Reciprocasting Saw Restoration | Makita JR3070CT

Reciprocasting Saw Restoration Video
This is old project that I done last year, the video length is too long, viewers take time and get boring to understand this project. So I reedit it to save viewers time and understand it easily.
I hope you find something useful & enjoy this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

[@derbimota978]

I am amazed. Okay, I would disassemble and wash, but I would never put it back or put it back together and I would have a lot of extra spare parts))) Great job)) Respect from Russia)

[@anen5188]

Dang Makita is a brand that can be trusted ,Good restoration.👍

[@lopodemoshacer0210]

Es un placer ver la forma como arreglar las herramientas de trabajo tanto inalambricas como con cableado.

[@ArmchairWatchmaker]

Just today I bought this very model. I tried several models in the shop and this one felt very solid and powerful, I liked it. It seems I made a right choise. :-) And, man, you did the impressive job on repairing this one! My respect.

[@barthanes1]

Always a great show, thanks for sharing.

[@rla26368]

Very nice restoration! Great results. Thanks for the vid!

[@frk380]

Great restoration 👍. Every thing look old but armature look brand new.

[@ВладимирШвец-и9ф]

Круто ,это лучшая сетевая сабельная пила.👍

[@АндрейНикитенко-ф4с]

The work deserves an excellent mark. It can be seen that the master knows this his work. Of course, it could have been a little better cleaned from rust and traces of time, but only for aesthetics. Everything that is needed for the device to work has been done. My respect.

[@brahimsaidi1670]

Master of restoration. Good job. 10x for sharing.

[@eduardokleiniahnke245]

thank you, you helped me a lot when disassembling the tip of the blade! thanks

[@toolreviewsandrestorations]

You did a great job on that saw!

[@Djexxy]

I've had the same one in my garage for a while, it only worked half the time. You made me want to take care of it, and after removing only five screws I could understand that the problem was just the switch.. So I think not to stop there and finish its restoration ^^

[@carebear1488]

I wanted to thank you for this informative and well edited video. I bought a second hand JR3070 And it was in better condition than this one but far from its prime and your video helped me improve things a bit. I'm not exactly a handyman and not very skilled , but you're video was so easy to follow , with little room for doubt. I enjoyed how you filmed the same process from different angles , it really makes a difference. And , like they say " sharing is caring " and it's even more relevant with teaching skills ...

[@gear_show]

I'm glad this video helped you. Thanks for sharing your thoughts!

[@carebear1488]

@@gear_show trying to further do further maintenance on my saw , I'm stuck at the 2:39 part where you use magnet to disassemble it ... the gear seems stuck and no magnet I own seem to be strong enough . You seem to be able to remove it with ease. What am I missing ? thank you in advance for any answer ! :)

[@vedantkaothekar8089]

You have done good job sir I am 15 years old and I also like this restoration work . I have all tools that you have please make these type of videos and guide me Thank you

[@gear_show]

You're welcome, I'm so happy to hear that :D

[@СергейСамойлов-х2в]

Отличная работа, молодец!!!

[@КошмарКошмар-й2б]

Hi Gear Show 👋👋👋 good to see you 🤝🤝🤝 disassembly and assembly of the tool at the highest level👌🏽 awesome restoration 👍👍👍 so keep it ✌🏻🇷🇺

[@gear_show]

Hi Кошмар Кошмар 👋👋👋nice to see you again 🤝🤝🤝thank you so much 😊😊😊

[@nguyent2477]

So investing in Makita 👑 is the best at this time 👍

[@prasadvn524]

What a video.I loved it.Thoroughly professional.Keep it up.

[@gear_show]

Thank you so much!

[@wrchung]

It’s amazing that Makita still sells parts for it!!

[@ampac]

Well, this model is still being produced today and continues to be Makita's top of the range heavy-duty reciprocating saw. It is an impressive power tool.

[@FerSniper]

СПАСИБО ЗА ВИДЕО!!!

[@TheIdeas4life]

Nhìn giàn đồ nghề là bít vietnam, cũng chuyên nghiệp phết

[@lcampm2]

Very complicated and great restore

[@gear_show]

Yes, thanks

[@Rusty_Gold85]

at 5:30 it shows the amazing number of parts that must have taken hours for each one , each piece to be made originally

[@little_brat.]

