⚡ Reduce The Ring In Your Ciro Drink Holder! Genius!⚡

Ciro Big Ass Drink Holder - shrsl.com/4ma1p
Ciro Standard Drink Holder - shrsl.com/4ma1q
Big Ass Reducer - shrsl.com/4ma1r
Standard reducer - shrsl.com/4ma1o
Offset Perch Mount - shrsl.com/4ma1t
Handlebar Mount - shrsl.com/4ma1x
Universal Mount - shrsl.com/4ma21
In this video, Steve demonstrates the installation of the Ciro3D drink holder and reducer ring on a Harley Touring motorcycle. Watch as he expertly attaches the drink holder, showcasing how the innovative reducer ring ensures a snug fit for various cup sizes, preventing spills on the go. This clever addition by Ciro3D enhances the convenience and functionality of the drink holder, making it a must-have accessory for any rider.
Steve's Favorite Motorcycle Must-Have Tools!
Master Hex/Torx Set - amzn.to/43imOAg
Milwaukee M12 Ratchet -amzn.to/4agkA6i
Milwaukee M12 4.0 Battery - amzn.to/3UR0b3k
Swivel Head Ratchet - amzn.to/3MYeMEw
Tire Tread Depth checker - amzn.to/4btuq5R
Reversible Wrenches Metric - amzn.to/4beZbfm
Reversible Wrenches SAE - amzn.to/4aaB7sy
36 pc SAE & Metric Hex/Torx Key Set - amzn.to/44vI5qR
Blue Medium Loctite (Your Bike's Best Friend) - amzn.to/3gwdK6p
Lexivon IN LB Torque Wrench - amzn.to/3ws6K2Y
Lexivon FT LB Torque Wrench - amzn.to/4bqg5Hm
Motorcycle Funnel Set - amzn.to/3sP9HFz
Low Profile Oil Pan - amzn.to/3WvNV9G
Belt Tension Gauge - amzn.to/3FiiXco
Hexagon LED Ceiling Lighting - amzn.to/48rwtp7
6" precision Cutters - amzn.to/4b3Wop0
Spark plug Boot Pliers - amzn.to/3y7SHAe
Pliers Organizer Racks - amzn.to/4dwkJFC
60 pc Master Tap and Die Set - amzn.to/3UshTJ4
Aplus Motorcycle Lift - amzn.to/3QBqSGM
Orion Motorcycle Scissor Lift - amzn.to/3URsLBL
Funnel King Capped Funnel - amzn.to/3URsXRv
Orion Wheel Bearing Puller/Installer - amzn.to/3QB1AbM
Battery Tender Junior Lead Acid/Lithium Charger - amzn.to/4bqX4of
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicso...
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.

[@sikbaggers]

⚡Thank you so much for watching our video on "Reduce The Ring In Your Ciro Drink Holder!" We appreciate your support and hope you found the tips helpful. If you enjoyed the video, please give it a thumbs up, subscribe to our channel, and don't forget to tell your friends about us. Your support helps us keep creating great content. Thanks again!

[@duff8402]

I love MOST of Ciro's products, but I've gone through two of their ball mounts now. They just don't hold. A few good bumps or train track crossings and it eats off all the gritty texture on the ball. Now every little bump you hit, the cup holder tilts all the way down and spills whatever you're drinking all over your tank

[@sikbaggers]

im sorry to hear you had that issue....ill see it goes with mine...i did tighten mine down with some adjustable pliers...a little more grip than I could get with my hands.

[@dynamicangel7472]

Best Videos on the YT!

[@sikbaggers]

thank you so much!

[@ryanm8456]

Always a good idea when you doing the initial fit to ensure that you are not obstructing your handle bars from being turned or the cup holder hitting on anything that would cause you to not be able to fully turn the handle bars.

[@sikbaggers]

Yes sir..something I forgot to mention.

