CFMOTO Melted 40A Fuse Repair

Рет қаралды 3,776

R.N.G Performance

Күн бұрын

Пікірлер: 32

@rickmillford 10 күн бұрын

I did this update on my brand new 2025 it was simple and well worth the money and now piece of mind thank you RNG

@R.N.GPerformance 10 күн бұрын

Your very welcome 🙏

@marknoon3031 Ай бұрын

I did the same thing and few month ago on my '24 Uforce XL and it has worked great since. Mine had melted like you showed and my dealer sent me the CFMoto notice of the defect. I took it a step further and relocated the MIDI fuse block under the rear seat in the bay the ECU is located and coated the wire inserts with dielectric grease for safe measure. I also added a second battery for all of my accessories (front and back light bars, 32" sound bar, 12 rock lights, and whips) and it fits in the slot under the ECU. Hooked it up with an isolator, separate relay fuse blocks. Love this easy setup to add accessories without heavily modifying or overloading the stock system. Also added the turn signal kit with the steering column lever.

@MrPster Ай бұрын

Love your videos, thanks. You do make the best CFMoto hands on videos on the net ! You are definitely appreciated

@R.N.GPerformance Ай бұрын

Thank you 🙏

@canadianproud3864 25 күн бұрын

I had one melt on my cforce 1000. I put in a 40A car maxi fuse in it. Never had an issue after.

@903environment Ай бұрын

Thanks for the video,I've had 2 melt downs on my zforce 2021 950, have a question? CAN U UPGRADE THE STATOR-N- THE VOLTAGE REGULATOR, OR WAT ABOUT JUST THE VOLTAGE REGULATOR BY ITSELF FOR MORE AMPERAGE, BECAUSE I HAVE A TON OF MUSIC ON THIS MACHINE

@R.N.GPerformance Ай бұрын

There really isn’t any upgrades available. I’ve personally not had an issue with their output but you definitely need 2 batteries.

@903environment Ай бұрын

Ok thanks,n by the way, them folks r real haters over there,I would shock their organization,but ain't gonna put them out there,to start something, but stay up n keep doing wat u do,cuz u always been helpful to us

Ай бұрын

Should this be a concern if you aren't running any additional lights and are looking at a stock machine? Or is it mainly if you are adding accessories that you should consider upgrading the fuse?

@R.N.GPerformance Ай бұрын

This is a huge concern. This is happening to stock units with no accessories. For instance on my turbo the only thing that runs is the engine and fuel pump. I have no accessories.

Ай бұрын

@ thank you for the response! Keep up the awesome work and thank you for the info!

@ronhinds6257 Ай бұрын

Sir would this apply to the 2024 ZForce 950 Sport 4? Only asking because you said ZForce also. If so were would I find this fuse I know there is a couple of 40 amp fuses in the fuse box, but this doesn't look like were you are referring to.

@R.N.GPerformance Ай бұрын

They should be located by the battery. I haven’t looked at that model yet to see but it’s on my to do list.

@rflight7678 Ай бұрын

Where would i find these fuses on my 22 Zforce Trail 800 ? Thanks

@R.N.GPerformance Ай бұрын

Back by the. Battery

@R.N.GPerformance Ай бұрын

Under the driver seat

@rflight7678 Ай бұрын

Awesome man , thanks again I have to have a look at these.

@rcclassiccrawlers4368 26 күн бұрын

I don’t believe mine has melted, but I’ll probably replace it after seeing this video for a little preventative maintenance and expense.

@R.N.GPerformance 26 күн бұрын

Most definitely. Better to fix it before it happens for sure. 👍

@supermaga5351 Ай бұрын

What does that fuse connect too?

@R.N.GPerformance Ай бұрын

I explain in the video

@gillesbrassard7826 Ай бұрын

The wire seems small for a 40 amp fuse.

@R.N.GPerformance Ай бұрын

Exactly. Thats why we don’t want to over do it.

@BIGHAMZA Ай бұрын

First. Keep 'em coming

@R.N.GPerformance Ай бұрын

Thank you 🙏

@LilPaul-ow9me Ай бұрын

Mine did it with the 40 the dealer said it was supposed to be 30. They lied ! It cost them 2650.00 ! After I sued them. My machine was under warranty. They tried to deny my warranty. It did not work ! Customer service is gone !!

@R.N.GPerformance Ай бұрын

Amen my friend. I’m sorry to hear that. Glad you stood up for what’s right. Thank you 🙏

@AaronAube-ek4nt Ай бұрын

How are people still thinking this brand is going to last like the name brand machines. No brand is perfect but melted fuses and undersized wires from factory, people deserve better for their hard earned money!