This is the moment I'm always waiting for the most! Apart from the final effect of course :)

[@fabbro9999]

Excellent work on an excellent saw

[@mr.martin4954]

My favorite channel. Thanks for the video

[@MuhammadDaudkhanTV100]

Good to hear

[@Kevin-gx8lc]

Fantastic work, very well done Sir! Greetings from Southport UK. 素晴らしい仕事、とてもよくできました、サー！サウスポートUKからのご挨拶。

[@jasepoag8930]

Holy crap, that thing has A LOT of parts.

[@Art416]

Another awesome restoration greasy job

[@emmanueljosueful]

Excellent video thank you very much, in the end why didn't it work? I have the same machine and the same thing happens to it, when you connect and hit the trigger it doesn't do anything, thank you very much

[@ozcansezer1950]

Güzel çalışma olmuş emeğine sağlık kardeşim

[@haletismail6944]

Magnificent job I really liked it

[@jonnygg6594]

I'd drink a San Miguel with this guy!

[@petrvlach623]

Pěkný košile. ☺ a zase skvělá práce.

[@MuhammadDaudkhanTV100]

Sweetheart and very nice video

[@ՄենուաԹագավոր]

Good job 👍

[@gear_show]

Thank you! Cheers!

[@MuhammadDaudkhanTV100]

Excellent working

[@jasonhaygarth3889]

awesome as always

[@plunder1956]

Internally it's in quite reasonable condition & it's a decently made device. Look for a basic parts washer, it really helps.

[@gwav1a]

How do you get to remember where all the nuts, screws, bolts etc are meant to be? Amazing!!

[@MultiBegbeg]

Slt , sacré restauration de la scie sabre .👍

[@livay2865]

Always on top..👍

[@yasinkoraykocak]

hi from turkey in istanbul...

[@gear_show]

Hi, nice to see you here!

[@yasinkoraykocak]

@@gear_show watching all his videos is very enjoyable. Thank you

[@gear_show]

@@yasinkoraykocak I'm so glad to hear that :D

[@MeilyFoodie]

I love ur video so much brother, nice work 😘

[@gear_show]

Thank you so much Kim Meily 😘

[@MeilyFoodie]

Gear Show keep it up 👍😘

[@craig2535]

Cool. I wish I could do that.

[@iraqisonic9920]

أحسنت عملا

[@Abhishekverma-2024]

Bhai bhot badiya

[@justiceisserved3298]

*Reciprocasting* 👏👏👏

[@robertgrell486]

Awesome

[@davidgaleano786]

Perfect

[@saifrajon4155]

I really like your work. But I have a request , since I have seen you restore quite a few Bench Grinders, would you please do a Video on installing variable Speed Controller & a DPDT switch for forward and reverse on a Bench Grinder, Please?

[@little_brat.]

You made my day Mr!

[@Codename-B]

Great Job! I have one question: What do you spray the carcass with once you done washing it? Also what kind of soap do you use for washing the plastic parts? Thanks!

[@ampac]

Plastics and rubber can be revived and preserved using Silicon Oil / Lubricant. This is the spray that was likely used in this video. You can use warm water with dish washing or car washing liquid to clean most plastic parts. Degreasers can be too aggressive for some plastics.

[@aworkingmanspride2494]

Well done bud

[@gear_show]

Thank you!

[@jitenderwhatsup9165]

Good Job Bro ...

[@abodsalha6475]

always great job like all time ☺️👍 I think you restored the same machine before really ? 🙏

[@A3b320]

Anh giỏi quá.

[@TreyLin]

Hi! I really enjoy your videos, but I always wonder what did you paint on the plastic cover? wax or lacquer varnish? Thanks

[@AKSA1445]

Woouw Master 💪👍🏻👍🏻👍🏻🇦🇱

[@DABA43088]

This is my day to day job, I repair 10 Saws in average per day. Please do you know the reason of guide plate breaking? Most of the time I replace guide plate and the bottom bearing on the slider.

