REBUILDING THE CHEAPEST PORSCHE 718 CAYMAN S | PT1

Check if your car was damaged with Car Vertical - 10% off here 👉 www.carvertical.com/gb/landin...
I bought the cheapest Porsche 718 Cayman S in the whole entire county in hopes to rebuild it myself. But there's a few things we need to check before i jump into the rebuild project to make sure its actually worth the time as i have quickly found out that Porsche parts are not cheap!
⬇️ ALL MA MERCHANDISE ⬇️
matarmstrong.co.uk/
⬇️ Follow Me Here Aswell ⬇️
/ matarmstrongbmx
/ matarmstrongbmx

[@MatArmstrongbmx]

Check if your car was damaged with Car Vertical - 10% off here 👉 www.carvertical.com/gb/landing/britain?a=Matarmstrong&b=1e4c9523&voucher=Mat

[@kdmaj]

Hi Mat, just to let you know that i tried to use your discount code today on Car Vertical and it did not work when i came to pay. Hope that helps

[@zerocool0071]

@@kdmaj thats because he needs to buy another radiator..🤣🤣🤣

[@GenaF]

Have you previously bought any cars that you didn't get to fix up and so they were never seen on the channel? Maybe because you've realised it's structurally unsound or it's engine was screwed? Obviously with each one you buy you are taking a chance with not being able to view it before buying.

[@petec8736]

Mat can you please put links to all the companies you use for bodykits, alloys etc to save me going back through your videos to find their names. It would be massively appreciated by many I'm sure 👍👍👍

[@lsmith6378]

i enjoy this program BUT there is something annoying about this guy that gets under my skin. Don't think i would like to buy a car from this guy.

[@TheMoffBoy]

I actually don't think the damaged doors and bumper is from fork lift misuse. I think it's possible from lifting with straps from a ditch... Either that or it was strapped to a flat bed with ratchet straps...

[@HighTimesUTD]

That was my thoughts

[@sprograt]

Same here I was thinking it was lifting straps as well.

[@MadeInGefle]

Yes indeed looks like it

[@Doovde69]

Yep, that was my thoughts, looks to me with the wheel damage and dirt in the front end, it's most probably spun off a road (or a track) and probably landed in a ditch, and then been removed with straps around to lift it out, and the buckles have dug in to the sides.

[@darrenp2225]

Have to agree with you. My very thoughts as soon as I saw the marks.

[@tcp-ip2880]

I’ve purchased from CoPart, nearly every car has had damaged sill joints , dented chassis rails, damaged exhaust systems and cracked plastics underneath, I’ve seen more damage done by the loaders than in the accident, they really do need to address this issue.

[@R_RPerformance]

Doesn’t help when they throw them around with the forklifts tbf 🥱

[@GarageItYourself]

That's interesting as the USA YTers don't seem to spot this issue. Maybe cos they use those massive CAT loaders and not some tiny forklift?

[@statementleaver8095]

Address the Issue. So is this by Post or Email 🙊🙊

[@williamclay5615]

Copart do not care

[@bigal2417]

They don't give a fuxk cos by the time they load the car up for u, uve paid them. If it was me I'd load it myself however difficult it was.

[@OliverOzzy]

I like the way Mat is so chilled even when things aren't going as plan lol

[@jeangenie68]

He has a plan? 🤣🤣

[@Frostyyy__]

@@jeangenie68 there is never a plan 🤣

[@pggp273]

I think we all know that the money isn't in the car it's in the Utube views

[@chrisscott1402]

The costs are irrelevant because it'll be sold via a lottery for more than what was spent. Its basically a risk free job (assuming it can be fixed that is)

[@segsker]

I bet his speech was a bit more colourful in the uncut version! 😅

[@barrybigballs3010]

Them marks are from the straps they used to lift it out of a ditch it rolled over in .the pullys would’ve made the holes..can’t wait to see how your going to fix them pillars.

[@flyinyamaha]

Stacker rash. Blindingly obvious.

