghdad]

Great engine

Loving what you are doing with this car 🥰🥰

[@chelseachestnut8557]

another satisfied follower here. see u on ur next vids.

[@bigmackstruckstop9213]

Looking good 👍

[@kristoffer-robinlotze7273]

Great looking engine! 😍

[@tomswindler64]

Great video,your talent just keeps coming thru.nice job on all the projects you took care of in this video.👍👍👍😎😎😎

[@MussaKZN]

Just bought a Milwaukee battery Mag drill for site work OMG how good can something get. Next I’ll get the battery welder for Fronius and I’ll throw wy extension leads away. PS man that motor looks sexy.

[@stevemorris7845]

Doin a great job on it brother I'm currently in search of a first gen 4x4 as a project for me and my son

[@purrpleunicorn]

looking awesome.......

[@moedalgarny]

respect man...the time that take...respect...clutch fan=more torq 😐👌

[@victorddamulira1926]

Sick!!

[@ShanesGettingHandy]

What solution do you use in your parts washer?

[@austinniemela]

Simple green hd!

[@blainemelairei7074]

Bro i think it might look cool and sound even more silent with an electric cooling fan never seen one 22RE with an electric fan

[@mikediamond257]

I’d really like to know your background. There’s nothing you haven’t done on this thing and looked like you didn’t know what you were doing. Very clever man

[@alanchatterton1978]

I am surprised that with all you skills and attention to detail that you did not relocate the radiator shroud mounting tabs.

[@glenngamboa9224]

Nice Battery Compartment can I buy same one u made from you? Info Please?

[@hz1234]

I spent a lot of years repairing these components and I didn't repaint them😂

[@DaDudeFromLA]

Doing egr delete?

[@charliebruceortega8447]

👍

[@jdk9769]

❤️

[@rickwatson7423]

I could've got you another battery tray for you off a 1991 Toyota pickup

[@leorowe1027]

The truck needs a nice paint job

[@mannyg2062]

sweeeettttt!!

[@mong1281]

متى ناوي تسقط المكينه يا كحيلان ؟

[@ewaschuk802]

Why not use yellow chromate hardware so they don’t rust so quick. 🤔

[@123hkopm123]

I can't get over those bottom bolts on the radiator shroud. 🤮

[@ОлександрТаран-ю4ь]

Доброго здоров'я привіт з Одеси Україна.

[@moubarak2097]

🤝😍

[@majorburns3680]

Yeah I agree it’s the best looking 22r motor that is until you bolt that disgusting looking HEI distributor from the last episode back on. God that thing is horrendous looking

[@johncourtneyscott2757]

That motor looks tit

[@thatomosifane9616]

I hope you don’t lift this van… it looks nice slammed