[@qthebikeahaulic]

I have had the bigazz cupholder now for almost 4 years/ over 70k miles, same with the wired phone mount. Was on my 2018 Ultra- now on my 2022 Ultra Limited/Apex paint bike. Here is my review. Wired phone mount- I put mine on the right perch. Fantastic, I love the thing. Charges my phone from 5% to 100% in 30 minutes or so. Yea it's pricey but after running a cigarette plug in adapter with a wire to a cheaper mount that barely works its night and day difference. Bigazz cup holder- Installed on left side perch. Buy the perch extender BEFORE you put it on the left side perch, or it will/ guaranteed / absolutely hit the gas door and scuff the ever-living fuck out of it. Worked nightshift rotation of 7 12hr shifts and never noticed it until I flipped back to dayshift/ normal sleep mode. It was and still is scuffed up- about a quarter sized area almost down to primer. Cup holder works great though. I will look to buy the insert now. The insert looks like it will solve the issue of using standard cups in it. I took a can koozie and cut a 2 to 3" strip/ top to bottom and just put that in when I use my cup. I also put my gloves in it when getting gas- keeps from dropping them on the ground or getting blown off the seat in the wind. Big sized Yetty cup- Paid 36$ for it, put coffee in it, rode to work and it was splashed all over me and the bike. The sliding part doesn't seal well enough even after trying to smooth out the mating areas. I made it way better, but the vibrations of the bike just splash it all over still. Guys at work have them and all of them have the same issue. I now only use it in my garage. Solution is to find a cup with a lid that has a plug style that you push in for the hole. Hope that helps someone.

[@sikbaggers]

I like the idea of the inserts just because they are so easy to put in and pull out if you want..I think it will help with your issue

[@rodneyhanbaum697]

I see them hand guards! waiting on those side stretch flare guards and new style bag lights for mine.!! oh, and since we got same model and color, maybe they could start sending you stuff in pairs😂😂😂😂 seriously let me know when the lights and stretched flares are available! Great job!

[@sikbaggers]

LOL Ill try! Ill have the older style bags, dominator fender and stretched side covers in a few days....Ill convert it out..it actually looks really good on the new bikes.

[@northbysoutheast5439]

I’m not a cup holder type of guy, but others may can use the info. 😎👍🇺🇸

[@sikbaggers]

yeah im usually not either...i dont like alot of stuff on my hyandlbars but I gave it shot on a few long rides...was handy...thanks for watching!

[@JohnM-ee6kj]

I use to make fun of the guys that had these on there bikes. Then I got one as a gift and LOVE it. lol

[@sikbaggers]

Ive never ran one til now and yeah its pretty handy...I always thought it looked so big on the handlebars but I got over it lol

[@CurtisAllenG]

Neat idea.. I just rinse out my cup and pour whatever drink I purchased into it.. Additional cost = $0 😀

[@sikbaggers]

yep...thats one way to do it lol

[@u.s.aarchangelforgod3679]

TY Steve 💯

[@sikbaggers]

thank you for watching!!

[@rodneyhanbaum697]

Nice work Brother!

[@sikbaggers]

thank you sir!

[@davidhelton9007]

I’ll get ya my Goldwing!

[@sikbaggers]

hell I just want to ride it at this point haha

[@davidhelton9007]

@@sikbaggers absolutely! I’ll bring it out !

[@Axeman12171]

THANKS still waiting on you to move to florida lol

[@sikbaggers]

hahah shoot, me too!

[@mikemurphy6490]

I've got a cup holder for myself and for my wife and neither one holds I'm constantly have to adjust mine cause it tips clear down spilling all over my bike their cup holders are junk

[@KeithDaleHankinsSr]

I have the same problem. I just can't get it tight enough to pull my drink out without the holder twisting on the ball.

[@sikbaggers]

man im sorry to hear that...did you reach out to get a replacement?

[@aarongelvin4092]

Hi Steve I bought a set of heat and air Deflectors from advanblack and the problem I'm having is the holes in the frame is a little bit to big any idea on how to get them to work?

[@sikbaggers]

there should be a pack of hardware in there...the top one will be a speed nut and the bottom one will be a nut insert that goes into a hole.

[@aarongelvin4092]

@sikbaggers the brass little fittings when you put them in the hole and tight up the bolt as soon as it bottoms out it just spins in the hole and destroys the fitting and it's no good. I've tryed Harleys fitting and they do the same thing so as of now I can't install my heat Deflectors

[@Athrottleholic]

👍🏻

[@sikbaggers]

Thank you for checking it out!

[@Athrottleholic]

@@sikbaggers yes sir, your welcome!