How to Fix Mac Won't Boot into Recovery Mode

[@lance3681]

A great video and clearly explained, thanks. But, there is one but, you explained how to boot into Recovery when the key combination fails. But than you. advise to do a repair or reinstall from the Recovery mode which you reached by holding down Cmd and R-key. But this was what it is all about, I can't boot into local recovery. A reinstallation did not help. Cmd + R gives a black screen all other key combinations bring me to Internet Recovery. What I am after is why did it stop booting into local Recovery and how to repair that.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! It sounds like your local recovery partition might be corrupted or missing, which prevents you from booting into it with Cmd + R. If you tried all the steps in the video I would recommend taking it to a professional for further assistance.

[@edwardmacnab354]

switch to microsoft or Linux is the best solution

[@babsbunny1983]

My MacBook Pro won’t fully boot up. It just turns off. I’ve tried recovery, reset, SMC… Nothing is working. Any advice on what to do?

[@wirelessgaming6640]

Got any solution?

[@marcialarmenta2049]

Great video! it helps a lot, but I have a question if these methods are applicable for Mac Pro 2010 with mac os sierra? Thanks in advance

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Yes all the methods mentioned above should work with Mac OS Sierra.

[@rajwankhede5218]

Thank you

[@ForTheFLOL]

After turning on my Mac and holding down Option+R, it would shows the Apple logo and status bar, then shut down after about half a minute. No matter what I do, I cannot get it to enter recovery mode. Any idea? Thanks for this video.

[@nolag6643]

same..

[@winnersmiling]

its command R

[@winnersmiling]

and u can do internet recovery it doesnt remove ur data

[@jabeenanees4885]

Same

[@tdpropictures]

Having same issues

[@djoge4092]

Just a folder with question mark Cmd r or none of the buttons the comments suggest work Just the white screen with the ?folder again and again

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! First try shut down your Mac then turn it on and immediately hold Option (⌥) + Command (⌘) + P + R for about 20 seconds, then release. Then try restart your Mac if that doesn't solve your issue it could be a hardware related issue and i would recommend taking it to a professional for further assistance.

[@sbrave2]

I'm getting some kind of kernel panic message when Internet Recovery starts. I can't read it bc the screen rez is too big when I enter Internet Recovery mode. 2014 Mac Mini / Catalina

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! A kernel panic during Internet Recovery on your 2014 Mac Mini suggests potential hardware or software issues. Start by disconnecting all peripherals except the essentials, then reset the NVRAM/PRAM (Command + Option + P + R) and SMC (unplug the power for 15 seconds). Boot into Safe Mode (Shift during startup) to check for updates or driver issues, or run Apple Diagnostics (D at startup) to identify hardware problems. If possible, use Target Disk Mode to connect the Mini to another Mac for troubleshooting, or create a bootable macOS Catalina USB installer on another device to reinstall macOS (Option during startup). If issues persist, test the RAM with Memtest86 or inspect internal components for damage. For persistent problems, consult a technician.

[@gammadinesh7934]

Nice.

[@kennyg4744]

I have a 2018 Mac Mini i5. I dont have a mac keyboard, just a windows one. Mac was running fine. I chose to do the upgrade to Sonoma. Now all the machine does is show the LED on the front. Nothing else. No fans, no video, no chime. I tried your suggestion of reset SMC, but when I switch it back on, nothing happens, jst the LED comes on. I would be very grateful if you could help. It is as if it is in a permanent stand-by mode, but thats not possible as I have had the power cable disconnected for over 5 minutes at times.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Disconnect all peripherals from your Mac Mini, including the keyboard and mouse. Unplug the power cord from your Mac Mini and wait for at least 30 seconds. Plug the power cord back in and press the power button to turn on your Mac Mini. If your Mac Mini still doesn’t boot up, try resetting the NVRAM by holding down the Command + Option + P + R keys immediately after pressing the power button. Hold down the keys until you hear the startup chime twice. If resetting the NVRAM doesn’t work, try booting your Mac Mini in Safe Mode by holding down the Shift key immediately after pressing the power button. Keep holding down the key until you see the Apple logo on the screen. If your Mac Mini boots up in Safe Mode, try running the First Aid tool in Disk Utility to check for any disk errors. If any errors are found, try repairing them. If none of the above steps work, you may need to take your Mac Mini to an authorized Apple service provider for further assistance.

