Rebuilding The 2019 VOLVO VNL Semi Truck CRAZY WRECKED | Cab Removal | PART 7 |

[@PApauloantonio]

I'm Brazilian. I like learn English and I like American Trucks. Than, I'm watching your videos and learning English with you. Thank you.

[@Rob...]

truck rebuilds are much better than car rebuilds!

[@waynestruckshorts]

Yep

[@tylerpassey3313]

Aw damn... wrong place

[@micheltemmink8861]

Can't wait for the next part best series on KZbin

[@wildcoyote34]

looking good, glad to hear that the frame is strait that's a huge relief cause usually when a truck flips they get a twist in the frame that's nearly impossible to remove ,, i'm looking forward to seeing it with a new cab i've been working on a rebuild of my own too ,although mine is much older and more simple ,, I just freshened the engine in my 1965 GMC 6500 truck tractor ,,new rings and bearings ,and a valve job the engine had just over 200,000 miles on it the engine is the largest gasoline engine ever placed in a highway truck ,, a very rare GMC 702 twin six V12 gasoline engine 11.5 liters of awesomeness ,and one of the sweetest sounding engines i have ever seen ,,even better when it's ran with Quadruple exhausts like mine is ,,this is made possible by the fact that the twin six actually has 4 heads 1 for each 3 cylinders

[@bryantford3054]

The yellow forks are bending. The cab weighs about a ton. Let me walk under it for a video clip. I probably would have done the same thing while my wife screamed in terror. 👍🏻

[@thereelangler2391]

More proof as to why women outlive men.

[@jimmydavis1151]

That poor man will see that accident in his mind the rest of his life and wonder if he could have done anything differently may his mind and his wife be at piece now in God's will

[@NikoBrothers]

great progress and frame is good to go

[@gastonmoreno8366]

Wow already part 7. Time flys by.

[@TheBiggadan]

You are definitely a one man operation..keep up the good work..

[@10feethighermaga12]

With those sandals...... you can accomplish anything, never give up hope!

[@sruk]

10 FEET HIGHER MAGA 😂 great comment made me laugh

[@jimzucker]

Keep up the good job Rusty! Greets from Berlin Germany

[@TheRealBKSchyster]

Hey Rusty! It's great seeing her top less!! I hope you do find yourself a cab and soon.... I mean a cab is sorta important, better than a milk crate for a seat and a Coleman cot for a sleeper... lol ...😂!!! And those "scuffs," well they tell the story of your lady's life, the scars of a rough beginning for her, and you will carry a torch of sorts for the former driver and only a few of us know the painful beginning and those scuffs are also a different reminder too!! Reminding you and everyone of the love of labor you have poured into her, to bring back the glory and majesty of the heart of an 18 wheeler!! ...... ANYWAY, KEEP ON KEEPING ON BROTHER!! PEACE 🤘

[@brianmeattey4151]

That is sweet bud straight and narrow nice and ya I am checking a lot of places up this way for a cab k and dont be scared about backing up between rigs bud practice at your home whith a odd rig ya have there and for night time pick up some led flood lights for backing up quick connects bud and your do it bud ..most peaple tend to over star and screws them up but just take your time and practice using your mirrors and ya cant lose bud k but dont be scared worst thing ya can be bud it will all fall in place k but great vid bud and be good and God bless bud

[@dhyde9207]

Good work young man. You will be a truck builder, not just a driver.

[@finncampeau4922]

Can’t wait till the next episode! Great job!!!

[@augustusshook2881]

You doing a great job. Be proud of what you are doing. Great work ethic you have there.

[@robertboyer5498]

You already have flip flops. You’re gonna do great in a Volvo! 😂

[@rossvinnitsky1927]

Robert Boyer 😂😂😂 typical volvo driver

[@alexhemi7]

It's florida what do u expect.

[@rossvinnitsky1927]

Alex G i lived two years in Orlando. Never was I wearing ff while working. DANGEROUS!!!

[@struedel25]

Funny! He puts his foot up and pushes on the swaybar with them. Just as inappropriate as driving with them. Oh well. I still like these videos.

[@AP_101]

Can't wait to see this truck on the road!

[@hekeleh8066]

Yes

[@sruk]

Another good video mate what an inspiration you are you inspired me to start my KZbin channel looking forward to seeing your next video i’ll keep working on the Ferrari

[@warrentavernia5136]

I am subscribed and will be watching all the rest of your vids on this rebuild in the future vids so Impress me with all the stuff you have learned accurately. It would be awesome to see at lease one young man that can describe all the different parts of a truck and how they work instead of just being a steering wheel holder and a wreck just waiting to happen.