[@anthonydenn4345]

@@flyinyamaha Yeah, you can see the marks on the door panels don't go all the way up the panel. Like you would expect from straps.The fork lift shown in the video though, has 2 short rests at the back of the forks, which would line up perfectly with the door panel damage.

[@carlosdeno]

Smashing through the builds Mat, I love the fact that you’re keeping the faith on this build. Serious work on this one, good luck buddy! ✌️

[@johnallan9548]

The attention to detail on these videos Mat is second to none. The small things like the soundtrack and choice of music make the whole experience so enjoyable and polished. Keep it up 👍

[@MatArmstrongbmx]

Glad you like them!

[@n1s0]

Mad respect that you are actually showing your mistakes and explain them! This is the only way we people can learn from each other. People nowadays are afraid to show their mistakes because this will show the rest their weakness. I see power not weakness in that approach!

[@stuartballantine1662]

Always look forward to your videos as they are relatable, since watching your videos I’ve gotten the courage to swap bootlid, front bumper, headlights and fit aftermarket headlights on my 03 Passat estate as well as change a full cream interior including seatbelts to a black interior apart from the dash that’s next on the list

[@juliancarter4400]

Big respect Mat for taking this one on Mate! What a challenge! 🤯 looking forward to see how it pans out 🤘

[@leee3649]

Keep up the good work what you’ve achieved is amazing and how much you have learnt along the way has given me the motivation to take on a project I’ve just bought TOP MAN 👊🏼

[@MizanRahman-zc5wr]

Love what you’re doing Mat. You explain everything succinctly in your videos which keeps it interesting and entertaining. The best thing is how you encourage your audience with an “if I can do it, anyone can” attitude. Truly inspirational, keep going mate and all the best for the future.

[@lucashunter8763]

Another great video, Mat. Love the truthfulness of trial and error you go through. Although I’m sure it’s painful in the moment, it is extremely relatable for fellow spanner heads!

[@keezy077]

Just imagine how good the finished product would look

[@randombadgerfpv6558]

Taking the rough with the smooth fella. Love the optimism when things go wrong. Keep up the hard work as your channel is keeping me well entertained.

[@corrieedits7]

Honestly this man has skill and the time to fix v8 cars I wouldn’t even know where to start but mat your a inspiration to teach young people

[@halidaymichael2899]

Matt, you’re a good guy, so I take no pleasure - after assessing a few cars (many many cars), that Porsche is well beyond economic repair. Also, the A pillar damage is structural, you’ll need to replace the inner structure to make it safe. Best of luck.

[@ewanhollis7810]

Fantastic clip Matt - was waiting for this instalment as I’ve got a 718 Cayman so it’ll be as educational for me as much as yourself!! Can’t wait for pt3.

[@wingcommanderdaltonwalton67]

Brilliant!!! This will stay with both of you forever,what a great memory to have.

[@bauerjack1978]

Its just so satisfying taking a car apart and fixing stuff regardless the level of the project big or small, i think you like the car more and bond more then if you just having a car you do nothing with.

[@echtogammut]

As you were topping off the coolant, I was yelling at the screen. Modern Audis and Porsches both have pretty strict vacuum bleed and refill requirements. Also, be sure to carefully read the oil change process, it's very easy to overfill the oil and an oil extractor is worthwhile investment.

[@johnstonlee]

And bmw and Mercedes’ Matt should have known this by now.

[@indikabamunuarachchi8684]

Specially on a car where heat exhcanger is good 6 feet away from the engine pumping coolent using 2 inch pipes.

[@simulation8083]

Tbats why i live thsse vids...shows warrs an all. Learning alongthe way. Can you post your perfect no mistake vids. Jees. Give the guy a break

[@indikabamunuarachchi8684]

@@simulation8083 If you want to learn about porsches and fix them, first download the service manual and invest bit of money on an aftermarket PIWIS. There are true educational vids on youtube which not 100% on entertainment.

[@Armand79th]

Yeah, that was a rank amateur mistake.

[@michaelwheeler4854]

Love your attitude Mat. You never let setbacks get you down. Always positive.