[@kennyg4744]

@@RecoveritDataRecoverySoftware Many thanks for the reply. It is now sorted, but a totally strange one. The issue turned out to be the monitor. It is an NEC that runs 1600 x 900. This worked perfectly well with Monterey. But Sonoma wont work with it. Tried an Iiyama 32" monitor at 2560 x 1440 and it works fine. Even if I force the resolution to 1600 x 900 and reconnect my original monitor, it wont come on. But I've got a spare Dell 24" monitor that I will use instead. Thanks again.

[@Quami_Plays]

My mac 2015 won’t boot pass apple logo, can’t enter recovery mode or any other mode. I have tried smc and pram reset still same results what do I do?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend taking it to Apple for further assistance then.

[@trilolized]

please help my macbook 12 inch goes into internet recovery mode but then goes back to choose the internet page!

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Make sure your Mac can connect to the internet recovery server. You can try to use a different Wi-Fi network, or connect your Mac to your router with an Ethernet cable otherwise you might need to take it to the apple store for further assistance.

[@pyper27]

I've installed sonoma with opencore on my mbp 2015. When i press cmd+r while booting up, it boots internet recovery instead of recovery mode. I just need access to terminal in recovery mode. Do i really need to reintall macos? Is it opencore that causes this problem? Did anybody have the same problem and found the solution?

[@pyper27]

Tried entering internet recovery, it just freezes when loaded in.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Sometimes NVRAM settings can cause boot issues. Resetting NVRAM might help you can also try to review your Opencore configuration files (especially config.plist) to ensure there are no conflicting settings related to recovery mode and make sure you’re not overriding the default recovery behavior.

[@Thales-q7h]

Here’s what worked for me: You`ll need a pen drive with the installer of macOS. Plug it in your MacBook. With your MacBook turned off, press command+esc+power. Then you wait for the screen that tells to open sonoma. Now you click space and then click in the shell option. Now write “exit”. Then click to install sonoma. Now it Will boot the recovery local mode,

[@StraightOuttaUrbex]

Mine wont repair the disk said it had failed was working fine last night

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Then I would recommend taking it to a apple store for further assistance.

[@saimtaimur]

Can someone help me pleaseee? I was in recovery mode and i kept pressing utilities and the optionns were not showing i also clicked file nothing workedd the options arent showing and I also wanted to do reinstall macOS I kept pressing it it wasn't selecting it what do I doooooo

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend you try restarting your Mac by holding down the power button, then re-enter Recovery Mode by pressing Command (⌘) + R. If that doesn’t work, use Option + Command + R for Internet Recovery Mode. Once in Recovery, try selecting "Reinstall macOS" and press Return/Enter to trigger it. You can also check your disk in Disk Utility for any issues or errors. If the problem persists, try reset the NVRAM/PRAM by holding Option + Command + P + R for 20 seconds during startup.

[@shalin54]

Hello, my Macbook opens directly to recovery screen, and shows Mactinosh and options or settings. While trying reinstalling the macos…it starts the process and after sometime it just say error occurred try again, tried multiple times. Any idea what to do please

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to start the process in safe mode which you can do by holding shift while booting your Mac if you still get the error I would recommend taking it to a professional as it might be a more serious issue.

[@satarupadeb1111]

@shalin54 were you able to solve this. I am using MacBook Pro and I am facing this issue

[@benkitson1809]

Good video. I’ve tried the various options. I’m not getting anywhere though. It boots to logo / loading bar then after a long wait the select language menu appears. After that, the Utilities menu. There is no backup so forget that. I’ve done the erase the disk thing. Then I try Reinstall macOS. Hit continue for macOS Sierra. Message appears saying “To download and restore macOS the eligibility will be verified etc”. Then nothing. Nothing changes on screen at all. When I click the wifi in the top right, all I get is Turn Wi-Fi On. Ethernet is also plugged in but I have no idea if it knows it’s connected. But again nothing happens. I do have sierra on a usb in the back of the Mac which I cant get to appear to boot from and I’m also using a windows keyboard. Help 😅

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to boot into safe mode by holding shift during the boot process and see if you can bypass the loop if not I would recommend taking it to apple for further assitance.