[@windowsxpprofessional]

Reciprocating saw: I am dead Gear show: no u r not *After somedays* HAPPY NEW LIFE

[@hansolheo4914]

Like the repairman of toystory series

[@windowsxpprofessional]

@@hansolheo4914 ya

[@andjuju6476]

Awesome job.

[@gear_show]

Thank you!

[@ЮрийЮрий-ж3з]

Молодец 👍

[@Fiul77]

nice job

[@nabeelzaini]

very good job sir

[@kikogarza6310]

Perfect i like 100%

[@jitenderwhatsup9165]

It Is Like A Old Jigsaw

[@ЭдуардБахарев-к7х]

Деталей больше чем я думал но здесь есть функция подкачки и противовес как на лобзике . Апарат зверь я бы такой купил однозначно . Только не понял блок плавного пуска есть а включается сразу на полных оборотах .

[@roberttiler2088]

Продается. От 14 тыс в РФ

[@treyjohnson846]

Where are you finding all those oem parts? I’m trying to find a gear to restore a makita hammer drill. It’s out of stock everywhere.

[@gear_show]

I order from Makita store in my city.

[@АкбарКузиев-ъ8в]

...

[@hansolheo4914]

This Video for relaxing again stressfull day

[@Masso1973]

How do you get a saw into that state? I have the same one, it hasn’t been out there that long I believe...? Also a very tough tool. Respect for fixing it, 👍

[@RaM-bk9fu]

this guy live in japan, near Tohoku region which is was hit by the earthquake plus tsunami on March 2011, that is way lots of the tools on this channel before restoration looks like already submerged in water for some time,,,, and i believe he got the tool from recycling shop,,

[@mdhebert]

good and helpful. Thanks!

[@ippitblack5289]

Respekt!!!!!👍👍👍

[@angvantrinh5137]

những đồ dính dầu mỡ chỉ mang rửa nước xăng là nhanh rồi mang đi rửa xà bông là sạch

[@DDRWakaLaka]

will a reciprocating saw tell me it loves me back? :'(

[@gear_show]

It will answer after you use it.

[@djamelhamdia134]

Hug it when it is on,you'll now.

[@tomlee7966]

nice work

[@GuessWho-uc5uq]

Maybe i missed it but what was causing the issue for it not working?

[@E-hab]

Do you use "Lithium" grease or "silicone" grease?

[@Steve_K_MS660]

I thought it looked familiar!!🙂

[@bremen123123]

Was war kaputt an der Säge ?

[@roberttiler2088]

Сложно, сложнааа!!! )

[@djamelhamdia134]

It's actually an impressive job to be honest. But you didn't replace the broken bolt.

[@fredericthom8113]

omedetou gozaimasu !

[@انصارالامامالمهدي-ص8ظ]

Okay..good

[@thesolojourney8955]

A brand new one costs $230 at Home Depot, how much would a broken one or a restored one cost?

[@sharukhmatekuki5830]

Good hit🇮🇳👍👍 Kuki

[@luisfernandoaliaga4466]

exelente

[@digga5971]

Please clean the Parts mit Petroleum. I like your work, I really enjoy watching your videos.

[@lightbatmen]

5:25 Жёстко... Хардкор.

[@mohmmedelwwkil1261]

Waw❤️🌹

[@yudhajr4643]

hadir bang☺☺☺☺

[@taunteratwill1787]

We KZbin viewers DEMAND to know where you get all these old machines! :-))

[@gear_show]

I got them from Japan recycle shop

[@taunteratwill1787]

@@gear_show Wish we had a shop like that, good show.

[@skilatchi3307]

Top

[@barthanes1]

I wish those cert clips did not always go under the bench on the other side of the shop when you remove them.

[@E-hab]

Just like springs

[@evildad920]

👏👏👏👍

[@kirikhanliismail]

👍

[@VP2]

‏Где ты взял эти клауаааты?

[@alexpetroff5633]

👍👍👍👍👍👍👍

[@amboss594]

El comentario no lleva ninguna carga semántica, sirve de apoyo al canal y agradecimiento al Autor.