UNBOXING THE KONG 2650 LSA SUPERCHARGER | ZL1 MONTE CARLO UPDATE

[@421ssrida]

4863 were the LSA heads. And 1771 were the LS9 heads. Both are a good choice to put on a stock block. The Kong version of the 2650 is definitely worth the money. Its a good max effort blower. But it can't touch the 1st version of the Magnuson 2650. That thing is a monster!!! 1000HP is easy to gain with the Kong 2650. You can gain that on lower boost without spinning the blower hard. Because the rotors are bigger. ID 1300 injectors, dual fuel pumps, dual keyway crank, 9.17 lower pulley, dsx idler bracket and pulley are some other items that will help you get there. But with 1000 WHP I hope you are upgrading to a 9 inch rear-end with 35 spline or more axles. And beefed up suspension parts. And also a 4l80 that can handle that kind of pwr. Hell solid motor mounts would be better also. Have fun but be careful once you get in the seat with that kind of power!!!

[@RedAndBlackCollection]

Wow! Thank you so much for the technical tips and advice. I’ll be sure to consider all of that. We are going with a 4L80 with a 9 inch rear end, and also upgrading the suspension to a stage 3 QA1 handling kit. I’m taking notes and will take a look at all the stuff you listed as well. Thanks 🙏🏽

[@RedAndBlackCollection]

Bro I just realized I misspoke in my video.. I said that we using "4823" heads.. WRONG! I don't know what I was thinking about, but anyways, we are using the 4863 heads ported and polished. I actually did a side by side comparison video with my 4863s and some stock LS3 heads a while back ====>> kzbin.info/www/bejne/oZOtiahrfLljpJo

[@mrhitthat13]

Im in the same boat. I have a 85 ss doin a lsx427 with kong…..be sure to brace the 4 link corners if the frame isn’t already boxed and braced up. 600+ can rip the 4 link ears right off the frame

[@RedAndBlackCollection]

@@mrhitthat13 thx for the advice on the frame. I'm dropping the car off next week to do some frame upgrades and suspension mods. holy cow! A 427 with a Kong! That's going to be a MONSTER!

[@mrhitthat13]

@@RedAndBlackCollection kzbin.info/www/bejne/ioLcZGqQbL53l7s at 14:00 minutes in ….the closes video i can find on the bracing without removing the body…….did a lsa 6.0 in my 82 Dually but wanted to make the monte stupid wild

[@LivingMyBestLife956]

DUDE!!! I'm so happy for you!!!!!

[@RedAndBlackCollection]

Thx bro! Much appreciated!

[@LivingMyBestLife956]

@@RedAndBlackCollection We Texans know how to make HP.

[@ralph00611]

Brother, i could by that bigg smile your day was going to be great , you going to unlease the real beast

[@RedAndBlackCollection]

Thanks brother… yea I was like a kid in a candy store. I’m hoping she will put up some respectable numbers once we get it all together

[@moe4772]

Appreciate you going into so much detail man! Did you get it installed and running yet?

[@RedAndBlackCollection]

Thx man, I appreciate the compliment. Haven’t installed it yet. We ran into supply chain issues with our rotating assembly. Set us back about 6 months. I posted an update video not too long ago. Check it out kzbin.info/www/bejne/gWnOaqGveL2JpK8

[@OZZYxcon_GTSR1000hp]

Love the video mate I’m putting the kong2650 on a DART427 HERE in Australia hopefully should be done at the end of this month 💪💪

[@RedAndBlackCollection]

Thanks for watching! I appreciate the support all the way from down under! Good luck with your build!

[@OZZYxcon_GTSR1000hp]

@@RedAndBlackCollection thanks mate and I’m definitely keen to get the car back and see what numbers it makes then get it to the drag Strip

[@421ssrida]

@ozzy why not go harrop?

[@OZZYxcon_GTSR1000hp]

@@421ssrida the Harrop 2650 wasn’t out when I got my KONG but my kong2650 will have the Harrop LSA lid on it 👌

[@RedAndBlackCollection]

@@OZZYxcon_GTSR1000hp can’t wait to see what kind of numbers she does.. I subscribed to your channel.

[@realshidd3062]

Definitely worth the money 💯%

[@RedAndBlackCollection]

Yessir… I think so too bro 💪🏽💯

[@nicklocc2270]

Keep playing Los. She aint gone be street legal anymore😁🤣😂💯💯🔥🔥

[@RedAndBlackCollection]

@@nicklocc2270 lmao 🤣 I know right! I actually wouldn’t mind it though.. I’ll just trailer it from show to show! 😎

[@RedAndBlackCollection]

@@nicklocc2270 what’s even funnier is I’m not even sure I’ll be able to handle all that power.. would be embracing to build a car so fast you’re afraid to drive it.. Smh 🤦‍♂️

[@nicklocc2270]

@@RedAndBlackCollection All 3 imo been show worthy! But yea you got some killas bro. C10 tough too.

[@jameswessel42]

Did you install the billet lid or oem lid ?

[@RedAndBlackCollection]

Haven’t installed it yet, but I’m going to use an upgraded OEM lid from LSX Concepts… I can’t justify the cost of the billet lid right now, but I might upgrade later.

[@jameswessel42]

2800 is alot of bread to justify...seen it has meth injection ports on it if your planning to add down the road and....looks awesome and sure it preforms just as well...great video BTW

[@RedAndBlackCollection]

@@jameswessel42 thx man! Much appreciated ✊🏽

[@Johnboston-mr9tk]

Ticket on that blower alone?

[@RedAndBlackCollection]

$5800

[@1KhaliDP]

@@RedAndBlackCollection link me to where you brought it?

[@RedAndBlackCollection]

@@1KhaliDP name if the company is Kong Performance. You can find them online.

[@mikemichael4960]

✊🏿

[@realshidd3062]

408 stroker 😱😱😱😱🔥🔥🔥🔥👊🏾💪🏾👊🏾💪🏾 coming for test ride

[@RedAndBlackCollection]

C’mon! I’ll take you around the block!

[@eprohoda]

amigo, how greeat -

[@RedAndBlackCollection]

Thx 🙏🏽

[@realshidd3062]

Bro you better stop posting these videos 🤦🏾‍♂️ you going to make me brake my wallet 😂😂👊🏾💪🏾🔥🔥🔥 I swear we have same taste

[@RedAndBlackCollection]

Lol.. already bro. Great minds think alike!

[@J.Lyons1998]

Smh 🤦🏿‍♂️

[@RedAndBlackCollection]

Lol… what bro?

[@J.Lyons1998]

@@RedAndBlackCollection man tha way yo face lit up seein that package

[@RedAndBlackCollection]

@@J.Lyons1998 man bro.. it was like waking up to a tree full of presents under it on xmas day! 🤩

[@J.Lyons1998]

@@RedAndBlackCollection lol I saw it u was like a kid in that candy store