[@dcarost]

Hello! Could you solve it? I'm in that situation rn and I've tried everything as well.

[@ramanathanmani6686]

Sir i has issue with my battery percentage and the apple technician said to reinstall the macos and after reinstalling macos the issue didn't solved and another new issue created while iam booting my mac i can see progress bar double time please solve my issue iam really depressed with apple

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If reinstalling macOS didn’t resolve the battery percentage issue, it might be due to a software glitch or hardware problem. Try resetting the SMC by shutting down your Mac, pressing and holding Shift + Control + Option + the power button for 10 seconds, then turning it on. You can also reset NVRAM by holding Option + Command + P + R for 20 seconds during startup. Check the battery health in System Settings > Battery > Battery Health, and if it indicates “Service Battery,” it may need replacing. For the double progress bar on boot, boot in Safe Mode by holding the Shift key during startup, or run Disk Utility by booting into macOS Recovery (hold Command + R at startup), selecting your startup disk, and running First Aid.

[@ramanathanmani6686]

@@RecoveritDataRecoverySoftware thx sir let me try and update here 🙏🏻👍🏻

[@terrylim666]

Use Mac Internet recovery method to download a new Mac OS but after few mins it replied with an error downloading pl advice

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend shutting down your mac then turn it back on and hold down the "Option + Command + P + R" and hold the keys down till you hear the start up noise twice and then release the keys and let your Mac restart if that doesn't work I would recommend taking it to Apple for further assistance.

[@EscapeFromDaSystem]

2:50 was not in-depth enough

[@falanafoto]

I have an error for internet recovery code 2012f. Nor will it boot from external drive.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried all the steps mentioned in the video and it is still not working I would recommend taking it to apple for further assistance.

[@jayy2gone]

My iMac just loads and never finishes I tried all these and nothing worked plsssssssssss help me

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried all the steps in the video it might be a more serious hardware related issue and I would recommend taking it to a professional for further assistance.

[@jayy2gone]

@@RecoveritDataRecoverySoftware now I can get into recovery mode but when I reupload macos it loads to -405

[@waterpistooltje2]

Not helpful at all, not a complete guide through. After showing what to do you don’t show what happens.

[@ForTheFLOL]

Don’t do anything he said in this video. Just turn on your Mac, hold cmd+t, when you see nothing but the thunder bolt icon floating, reboot your Mac.

[@sbrave2]

What does that do? I'm having freezing issues every few days and have to hold the power button down for 7-8 seconds, and then restart, only to have to do it again a few days later

[@tigerdigs8228]

What if it has the folder with question mark?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you see a folder with a question mark on your Mac, it means that your startup disk is no longer available or doesn’t contain a working Mac operating system. To fix this issue, you can try the following steps: Turn off your Mac by pressing and holding the power button for up to 10 seconds . Start up from macOS Recovery by pressing the power button to turn on your Mac, then immediately press and hold the Command (⌘) and R keys until you see an Apple logo or other image. Use Disk Utility to repair your startup disk by selecting Disk Utility from the list in macOS Recovery, then clicking Continue and following the steps to repair your startup disk with Disk Utility.

[@theesammy24]

i have question what if nothing works and it shows only white screen? like mine does

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If your Mac shows only a white screen during startup, it may indicate issues with the system startup process, potentially due to hardware problems or corrupted system files. Start by force restarting your Mac and, if the issue persists, try resetting the NVRAM/PRAM and SMC, which can often resolve startup issues. Booting into Safe Mode might help identify software-related problems, while using Disk Utility in Recovery Mode can repair disk errors. If necessary, you can reinstall macOS from Recovery Mode, which usually doesn’t delete your files. For accessing files, consider using Target Disk Mode with another Mac. If none of these steps work, it may be a hardware issue, and seeking professional help from an Apple Store.

