1 BY ONE Luscinia Turntable - Unboxing & Review!

This one surprised me! See if you agree!
1 BY ONE Luscinia Acrylic Sheet Turntable, Belt-Drive Vinyl Record Player with Bluetooth Connectivity, Built-in Phono Preamp, USB Recording RCA Output, Adjustable Counterweight and Magnetic Cartridge
Grab one here; amzn.to/3IrZh6E
Purchase Exclusive Orange 45 Adapter www.ebay.com/itm/364102439728...
Purchase Exclusive Metallic Purple 45 Adapter www.ebay.com/itm/364102439928...
We play records on TikTok! www.TikTok.com/@recordology
Thank you for watching and subscribing and commenting! You guys are awesome and we appreciate each one of you!
Looking for something interesting to watch? Check out our older videos and also our playlists! Could you do us a massive favor? Tell a friend about Record-ology! Better yet, share us out on your socials - then give yourself a shoutout in our comments!
Original content Copyright 2023 Record-ology. Check the ‘about’ tab for full info and disclosures.
#vinyl #vinylcollection #vinyljunkie #vinylcollector #vinyladdict #vinylcommunity #vinyligclub #vinylporn #instavinyl #vinylrecords #popvinyl #vinyloftheday #vinylcollectionpost #vinylgram #funkopopvinyl #vinyllove #vinylrecord #vinylclub #vinyls #vinylwrap #vinyllover #vinyllovers #vinyljunkies #funkovinyl #vinylcollective #coloredvinyl #vinyltoys #vinyldecals #popvinyls #vinyladdiction #vinyllife #vintagevinyl #igvinylclub #vinyle #ilovevinyl #vinylstickers #vinylgeek #vinylart #vinylfigure #vinyltoy

[@TheSkuncle]

I actually got this very turntable about a month ago. I was upgrading from a base model Audio Technica table. The first thing I noticed was how incredibly heavy the platter was. I was very surprised to see that no RCA cables were included, I was hooking it to my existing receiver so I needed the RCA cables, luckily I had some. I have no plans to use it with Bluetooth or even to connect it to a computer, so I haven’t tried those connections. When all is said and done I am extremely happy with this turntable. I bought it with no knowledge of this brand and could find nothing about it. In fact your review is the first thing I’ve seen about it. As I said though, I am very happy with it and my records have never sounded better.

[@Greg-et2dp]

Record ology your new Luscinia 1by 1 turntable is awesome my friend 😅😅😊

[@petersopacua9349]

What a pretty nice turntable , and i love that test record that you put on the turntable !!

[@bwware]

As may 21st, Amazon even has a $30 off coupon for this turntable making it only $130! UPDATE: ok, based on your review, I bought one! Will arrive today. I see the price went up $10, the $30 coupon is gone and they only have 4 left in stock! Can't wait to set it up when I get home!!

[@jackelofnar]

My niece has been asking me a recommendation for her first turntable, looks like this could be the one

[@MMID303]

It actually seems really nice! I was guessing $250. But I can't help but wonder...was the tracking force accurate? Did you ever test it? My OCD was going nuts!! Lol

[@frankdawsonjr]

same about the tracking force....trust but verify...lol

[@chrislj2890]

Appears to be a great value for someone wanting to dip their toes into the vinyl world.

[@rastaman5105]

I like that album that you play on that nice turntable !!

[@Greg-et2dp]

Record ology I learn a lot from you about bying used turntables and new turntables my friend 😅😅😊

[@luckytech7186]

I was thinking around $299. Very nice at $159. I would look forward to a long term test of it.

[@Malikgramophonehouse]

Yup

[@vwestlife]

The knockout plug on the back would be for speaker outputs, on a model that has a built-in amplifier.

[@Recordology]

That’s what I’m hearing.

[@1byoneofficial]

Thank you for all you did.

[@Recordology]

It performed well!

[@ronaldweed6103]

I'm liking that turntable. Like you I thought it would be more. The needle, stylus,what would you recommend for a upgrade? Well done friend.

