How to Bypass the BitLocker Recovery Screen in Windows 10/11 (2024 new)

Рет қаралды 57,149

Күн бұрын

Пікірлер: 66

@markvalente3523 Ай бұрын

great information I used this to help a gentleman living in a nursing home who has gone weeks with his laptop as such and nobody was able to help him, i talked him through this over the phone and it worked like a charm!

@busybird15 3 ай бұрын

manage-bde -unlock C: -rp recovery_key does not automatically disable BitLocker. You'd need to replace "recovery_key" with you actual recovery key.

@wahnsolo208 2 ай бұрын

Then the method he provided was pointless smh

@blgdinger3 Ай бұрын

Came here to say the second method is 10000% pure made up bullshit that wasn't tested at all

@Penelope-vi1vh 3 сағат бұрын

Hi when you say 'replace X with letter of encrypted drive , how do I know what letter that is? Thanks for your help. I suspect i've been hacked

@Penelope-vi1vh 3 сағат бұрын

Is it normal for the for keyboard to be disabled and replaced with a virtual onscreen one? Or does this indicate that i've been hacked?

@sofiastellaabitbol3658 21 күн бұрын

Thank you very much for this video. This is very complete and methodical. It has been two days I am losing my mind. Thank you so much. I will tell you if I succeeded to unlock my computer.

@sloopycat1954 7 күн бұрын

Lots of videos recommend manage-bde etc code to reveal bitlocker key but it rarely works I believe. Thankyou

@zeezee9884 4 күн бұрын

Hi ,i only see videos on how to bypass this problem but not how to solve it, i have the recovery key but whenever i turn my pc back on, it asks for the code again, how can i get rid of problem permanently

@RecoveritDataRecoverySoftware 3 күн бұрын

Hi there, thank you for your question! If BitLocker repeatedly asks for the recovery key, it indicates a configuration or hardware issue. Ensure TPM is enabled and functioning via tpm.msc, and enable it in BIOS/UEFI if necessary. Verify your boot configuration by enabling Secure Boot and resetting the bootloader using bcdboot C:\Windows /s C: /f UEFI, and check for disk errors with chkdsk /f /r. Temporarily suspend and resume BitLocker in the Control Panel or disable and re-enable it after updating your BIOS and drivers, especially for the chipset and storage. If hardware changes triggered the issue, reconfigure BitLocker.

@owo2610 Ай бұрын

two issues with the method of formatting the drive with command prompt: 1, you need to type in "diskpart" before doing it otherwise it just gives you an error, dont know why. 2, is that it?? like you just selected the volume. is there something im missing?? what do i do after selecting the volume?

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! After selecting, format the drive with "format fs=ntfs quick" for a quick format or "format fs=ntfs" for a full format.

@owo2610 Ай бұрын

@@RecoveritDataRecoverySoftware Thank you. I fixed the problem yesterday but I appreciate the help :)

11 күн бұрын

@@owo2610 May I ask how did you fixed?

@hansaleee1678 2 ай бұрын

I got the recovery key.. But after I enter it and hits the continue button it’s showing diagnosing device.. Then leading to Automatic Repair blue screen… Please help me…

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! First make sure you're entering the 48-digit recovery key correctly, checking for typos and extra spaces. If you're unsure about the key, retrieve it from your Microsoft account or any recovery methods you set up, like a USB drive or printed document. After entering the key, wait for the "diagnosing device" process to finish; if it continues to loop, force your laptop into the Windows Recovery Environment by shutting it down three times during boot and select Troubleshoot > Advanced Options. From there, try Startup Repair or System Restore, and if necessary, use Command Prompt to run repair commands for the boot configuration. If none of these options work, consider resetting your PC while choosing to keep your files or remove everything..

@anasabdinaasir8867 Ай бұрын

Hey man none of these cmd prompts worked in my cmd they always say "Bitlocker Drive Encryption : Configuration Tool Version 10.0.22000''

@Name001-fg4bo Ай бұрын

hello I have a question I just reinstalled my laptop and this happened my Disk D just locked, will factory reset open it?

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! Unfortunately no it will not.

@Name001-fg4bo Ай бұрын

@RecoveritDataRecoverySoftware ok thx, I just opened it but by formatting the locked disk, I have tried everything only that last solution worked 😕

@acid_rsa 2 ай бұрын

How do you know your encrypted drive

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! Open the Control Panel, go to System and Security > BitLocker Drive Encryption, and look at the list of drives to see if BitLocker is on or off for each one. Alternatively, you can use Command Prompt by running it as an administrator and typing manage-bde -status to view the BitLocker status and encryption details of each drive.

@markvalente3523 Ай бұрын

usually the encrypted drive is C: unless you're running with multiple partitions

@michaelmagone9672 Ай бұрын

After running Manage-bde command, Error: The password failed to unlock drive C: How can recovery_key somehow get around a secure password??

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! BitLocker includes a fallback mechanism via a unique 48-digit recovery key that bypasses the password to unlock the drive. This key is independent of the password and can be found in your Microsoft account, on a USB drive, or as a printed or saved file. Use the recovery key with manage-bde -unlock C: -RecoveryPassword to regain access.

@h095shreyamukherjee8 2 ай бұрын

i have clicked on skip this drive one time at first and once more in 2nd screen page. and laptop restarted . i didnt knew anything so i skipped

@pymcat 4 күн бұрын

Inever installed bitlocker and now so had no key aand now comp is useless wont let me repair my reset.nocommand prompt offered.this sucks im 80😊

@RecoveritDataRecoverySoftware 3 күн бұрын

Hi there, thank you for your question! Then I would recommend taking it to a professional for further assistance.