[@NatalieRoush]

You've been absolutely killing it these last few months, you're giving me the inspiration I need to make more videos!

[@MatArmstrongbmx]

Thanks Natalie!! Yes we need more vids!

[@dangreasley7934]

Matt you are a legend mate. To have a go at this Porsche is beyond brave. I'm sure you can do it, so long as it's economically viable. I'm really looking forward to the next videos. Good luck fella :)

[@kenholmes8378]

Ken from North Carolina. USA. Became a fan watching you do the rebuild with Tavarish in Florida USA. Now I'm subscribed and going down the youtube rabbit hole trying to consume as many of your videos I can find. Love your work, and God bless Hannah... 😅

[@lindisokhuthu9790]

Mat you're so inspiring brodah, I look up to you,I cannot wait to do what you do, I love it. Blessings brodah.

[@zac3618]

Loving the videos Mat, have been watching since The Maserati rebuild and have been addicted since 👊🏻

[@engelguzman2182]

I love porsche please continue this build mat I’m sure it will come out amazing 🙌🏻

[@robinharrison3907]

Great video Mat 👍👍I love the way you see beyond the problem 👍👍Keep the videos coming ❤️❤️

[@philhornsby23]

Great video and mega that you always have a positive outlook on problems that arise, keep the great content coming 🤜🏻🤛🏻

[@dmariusg]

I have a feeling that Hannah will take it over once it`s done 😂😂

[@jerrygreene7139]

Who would want a Porsche when you have a Range Rover?

[@dmariusg]

@@jerrygreene7139 any normal person that loves cars?

[@JonathanFeast]

@@jerrygreene7139 Anyone who has an ounce of petrol in their veins........

[@AdamRDy4]

Found your channel about 2 or 3 months ago and watched from the s5 series. Finally caught up and on track and enjoying them 👌🏻

[@rockl085ter8]

I don't have a dip stick either but dash menu has an extra notice for oil level when engine is off (has to be off for 10+ mins first). Jag xf 2013 2 2d

[@Sacrifice-Paid]

Hey Mat, if ya read this comment, I work for Copart as a Hgv driver, I go collecting cars, vans, bikes, the damage done by the forklifts is unfortunate, cos the depot I work at, the forklifts have heavy duty crash pads fitted to them to stop that kind of damage happening

[@mrjibrox]

Legend……Man i can never get enough of watching your vids…. Motivation at its finest

[@PGriff]

Good news the frame doesn’t look too bad under the a-pillar. Vacuum bleeding coolant in anything mid-engined is pretty standard, surprised you didn’t think of that one. If you can’t vacuum bleed it, another way is to get the arse-end as high as you can when filling the system - not perfect but it can be enough. On the older Caymans/Boxsters the coolant cap has a little manual valve on the top you can open to help purge any remaining air after filling

[@scottryan1989]

Love your videos can’t wait for more of these, look forward to your vids mat, KZbin legend

[@barryquinn5840]

Best car repair channel on TV or KZbin

[@adamroutley]

My favorite channel on KZbin currently!

[@Ka0s007]

Just my opinion and not detracting from the video - the A Pillar is deformed which ever way you look at it, I can see the dent. You have to remember that this car has already rolled, probably into a ditch as the door marks are from lifting straps. The fact that the windscreen was shattered in such a way suggests A pillar loading. I wouldn't be surprised if getting the windscreen in properly will be an issue. That A pillar is what stops the roof collapsing in a rollover along with the B pillar. Please get it inspected Mat, Id hate for anything like this to hold you up further into the build. More top content however :)

[@richardcope8102]

You are totally amazing ! The projects you take on are quite something !

[@mattevans7150]

Genuinely feels like this one could be the toughest rebuild yet matt. So many panels and pieces of glass are going to need sorting. And that's before any mistakes or surprises come along.

[@Days1485]

Sunday night isn’t complete without a Mat Armstrong video, fantastic content once again; gutted its only 17 minutes long, think I’ll go back and watch the z range Rover series 😀👌🏼👍🏻

[@DocTheGuitar]

Officially my favourite YT Channel

[@CM-pb4is]

I absolutely love your videos mate. This channel is where I grew my love for cars. Biggest fan from South Africa🇿🇦 . Keep it up !!