[@organbuilder272]

The boy might not have all the right names for the parts, but he is being careful to replace all damaged items. This is a professional job. The result should be perfect.

[@wayneosgood3367]

Hi Rusty, front hubs have probably still got factory grease in them at that mileage , good for 100,000 before you have to touch them, measure length of old steering drag link with in a couple of millimetres centre to centre at tapers , just to centre steering , you will have more lock one side than other side , cheers Wayne New Zealand

[@avatarjo1]

Starting to look great. Keep up the hard work. Thanks for sharing.

[@harryireland1935]

Finally, the cab has been TOOKEN OFF !!! Yay! Best of luck with finding a cab, dude..

[@warrentavernia5136]

Learn to spell

[@harryireland1935]

@@warrentavernia5136 Calm down, patronizing GrammarNazi...it's an inside joke Rusty made in previous vids.

[@southernlonewolf798]

It's a diamond in the rough. Just got to keep polishing it to make it shine

[@sruk]

southern Lone Wolf 😂👍

[@rafizihazim9675]

Its okay rusty,just take your time to build the volvo,I always wait for the next part.Keep it up man

[@combatmedic3347]

High compliment from myself...Rusty is "The Real Deal" I wish he was my neighbor, just so I could hang out with this guy!

[@TheRustyCracker]

Combat Medic lol thanks man

[@alexandermaldonado1329]

The frame looks awesome you're doing a good job with the Volvo....

[@patryk2497]

Truck is definitely coming along bro I got faith in ya !!

[@shartne]

I knew it could be fixed never had disbelief about that. The main frame is good and the motor and transmission are good so the basic stuff to build on is OK no reason to not rebuild it. I was only guessing the frame rails were good but now that you lazered it we know they are great. I hope you find a cab soon.

[@jamestaylor5870]

Did you get the trailer with the trick

[@TheRustyCracker]

Taylor 151222 no I might be buying a dry van trailer soon.

[@jamestaylor5870]

@@TheRustyCracker can't wait to see if you do and good luck on all from Australia

[@JOSH-bx5wp]

way to go Man, you will get there. cheers!! THANKS FOR THE VIDEOS

[@Docmiller4425]

Great job, you have done a lot of work on it already. Good luck finding your cab.

[@mikeys1stphone191]

I never gave up on you my brother; knew you guy's could 👮💪💪💪💪💪👍👍👍👍👍👍👍👍👍👍

[@sruk]

your momma very inspiring aren’t they I watched then started my own channel 👍

[@sjohnson3405]

When your first video came across my suggestions i thought you were crazy and said you have parted it out but after watching i am happy for you good job keep up the good work

[@andrewwilson8317]

Good progress. Need to keep it covered up to keep all the crap out of getting into things. The wrecked cab still valuable,all the little bits,clips and trims so expensive if you have to buy from dealers. Waste nothing!

[@chazkay4999]

💯 10 per cent great vlog 👌👌 also great music 📣📣 yeh👍 can't wait for next one 🔥🔥

[@joshs6857]

Good work and there is a truck yard here in Knoxville Tennessee on Rutledge pke just google that if u need more info i will run there and get more info im only like a down the road fron it but the part tractors so i think you could have some luck with them but if not then they will give more people in this area because there are quiet a few

[@nathanhawkins946]

Place is called John story salvage

[@organbuilder272]

That is nice of you to offer to help Rusty. He has worked hard to do an excellent job of reconstruction.

[@toxic1venom]

The suspense is making it hard to wait

[@sruk]

Toxic Venom here here 👌

[@mikeys1stphone191]

And I'm still watching too!!!👮👍👍👍👍👍👍👍👍👍

[@bizkit81]

Brother I am glad to see a trucker doing this. Been trying to get goonzquad to rebuild that Volvo sitting in their yard and pimp it out.

[@EVER566]

Great video men, will be waiting for next one .

[@keithhelmer5806]

Great vid rusty cant wait till you get the cab and congrats on your trucking job keep up the good work

[@sruk]

Keith Helmer he only said a couple of weeks ago he was doing his truck test

[@keithhelmer5806]

In not always on the internet or KZbin so I'm just spreading positive vibes

[@sruk]

Keith Helmer would love to hear your thoughts on my build 👍

[@keithhelmer5806]

What's your channel i will go sub to it

[@sruk]

Cheers mate it’s salvage rebuilds uk

[@steveminch8223]

I say at least 4 ugadugs on the impact on the u bolts:-) thanks for the video can't wait till the next:-)

[@carrollreece8194]

Just a suggestion, on your swaybar mounting plates drill and install grease fittings to lube the bushings with some grease

[@davebrittain9216]

You were wondering if those U bolts were tight enough. Check the specs and torque them down to specs. Over tightening in some cases can be just as bad as too loose. At least with loose you can hear a tell tale sound but with over tight/stretched they just snap suddenly and you are in big trouble.

