Redd’s ProCharger LS3 El Camino Hits the Dyno! | StreetCar HQTV | S1 E10

Today we dyno’d Redd’s 1984 Chevy El Camino. It has a 6.2L with our custom cam package, stock LS3 heads, a D1sc ProCharger on low boost with a Holley Hi-Ram Intake. Very conservative tune on pump gas and a 4.25” upper it made pretty good power putting especially considering the 24” Billet Specialties on it. Also has a custom built 4L80e by Carl at High Performance Transmissions, and a Moser M9 rear end. Now since the owner of the car plans on racing it in the future, we had to hide actual numbers once we started to lean on the motor a little bit as well as when we turned the boost up but if Redd changes his mind then we will post the rest of the footage with actual power numbers.
Thanks for watching and stay tuned for next week’s episode of Street Car HQTV!
👉 Don’t forget to Subscribe! 👈
Looking for a setup like this for your G-body??? A-Body?? Or whatever then hit us up!!
Email us for quotes on builds at [e-mail]
We specialize in custom LS and Gen V LT swaps. EFI only!!! Cam swaps, complete engine builds with forged internals, accessory drives, fuel systems, Turbo/ProCharger piping and fab work. Yes we are officially fabricating turbo kits in 2021!!! This is huge for us!! Give us a call to get on the schedule now or to discuss your build for 2021! We’re currently accepting full builds for late July and early August! Appointments are going fast!
We sell AND install QA1 Suspension products, Wilwood Brakes, Holley Sniper EFI, Holley Terminator EFI, MSD, Dakota Digital, Texas Speed, Diamond Pistons, Circle D Converters. We also build turbo kits, ProCharger cold sides, custom intercoolers, and also our custom #INHOUSE line of sumped gas tanks, #STREETTANKS!
Email us at: [e-mail]
Located at:
1753 E. North St.
Crown Point, IN
46307
219-794-5279
Our social media pages:
‪
‪Check us out on Facebook! ‬
‪ / ‬
Follow me on Instagram:
‪ / streetcar_headquarters‬
‪
Family owned!
#LSswaps #StreetCarHeadquarters

[@scottrader2032]

I love El Caminos! They are the mullets of cars! Business in front party on back! I haven’t seen a mullet with that kind of power since Randy Johnson! Vroom Vroom!

[@StreetCarHeadquarters]

We out here!

[@bryanatkins317]

I seen this car a few times on the street definitely a nice looking car!

[@AR-qh6nx]

That’s the PPP El Camino lmao I heard buddy put all that PPP Bread in that MF 🤣

[@Torrious]

Love it, I wanna see the old guys crying saying it needs some 15 inch torque thrusts or cragars lmao

[@seabcopeland2228]

Love the whip beautiful car bro I have an 83 with a LS 6.2

[@infamousnova]

Oh you got some heat 🔥

[@ghostdoggvids7207]

That whip is wicked. Nice clean work.

[@StreetCarHeadquarters]

Thank you! We appreciate it! He loves driving it.. 🏎

[@ghostdoggvids7207]

@@StreetCarHeadquarters wish I was near your shop. I'm actually doing a ls swap on my 87 cutlass salon. Nobody in my town doing them.

[@StreetCarHeadquarters]

@@ghostdoggvids7207 Could always have it shipped to us

[@SteveDavisCarGuy]

Nice facility 💪🏾

[@SteveDavisCarGuy]

That car nice af 🔥🔥

[@seabcopeland2228]

Nasty Daaaaaaaaam

[@tonywalker2334]

Gotta know rim size and was rear end cut down to make it work???? Yes I absolutely subscribe.

[@wesleytutterow9428]

Wooooosh!

[@StreetCarHeadquarters]

#iykyk Woooosh!

[@mr.g9756]

Nice!!!

[@shawnholmon24]

Good video homie 💪🏼🔥

[@StreetCarHeadquarters]

Thank you!! We enjoy what we do!

[@Up_on_em]

🔥🔥🔥

[@mr84ttop34]

Beautiful ride! New subscriber!

[@StreetCarHeadquarters]

Thanks for the sub!

[@mr84ttop34]

@@StreetCarHeadquarters No problem!

[@donteblack7294]

👍🏾👊🏽🔥🔥🔥🔥🔥🔥

[@elcodreamin5280]

🤤

[@rackbar17]

What color brown is that? I need that for my 2 door Tahoe!

[@Ne0WiNd]

What size tires/rims were you able to place on that g-body? Did you have to notch the frame?

[@StreetCarHeadquarters]

This one has a set of 24s on it.

[@user-ep3ti6hc1l]

where did he get the front chrome fender trim

[@KAUGHTINDAGRUVENT]

Nice Car Bro

[@JCL404]

What throttle cable did y’all use I got exactly same setup but need throttle cable

[@Ohh3984]

How can I get in touch with you about some motor work?

[@StreetCarHeadquarters]

Give us a call on Monday. My assistant can set you up an appointment to come in and tour the shop and discuss your build or we can discuss over the phone. [phone]. M-F 8:30am-5:30pm cst

[@billyjohnson1401]

Thts bad to tha bone no lie

[@duckinb1104]

Who did the exhaust on el

[@StreetCarHeadquarters]

We did!

[@vernonchaney65]

Does this car have a/c?

[@StreetCarHeadquarters]

This one doesn’t yet but we’ve done others with a/c. Check out the car in today’s upload.

[@Buddhabaggz]

What color ???

[@a1965hah]

Tell your dyno guy not to use the cars brakes to slow the tires down after a dyno pull

[@StreetCarHeadquarters]

Before we got our own hub dyno, we operated that dyno successfully since 2010 with ZERO incidents but thanks for your concern

[@a1965hah]

@@StreetCarHeadquarters cool,I say it because using the brakes to slow the dyno down will put excessive wear and heat to the brakes,kinda like slowing a heavy trailer down using a small car