[@jro7075]

I LOVE the look of this TT even as a manual I LOVE the way it looks I love the finish there are ways to keep dust and finger prints from surface ,like don't touch it ,there is no need to and a microfiber cloth will keep it clean ,having dust covers on my TT's I just pass a micro fiber cloth over them once a week and they stay clean and those accents on the acrylic cover are what keeps that piece on TT which I think is great ,I would almost trade in my C-10 for this one the platter wobble is not bad it is the way it was cast that the edges are not even ,I have the garrard AT-60 TT with a heavy aluminium platter as it spins the top of platter is straight but at the edge of it there is one little spot that dips a little it was how it was cast ,the price is fantastic very tempted to get one I mean it is a new brand name but it looks great the base is real solid wood not hollow like the fluance brand TT not impressed with the way it is built both made in china but I would choose the lucinia over fluance you have a solid build TT compared to a hollow unit ,not saying they are terrible they always looked nice to me but isn't it what they complain about on some other TT's like the at-lp120 plastic build but hollow and a lot of the other brands fromaudio technica has not to mention other brands that use the same kind of build hollow ,and I like that you mentioned that the spindle is to be oiled before using cause as you can see the bottom of spindle bearing has a ball bearing but it will dry up cause it is not a sealed bearing and the oil will dry up in time even the C-10 recomends that it be oiled every 6 months depending how much it is used there are lot of TT's you have reviewed that has the same type bearing system and should remind the viewer about the spindle bearing and bluetooth to me is not important there are very cheap but well made bluetooth recievers and transmitters that cost from 5 to 20 dollars that are battery charged or powered that you can hook up to any part of your system ,i have a device that cost only 5 dollars that recieves and transmits blue tooth to any receiver on a batt charge and it lasts up to 8 hrs on a charge ,I used it on my dual ,garrard audio technica my tv anything that has a headphone jack or outputs it can save a lot of money ,i use this mainly at my job since they upgraded my computer but it does not have BT unless I get the comp expert to set it up but found out they had no time , but like you said 2 thumbs up is a fantastic TT to me I like this one even as a manual JRo

[@larryshaver3568]

lubrication is a great idea. i just re-built a few motors that looked like they hadn't seen a drop of oil in at least 35 years

[@TorontoJon]

0:00 Nice Rebel A-wing fighter in the background. :)

[@pervertedalchemist9944]

Funny that you mention the Crosley C6, because it has a similar tonearm and Audio Technica needle. It even has the same exact rear layout as the C6 - right down to the buttons, power switch and outputs.

[@elvisway1]

You are correct. I have a C6B that resembles that 1By so much except for the Gimble and it's flat finish.

[@jmi5969]

The paper with flashy ad blurbs reminds me of the good old boomboxes of the 1970s and 80s. Precision high torque motor! 2000 Watts PMPO! I felt heartbroken when you discarded it.

[@MarquitasKnottyCrush]

Thanks for the review but I am super jealous that you're in arms length of the millennium falcon!!!

[@Greg-et2dp]

Record ology I am thinking about getting the Luscinia 1by 1 turntable my friend 😅😅😊

[@SnapperX3]

Saw a couple videos where the 2.5 marking actually was 3.5 g when measured. 1.5 setting gets you 2.5g. I should add, I bought one last night. $122 with my dicover cash back bonus points.

[@stanleycostello9610]

A nice TT. For my money though, I would spend a few bucks more and get an Audio Technica. If the platter is cast iron, is the motor strong enough to have years of service without its failing?

[@larrylarry1]

He just played a record from the 1960s. Vintage or modern? Mr. R, you could've measured the tracking force with your little scale device dropping the needle on it . Good video on a new brand and player!

[@CounterRhythms]

I really like that acrylic top. What a steal at that price!

[@Recordology]

Agreed!

[@shkafln123]

I have this same exact one just unpacked paid $16 at an auction

[@dzivin7069]

You can't go wrong

[@dwsh1]

I have a concern... This turntable's platter I've finally confirmed to be iron. Iron is a magnetic metal. To those who own this tt: Is the platter magnetic or not? And if it is, aren't you worried about it adversely affecting the cartridge? Thanks.

[@Jammerk40]

I wouldn't mess with the speed for 45 rpm you wouldn't even notice that it was a little fast! Did you check the weight was it right on? Heck if I didn't have my fluance this would be a perfect turntable to start off with! Thanks for the video!