[@ThomaxVision]

Love this project so much, hope for the best and that engine is fine. This is a amazing car.

[@stephencarter6634]

Amazing what you’re doing, can’t wait to see the finished car 👍👍👍

[@jonathansmith2407]

It shares parts because it's part of the VW AUDI Group, there's normally a bleed program for the cooling system on these new VAG motors so double check if it has one, there will be many parts that are off other makes and models so check everything including seat and skoda, might help you keep costs down more

[@mikecurtis8891]

This is reverting, really enjoying this adventure, keep going Mat, best yet.

[@grahamsalmons2027]

I love the way we get to see everything, mistakes and all! Awesoke

[@lesleythorpe5307]

I’m loving how all the videos are all in the one place, cheers guys

[@MR94JOKER]

I really like your attitude Mat, gotta respect that Keep it up

[@growthmotivemedia]

On Facebook they make a template of the damaged part on the vehicle then weld it on they do it so seamlessly it's amazing...

[@amac8487]

Looking forward to watching this all play out! Ironically, I purchased a 718 GTS in GT silver metallic last month as well :) I must say, the car still even looks good all ripped apart... lol

[@EmanzASR12]

You are doing a very hard work, so mistakes may happen, just keep working and beliving in the project!

[@christame994]

Can't wait to see more on this porsche and eventually see it on the road! Perhaps a change of colour at some point?!

[@3000malc]

good vid mat, u must be the hardest working youtuber in the country, good luck to u and congrats on the new unit.

[@chrishemming9976]

Love this build! Always learning aren’t ya fella! Doing good tho bro so keep it up

[@CEO_Belal]

Mat - my car needs its alternator changed so bit stressed and your vids just make me forget about it👍

[@kevinisaac9139]

Great video Mat I’ve got a boxster bloody unlucky on that rad looking forward to seeing the next video

[@TheMrFishnDucks]

Great first episode. The damage seems to be from the tractor cranes that sometimes are lifting up F1 cars from gravel. Looking forward to the next part. Keep up the good work.

[@daanwth]

The camera and voice over quality is amazing bro!

[@markusrosch4878]

If anyone's able to get this baby back on the road, it's Mat. Big respect, I love your content. Can't wait to see your next video mate!

[@Theyardonthehill]

Throw enough money at it and anythings possible

[@parkecorepersonaltrainingp2601]

Man feel for you. But looking back to how you have brought the other cars back from the dead I’m sure you have got this you have such positive vibes and a good team around you. You cats have good this 👍👍🤗. Great vid

[@paulchinnery6560]

As I was watching you filling the cooling system I'm thinking you have to vac the system down under the engine cover to get the air locks out. Check out the rad part numbers they look acactly like the 987 Cayman rads, you could probably get them a lot cheaper.

[@gt197]

Keep going Mat..learn as you go 👍🏻

[@tonyjones7372]

Did not think you could top the Aston, but you have, this will be one hell of a build story.

[@MuchengetiF]

I'm in Zambia and inspired by your guts to take on these projects Something I'd like to do as a hobby one day

[@rayscott2611]

I have Jag. Would like to see you do one up. Fingers crossed on this rebuild I think you're going to need it.

[@garyguest6896]

Another brilliant watch mate I dunno how you manage to remain so cheerful it’s a wonderful trait 😂 good luck 👍🏻I will be watching this with interest

[@briancorrigan5350]

You'd be amazed how easily you can repair bumper covers with a cheapo soldering iron with a flat foot, some matched plastic type filler rod and some stainless steel screen material. Bevel a V groove in the front of any tears or cracks, back it from behind with the wire screen embedded into the cover with the soldering iron and then fill the front groove and sand smooth. Then skim with flexible fillers designed for bumper covers. I saved a Volvo C30 cover that was torn up quite a bit doing a project during lockdown. The replacement cover was dear, and even second hand covers were too much. No one can believe the before and after photos. Judicious use of a heat gun will also help with any major deformation. In sunny California, I just left it out in the sun. Generally it's a bit soggier by you.