[@markbelylian]

Cool 😎 however my laptop don’t even wanna open recovery mode. It freezing so much so it’s can’t even connect to WiFi

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Start by performing a force restart by holding down the power button until it shuts down, then turn it back on. Next, reset the NVRAM/PRAM by turning off the Mac, then turning it on and immediately holding down Option + Command + P + R for about 20 seconds before releasing the keys. You can also try booting into Safe Mode by shutting down the Mac, turning it on while holding the Shift key, and releasing it when the login window appears. Disconnect any external devices and attempt to restart the Mac. If standard recovery isn't working, try Internet Recovery by shutting down the Mac, turning it on, and immediately holding Option + Command + R until you see a spinning globe. If these steps don't resolve the issue, there may be a hardware problem, and you should consider taking it to an Apple Store for further assistance.

[@ForTheFLOL]

Ok y'all, I've found two solutions. If the second solution doesn't work, see solution #1. Solution #1: Buy a MacBook Air M3. Solution #2: Hold Cmd+T, once you see the thunderbolt icon floating around on the screen, reboot. Happy World Emoji Day, July 17 everybody.

[@sbrave2]

2014 Mac Mini/Catalina. When I power on the Mac Mini and hold Cmd+T, I never see the Thunderbolt icon, just the normal Apple start up progress screen and then the password prompt as usual. Any ideas?

[@Misterioso62]

I have an imac with 10.6.8 and I can't get in recovery mode

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Can you provide me with a bit more information what happens when trying to enter recovery mode have you tried a different method of trying to enter into recovery mode?

[@Misterioso62]

@@RecoveritDataRecoverySoftware I read somewhere there isn't even a recovery mode in this version (only starting 10.7). I tried both command R and option R but the computer boots up just like I did not do anything. I also downloaded 10.7. but on installation it also requires the admin ID. Normally I should be able to upgrade to Capitan 10.11 if I had the administrator id. Tomorrow I will give it a try with my Windows keyboard.

[@mirzetzlatic]

Apple silicon: Shut down the Mac, then press and hold the power button until the Options button appears. Click Options, then Continue Intel processor: Restart the Mac, then immediately press and hold Command-R

[@HarryKend]

Thank you, it worked

[@tanishqtanu7735]

Hii.i m in pain dear...my macbook pro is not turning on ..fully charged shows..wht to do..plz help

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I'd recommend taking it to a professional or Apple as it might be an issue with the hardware of the device.

[@danniieva1310]

Macbook Air is sitting in recovery move. Spinning globe with internet connecting bar below. I log into the wife and the password is accepted but it just returns to the spinning globe with my internet name and the wifi symbol showing connected. Just sits like this. Doesn't have a loading bar, doesn't have any other options to press anything. HELP

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! First ensure your Wi-Fi connection is stable by switching networks or using Ethernet. Restart your Mac and retry Internet Recovery using Command + Option + R, or try Command + R for regular Recovery Mode. If that fails, reset the NVRAM/PRAM by holding Command + Option + P + R on startup, or attempt Safe Mode by holding Shift. As a last resort, create a bootable macOS installer on a USB drive using another Mac. If none of these work, visit an Apple Store for further assistance.

[@AmirokMukhit77]

Can not reinstall error can not download 403 error

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend making sure your internet connection is stable, trying a different network if necessary. Check Apple's system status to confirm their servers are operational. Resetting the NVRAM/PRAM (holding Option + Command + P + R during startup) can help resolve issues, as can changing DNS settings to Google's public DNS (8.8.8.8, 8.8.4.4) under Network Preferences. If reinstalling macOS, use Internet Recovery (Command + Option + R) to bypass local recovery images and download the latest version directly from Apple's servers. Ensure your disk is properly formatted as APFS or Mac OS Extended (Journaled) in Disk Utility, and temporarily disable any VPNs or firewall software that may interfere with the download.

[@AdamJuma-lg9nv]

i have an error code for internet recovery 2003f

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! This means its an issue with your connection make sure you're using a wired connection when trying to boot into recovery as well as try resetting your PRAM and NVRAM but shutting down your MAC and then turn it back on and hold down the Option+ command + P + R keys while starting up then release them when u hear the startup noise.

[@elizabethwykes9701]

Mine is stuck in recovery mode

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If your Mac is stuck in Recovery Mode, first check your Startup Disk by selecting it from the Apple menu and restarting. If that doesn't work, try restarting your Mac manually. You can also use Disk Utility to run First Aid on your startup disk, or if necessary, reinstall macOS from the Recovery Mode menu. Since you have a Bootcamp partition, ensure your Mac isn't defaulting to the Windows partition. You can also reset the NVRAM/PRAM by holding Option + Command + P + R during startup, or try booting in Safe Mode by holding the Shift key. If none of these steps resolve the issue, consider contacting Apple Support for further assistance.