@melonnation473 3 ай бұрын

huh? I’m really confused on what I have to do on method 2, I tried it but I got an error? please help me out I have exams this week

@busybird15 3 ай бұрын

@@melonnation473 Hey see my comment above. If you don't have your BitLocker key you have to find it or you're out of luck and you'd need to factory reset.

@melonnation473 3 ай бұрын

@@busybird15 I have done that but I still got an error

@RecoveritDataRecoverySoftware 3 ай бұрын

Hi there, thank you for your question! What is the error code you receive?

@busybird15 3 ай бұрын

@@melonnation473 Check the drive label. C: may be fine and "D:" or some other letter may be the one locked.

@noorp336 Ай бұрын

What is this “drive letter”? Where do I find this now?

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! If you go into windows file explorer then by this PC you should see your local disk which will have the drive letter in ().

@the4foxsden 7 күн бұрын

How do you get into your computer to check this with the bit locker screen on start up?

@anasabdinaasir8867 Ай бұрын

So what is the problem

@freedomfreetime6086 2 ай бұрын

C:\Windows\system32>manage-bde -unlock F: -rp recovery_key BitLocker Drive Encryption: Configuration Tool version 10.0.19041 Copyright (C) 2013 Microsoft Corporation. All rights reserved. ERROR: The password failed to unlock volume F:.

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! First ensure the recovery key is correct and try each key if you have multiple ones. Confirm that you're running Command Prompt as an administrator, and double-check that F: is the correct drive letter for the encrypted drive. You can also try unlocking it through the GUI by going to Control Panel > BitLocker Drive Encryption and entering the key manually. Verify there are no typos in the 48-digit recovery key, and if the issue persists, try unlocking the drive on a different Windows PC to bypass any local configuration issues.

@BiggestE_ 2 ай бұрын

Is there anyway I can use command prompt to get my recovery key?

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! You can try typing manage-bde -protectors -get (yourdrive): then press enter, this will display the BitLocker status along with the recovery key ID and, in some cases, the recovery key itself.

@BiggestE_ 2 ай бұрын

@RecoveritDataRecoverySoftware Thank you for trying to help it unfortunately didn't come up however

@mihaipavel8660 2 ай бұрын

Hello! I bought from the Fleamarket one Microsoft Surface 4 pro tablet with the broken display. When I start it on the lower part of the screen I see BitLocker word, it`s a single part of display which show something. if I connect an external display on the display port, this didn`t show anything. I wish to use the tablet as desktop PC with external monitor. Can you help me with any advice? Thank you!

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! Since you're seeing the BitLocker screen, you'll need the BitLocker recovery key to unlock it, which may be stored in your Microsoft account or on a USB drive.

@mihaipavel8660 2 ай бұрын

@@RecoveritDataRecoverySoftware Thanks for the reply, but like I said, the tablet wasn't mine, I bought it at the flea market, mostly for original keyboard, but with a broken display. I don't know the previous owner. Thank you.

@jameskeough4620 2 ай бұрын

Don't have a "skip" option. Stuck. BTW, .75 video speed is about right! (-:

@anasabdinaasir8867 Ай бұрын

For further info man in your video u can access your computer but me I cant even bypass this blue recovery screen shit so wth u talking about we are not even in the same shoes

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! I would recommend trying to create a bootable USB drive with windows so that you can enter your pc and perform some further troubleshooting on the device.

@innovalegal7230 21 күн бұрын

3:28 fake information. Inaccurate. False.

@Knoww_cricket 2 ай бұрын

After typing key also not opening

@BRC332 2 ай бұрын

21st vid. Won’t work

@BeyondaTrip Ай бұрын

Doesn’t work, says password failed to unlock volume C

@RecoveritDataRecoverySoftware Ай бұрын

Hi there, thank you for your question! I would recommend taking it to a professional for further assistance if you tried all the steps mentioned in the video.

@saasocgl2024-bw4bi 2 ай бұрын

How to get recovery key by command prompt

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! Open Command Prompt as an administrator by pressing Win + R, typing cmd, and pressing Ctrl + Shift + Enter. Then, type manage-bde -protectors -get (your drive letter): and press Enter. The 48-digit recovery key should appear next to "Numerical Password." If the drive is an external one, connect it to another computer and run the same command. Alternatively, if your device is linked to a Microsoft account, you can check for recovery keys by signing into Microsoft’s recovery key page.

@joanacaldeira155 3 ай бұрын

What if I cannot pass the blue screen?

@RecoveritDataRecoverySoftware 3 ай бұрын

Hi there, thank you for your question! I would recommend trying to create a bootable USB drive and try running you computer from the USB drive and try running a chkdsk scan from the USB drive.

@BRC332 2 ай бұрын

5:27. LIAR Did what you said. Cmd said it was successful. Restarted. And guess what.. blue screen…

@RecoveritDataRecoverySoftware 2 ай бұрын

Hi there, thank you for your question! I'm sorry to hear none of the steps helped, I would recommend taking it to a professional for further assistance then.

@crangus7931 8 күн бұрын

Another video that doesn’t work. One of the solutions literally requires you to be logged into Windows 😱 What is the point of making these videos. Clickbait nonsense that just wastes people’s time. Get a grip!