[@Recordology]

I need to! 😀

[@Jazz-and-Coffee]

What’s that awesome vinyl album you’re playing? And great price point on this TT

[@Recordology]

Future Sound Shock by Enoch Light! Amazing album.

[@Recordology]

Future Sound Shock by Enoch Light! Amazing album.

[@MuzikJunky]

Similar belt-drive mechanism found in many of these higher-level Chinese-made units. Peace.

[@Tuggle]

is it just me, or are the audio clips playing in mono?

[@Greg-et2dp]

Record ology does the Luscinia 1by 1 have a Built in AMP so you can hook up two speakers let me no when you have time to right to me on my cell my friend 😅😅 😊

[@Greg-et2dp]

Record ology my hobbies are painting 🖼 and listening to shortwave and ssb and I have 5 shortwave receivers and iam thinking about getting my ham license my friend 😅😅😊

[@arnoldtolker3505]

Schönes Gerät! Leider in Germany nicht gefunden.

[@MKPatrick]

Appears to share a lot of parts with the Fluance RT80 and 81. Likely made on same factory in China. The auto stop based on output is the biggest giveaway. Not a bad turntable but a little more cash will get you something significantly better. Bluetooth and USB are largely pointless unless you really need them. Ultimately you lose your "analogue" listening the second you engage them.

[@chrisschanneloftechnology4743]

That knock out area would be for a model that would use external speakers

[@xaenon]

I was going to say for a model with a built-in PSU.

[@stevesstuff1450]

External POWERED speakers would connect directly to the RCA out connectors; they don't need or use a 'dedicated' connection...if they're not powered speakers, then you'd need to connect to an amplifier (via the RCAs) which has the speakers connected to it. Or, of course, the turntable would 'hopefully' use its bluetooth to connect to external bluetooth speakers.

[@MKPatrick]

Absolutely right. This is based on a generic Chinese design that they are pumping out under a hundred different brand names. Fairly decent for entry level but not much more cash will get you a much better turntable.

[@AsylumGeniius]

My turntable came with the sub-platter flipped and I don't know how to take it off in order to get the protective sheet off. :(

[@Recordology]

Very odd.....I would contact the manufacturer.

[@Greg-et2dp]

Record ology my other hobby is listening to rock music from the 70s and 80s and 5os and 60s country music and 20s 30s and 40s music my friend 😅😅😊

[@Ricecooker64]

There is some flaws, but they definitely did their homework!

[@vinylholicsanonymous3871]

Is the platter off a bit? It looked like a bit of wobble there.

[@Recordology]

A touch - yes.

[@junpantilano1]

I noticed that RCA cable is not provided. Why is it so?

[@Recordology]

Good question

[@steveweinberg462]

Nifty turntable. For further info on why a barrel shaped pulley... kzbin.info/www/bejne/in_Yq5xjn7KLpbs

[@avronaut]

Nice device. But the belt doesn’t look good. The surface already shows cracks.

[@Recordology]

I know - weird.

[@u.s.armyvet8947]

Nice review. I enjoy a lot of your videos. Am curious though, which of 1ByOne bluetooth turntables do you think is better? This model or the other table you reviewed for Vlogmas, Day 15? (Link below) I like the appearance of the older table more, but like the sub-platter design with the Luscinia. Interesting design also with the counter-weight. Also, did you ever get the bt function to work? I'd like to get a second turntable that has bluetooth capabilities. Thanks in advance and also for your reviews. kzbin.info/www/bejne/o6OTfYuYotSZfKM

[@michaelturner4457]

"modern vinyl" So it's only for playing modern new and vinyl records and not the old and vintage ones?

[@nelsonnichols922]

Seems like a lot of turntable for the money

[@Recordology]

Agreed

[@greysuit17]

Don’t think you can get these anymore

[@Recordology]

Dang looks like you are right! I wonder why they pulled it?

[@greysuit17]

@@Recordology too much quality components for the price? 🤷‍♂️

[@brettc132]

Just a little fun fact Luscinia is a species of birds, Just a bit of useless trivia love your videos. en.wikipedia.org/wiki/Luscinia