[@cheze_bun]

I ONLY HAVE A WINDOWS LAPTOP WITH A MACBOOK AND I DONT HAVE ANOTHER MAC

[@sizzles48]

Only your first solution helped a bit but using the SMC start failed to get my old mac mini 2012 into Recovery mode. Then all your other solutions started with going into Recovery Mode which is the thing mine won't do. I'm trying to Factory Reset the mac to give it to someone else. It's currently running Catalina and was working fine until I tried to factory reset. It's completely frustrating. I feel as if I've run out of options.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Shut down your Mac Mini press and hold the power button until you see the “Loading startup options." Select a volume then press and hold the Shift key, then click Continue in Safe Mode and see if u can reset it that way.

[@davidclouthier3598]

I do not have a recovery mode on my Macbook Pro that ran El Capitan i erased the upper level HD and recovery section using disc utility by mistake. I have a flashing folder and every KZbin video and everything I know and even the Mac store cannot get an OS on this MacBook the apple store told me to go to Amazon buy a new hard drive and try again.. they stated my mac book is too old for them to offer support to. I am going to say right now that I do not think your video will help as none has so far. I have spent thousands of hours trying everything to no avail... do I have a paperweight or can you help... there is no internet recovery except a flashing folder there is no option command r there is no shift option command r there is nothing but a flashing folder... I can operate Chrome Flex on it from USB but it won't install on to hard drive as there is no HD to see i have tried external HD but nothing works and Chrome Flex won't install on an external it needs to see an internal HD and then I don't know if it will work.... I need help

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! IT sounds like it is unlikely that you'll be able to solve the issue if apple wasn't able to assist you have you tried resetting the NVRAM you can do this by turning off your Mac, then turn it on and immediately press and hold the Command, Option, P, and R keys for about 20 seconds. You may hear the startup sound or see the Apple logo more than once. Then release the keys and see if your Mac boots normally.

[@davidclouthier3598]

nope tried that but now something is happening after i put in the origianal set up discs that came with my late model 2009 macbook@@RecoveritDataRecoverySoftware

[@frankstanfa8257]

Safe mode

[@jaydinknight7360]

What do I do if my Mac is stuck in recovery mode

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Restart your Mac and see if it boots normally otherwise you can try resetting the SMC (System Management Controller) and the NVRAM (Non-Volatile Random Access Memory) which you can do by Shut down your Mac and wait for at least 10 seconds then press and hold the power button for about 10 seconds, until you see a startup disk or a loading indicator, release the power button and wait for your Mac to finish starting up. Then to reset the NVRAM shut down you Mac immediately press and hold the Option-Command-P-R keys together for about 20 seconds then release the keys and let your Mac start up.

[@AaronTate-c7z]

All did not work for me n I try on two macs

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend taking it to a professional then as its most likely a hardware related issue.

[@edwardmacnab354]

I will never buy an Apple product again . Overpriced garbage is what Apple products are . These guys have no idea what they are doing except for beveling and Cutesy Packaging. No wonder they have such a low Market share . I thought Microsoft was bad but this Apple garbage takes the cake .

[@paulsultana8683]

None of those works for me grrrr

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Can you provide me with some more information on your issue and I'll be happy to assist.

[@bishimixes9871]

Use time machine to restore back up. Do this by opening in recovery mode… WHICH IS WHAT ISN’T WORKING.!!!!

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! IF none of the steps mentioned in the video worked I would recommend taking it to Apple for further assistance as it might be a more serious hardware related issue.

[@autotunekilledthevideostar639]

Lol the whole video is about not being able to boot into recovery mode yet its your Method 3. Wow. There is a much easier way.

[@terrylim666]

Use Mac Internet recovery method to download a new Mac OS but after few mins it replied with an error downloading pl advice

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried all the steps in the video I would recommend shutting down your mac then turn it back on and hold down the following keys "Option + Command + P + R." Then hold them till you hear the startup chime twice and then release the keys and let your MAC reboot.