Рет қаралды 1,728
My very first fired glaze kiln in my brand new Skutt 818!
Watch me open and unload the pieces in the kiln and I'll tell you which glazes I used and how i applied them. I fired by the controller to Medium Speed Cone 6 with a 5 minute hold and a natural cool but it reached a cone 7 by the actual Orton cones.
The trees are slipcast in local Georgies G-mix slip, using vintage plaster molds of trees that i purchased on eBay.
There are so many glazes out there, so many combinations! I learned a lot about glazes from researching online and reading books. I hope this video inspires you to try some new combinations of these commercially made glazes.
I get two combos incorrect during the video, but correct everything in the last part and show a few of them again, so watch all the way to the end.
Stay Crafty,
Amanda