[@justinas666]

I'm so happy for better video quality on your channel 😍

[@panchit0z]

This is gonna be one amazing build 🙌

[@Vass881234]

Sonfar so good, i just had both front air con rads changed, cost me £460 with a regas. Youll get there!!!

[@Spencerlayne]

I like the way you know enough but you still learn odd things man. Like I said before. Great channel man. 👊🏾

[@CF_Joel]

Mat Armstrong speaking concern about further cost, further repair, and further labor, HAHAHAHA!!! Where's that clip of James May? Hey , man, I've never binge watched a single channel like this before! Great content, great inspiration!

[@maxlandy7642]

Looking forward to this one. Just love your builds.

[@nickcowen4565]

ah man that sucks big props for still posting the video a lot of other youtubers wouldn't

[@Titch58]

Good work as always, mate. Liking the new camera!

[@MrWoodyJvo]

As always, a lot of time for this series. Looking forward to this one

[@fast_eddie3441]

My heart actually sank when I saw the 2nd rad drips 🙁 Fascinating to watch and good luck mate.

[@shellyjack100]

Keep going buddy loving the content it’s brilliant peace out ✌🏻👏🏻👏🏻

[@timgreen7409]

Real interesting. I think that damage is significant its a small frame in a mighty car. Love to hear race marshalls opiniom on cage damage

[@petermarks5703]

I would have asked for some kind of discount..but fair play Mr Armstrong for taking on another project that people wouldn't think twice about lol..keep doing what you do, and I can't wait to see what you do with the BMW csi

[@matthewbell5619]

I used to work at copart on the transporters collecting the cars, I can tell you now that wouldn't be from copart loaders that's more then likely from a recovery company using their forklift to move it around (seen it so many times) only bit could have been copart is back bumper as they not ment to lift from the side

[@vincentcarter4932]

Love your video's,but have to say the Aston V8 vantage was the best looking I've ever seen 👌

[@ateljee8382]

Might have missed it in a previous episode, but I would suggest taking a subscription on Autodata or Vivid to deepdive into some workshop data and info. Found it always very helpful to check certain stuff before working on it. Don't know if it would've warned you about the airlock though. Anyway, seems like a real challenge this one. Good content, fun to watch.

[@therealaa24]

Loving the new camera! Looking sick!

[@Luistmw]

If you get the gt4 front bumper kit u dont need the lower bar. Im going thru a rebuild of one of these my self

[@jeangenie68]

Have you tried T-Cut? Most of that should polish out.

[@johnbaldock6353]

This is going to be A GREAT SERIES of Repairs!👍

[@jaydigpal8821]

got too say Matt has definitely inspired me too modifie my 530d. before I was too scared too Jack up the car . 😆 thanks matt

[@lawlessskates]

My lord at the end had me in stitches 🤣🤣 Had a very similar experience, expensive lesson for us both 🤣👍

[@markd6838]

knew you would post today, good stuff, happy Sunday everyone

[@leonelsalgado5725]

i dont know but ... they quality of image is a lot better? keep strong, happy and with your good vibes Mat.

[@RichOvertonGasoline]

Mate I feel ya pain!! Good see someone else having issue rebuilding a Porsche 😂 my has taken me 12month 2 steps forward 3 steps backwards.. But another great video 👍🏻

[@mathiashaugland4229]

So happy to see you doing a porsche! Cant wait for more

[@officerponcherrello1182]

Loving the Porsche tear down. Positivity all the way too - the only way is forward.

[@clarksargeant8446]

Can't wait for the next one. I'm hooked!

[@Human2Ai2030]

If I am not mistaken,, the new aluminium panel's are bounded onto the chassis. You use a special adhesive. Looks like that Cayman was rolled over in a field a few times ! Get a front windscreen and see if it fit's before doing body panel's,, incase A pillars are slightly twisted out of line. Stop bidding on cars when your high 🤣