[@davebrittain9216]

What years of cabs fit?

[@TheRustyCracker]

Dave Brittain 2019-2020

[@delboytrotter8806]

Looking better dude.....sweeeeeeeet.

[@brandonberger4451]

Save the gauge cluster so it reflects accurate millage

[@charlesgine8207]

Have you checked the exhaust piping for oil leaks since the truck was upside down engine oil can be easily route through there I don't know just to make sure

[@TheRustyCracker]

charles gine yea some did get in. Will take apart and see later

[@charlesgine8207]

TheRustyCracker it was just a reminder cuz after removing the cab I see easy access to it before installing the new cab

[@charlesgine8207]

Nice job man am watching from Haiti 🇭🇹

[@gr7160]

Awesome thanks for the videos can't wait to see what's next and what other mysterious projects in the works great content thanks again god bless you.

[@demoscottgaminglounge6315]

When you get your CDL promise us you’ll make an series of your experience of the trucking industry in your complete Volvo VNL once it’s completed and done and rebuilt bc I’d like to see a series on that called the trucking adventures

[@xSnipingBeatz]

What type of jack is that

[@TheRustyCracker]

CisnerosView harbor fright

[@hanksmith6479]

Keep up the good work keep the videos coming we will watch it to the end can't wait

[@markvanderwel7182]

The frame is nice and straight. It might be hard to find a complete cab but what is wrong with an old vintage cabine giving an "old" truck a new engine and frame. I think it's a very cool project.

[@FormerArea51]

What is “Nipples” the magic word of the day? Lol! Great vid! Thanks👍

[@jamescaison7694]

They're zirk fittings

[@farmerbrown3768]

As James said they are grease “zerks” also, you replaced the “drag link” on the steering!

[@danielwebb9306]

Looking forward to the next video keep up the great job

[@haydenuk02]

Can’t wait for the next video keep up the great work thanks for the content

[@hamsflightskitbox3710]

Great job 👍🏾

[@farriswilliams2438]

Looking forward to the next video .. your truck is looking good

[@josephdeffendoll3056]

Put a cab over on it with dual stacks..... Maybe even a Peter built cab. Stretch the frame. More progress congratulations.

[@marquisgibbs9902]

That would be unique

[@muamer1919]

I have a question please please please who is ur (parts) friend where you got used parts please I live in jax fl as well thankssss

[@TheRustyCracker]

muamer1919 email me

[@JeremyGibson87]

I enjoy watching videos from some one local to me it a nice change

[@davekimbler2308]

That VNL cab might be hard to find ! Do you have a just in case plan like maybe going with a different style and year cab , like a 2010 - 2015 Volvo cab , or you waiting it out in hopes that soon you’ll get your VNL cab ? EVERYTHING IS FIXABLE ! SKOL BUD !

[@TheRustyCracker]

Dave Kimbler yea plan b is old style cab

[@davekimbler2308]

TheRustyCracker a place in Kansas City has Volvo cabs #855-464-5145 Vander Haags , give them a call

[@GearScar]

Em got to be the worst fork extensions I've ever seen! That's just dangerous! Awesome build tho!

[@717weston]

You can buy a lens repair kit for stemco Hub covers

[@sruk]

Erik Bob he just did

[@struedel25]

@@sruk He replaced the whole cover. That's not the same as replacing just the lens.

[@sruk]

I need help from you guys on my builds everyone is very nice and helpful no bad vibes in any of the comments

[@davidhorne2326]

How will you put new cab on? Don’t know if I would use your forklift setup. Thanks

[@TheRustyCracker]

David Horne forklift will be fine just have to buy better and longer extenders

[@Vigilant888]

Чудова робота 👍

[@ilbertonate1676]

Very nice 👍

[@olivaresgarage4586]

I think I might go buy a crashed semi truck and build it myself it seems so easy😂😂

[@sruk]

Jose Olivares I think he just makes it look easy

[@alessandrogomes789]

Little by little the volvo coming a live 👍

[@rondalsimonds6570]

Do a little custom work to it when she's done for eg a custom bumper and visor.

[@jamescovington9985]

Good stuff man keep up the good work

[@lonniedavis4462]

Sweet deal Rusty, I believe I also believe you a country boy working in flip flops lol keep up the great work also I like the intro great things do take time

[@81recinos]

Cool beans bro

[@wallacescott8424]

Were you able to find a cab yet

[@tamiyaniko8867]

Great 👍🏻i love prime movers... waiting for the next vid ❤️❤️

[@markcalvary6371]

Hope you find a cab for the Volvo!

[@cj5trackerat]

Awesome job man

[@ODAutomobiles]

You are great sir ✌️

[@Krause_transport_garage]

Daycab with a custom sleeper?

[@mikemike1602]

Great update

[@craigrtroxler7684]

Your doing a great job. I wanted to ask roughly how much do you save buying it and fixing it up vs just buying a used one in good condition? I love your fixing it up yourself, I was just wondering if something like this is worth it pocket wise or just for a good project

[@TheRustyCracker]

Craigr Troxler well new is 160k. Mine will cost me total hopefully 55k

[@yazanbaddawi9683]

As always great work rusty, if I may ask, how much do you think you'll be able to sell it for once it's finished?

[@TheRustyCracker]

Yazan Baddawi 100/ 110k

[@yazanbaddawi9683]

@@TheRustyCracker any plans to continue buying cars and flipping them?

[@TheRustyCracker]

Yazan Baddawi not sure yet

[@yazanbaddawi9683]

@@TheRustyCracker well good luck on your new venture bro. Dueces ✌️

[@mattfarahsmillionmilelexus]

I'd have thought that all semis would have converted to front disc brakes by now.

[@sruk]

Matt Farah's Million Mile Lexus I thought the same

[@markm0000]

Something is not right about this 2019 VNL there should have been all disc brakes. I know the Cascadia 2019 has all disc brakes.

[@struedel25]

They're optional.

[@andrewsmith-zi7db]

Hi you can fix anything with time great videos love the content keep up the great work

[@claudiotenciojimenez7898]

Cant wait to see the next video hahaha good job

[@corbettknowles9942]

Keep plugging along you'll get and great video

[@dan5979]

Love it man.

[@michaelkealoha976]

Good job step by step .

[@Topsiekku]

You dont use torque wrench, every bolt in same nm?

[@TruckBrainzProductionz]

progress yow keep it up ,,,,,,,,,,,,,,,,its coming along

[@bighaulin2246]

Old Volvo cab has left the chat🤣🤣✌🏼

[@jimmydeen58]

Great Video.. Looking Great..

[@netprox]

Hi, in the US do they still use drum brakes on a 2019 truck ?

[@niteriderevo9179]

on semis, for the most part, yes.. disc don't have the surface area to really stop the truck..

[@netprox]

@@niteriderevo9179 I drive a 2016 FH 460, cab over, they all come standard with disc brakes in all wheels and believe me ... it really stops

[@netprox]

@@niteriderevo9179 It is also necessary to consider that in my country the maximum weight we carry is 99,208 lbs or 45,000 kgs which makes the job of stopping a vehicle more difficult

[@niteriderevo9179]

​@@netprox most we can carry here is 80k lbs / 36287 kg.. have seen a few lighter duty setups with disc brakes up front.. suspect it's a cost thing here in the us, and guess my info was old, since i did some hunting over that..

[@safariman1222]

I believe you..its a lot of work 😁😁

[@biggdaddychevy]

Hey great job but did you think about maybe go buy a day cab and then send it off to a place where they build a sleeper birth on to it and even maybe have a stretched sleeper birth conversation added. Then maybe get you might get some good money for the truck . Good luck with it and can't wait for the next video.

[@nicocool7992]

as in my contry say: you have gold hands!!!)))

[@Emils2006]

I have never seen truck chassis like that, really interesting, basically you can put whatever you want on the top, its pretty flat. Make a giant wooden house on it!

[@warrentavernia5136]

DUMB ASS

[@DennisSulz]

The frame was my biggest concern. Glad it was OK since you repaired the whole front end and then finding a bent frame would have been disastrous.

[@eddiecouture1054]

What you email found a cab for 3700 eBay in Florida

[@TheRustyCracker]

Eddie Couture my email is in the about section. And cab has to be a 2019 / 2020 VNL 760

[@eddiecouture1054]

@@TheRustyCracker can't find it my email is [e-mail]

[@rahadianjamil9119]

great video ! keep your hard work ! 👍👍