Reducing Minibike Vibrations

[@HowToLou]

If you like this, please check out my other Minibike Videos: kzbin.info/aero/PLi2AZ1lgeRjE0rw80B_1GP0GlH6LGxbbR

[@julestrdprodjimavicpro2869]

rubber washers on everything made a huge difference for my trailmaster and vibration!

[@MountainEagle77]

Wow, this is awesome. I had no idea you had mini bike tutorials! Subscribed!

[@teshuvahemmet3036]

Thanks for the information 👍

[@MikeBeatzcom]

I can see the difference... Thanks for the video!

[@miguelpagansr6128]

Im in the process of buying a mega moto 212 pro and I bought a set of Briggs and Stratton engine mounts. Not only they keep vibration down but also keep the crankcase cool as you’re riding and they’re about 1/2 inch tall. Thanks for the info as always, ride safe out there.

[@buffalojones341]

I just bought some rubber plumbing fittings to put down. I hadn’t thought of the top side vibration. Thanks!

[@radpaul2574]

Good and worked well thank you!

[@israelduffy9140]

Got a 274cc engine for my Coleman and at half throttle the engine clanks and shakes, is that from the governor slowing now the engine or do I have a carburetor problem

[@seatime674]

Hello will this work on motocross dirtbikes too? I have an '05 WR450 and 10 miles on the street my butt is numb from seat vibration but handlebars are fine😮

[@HowToLou]

It should yes

[@tslaughter8088]

I tried this on my bt200x and the motor keeps coming loose and then chain falls off no matter how tight i wrench it. This happen to you?

[@parker7888]

Try nylock nuts

[@moparlifene]

Seems like a great idea then seeing this comment i wouldnt be suprised if the whole engine slides and chain will fall off from rubber washers slipping

[@benbekemeier5545]

What did the rubber washers do for the amplitude? That is the important measurement here.

[@Odin31b]

Thanks for the info!!

[@tmilker]

Just curious: What's the vibration on the other bike with the more balanced crank?

[@HowToLou]

Great question! I came back out to the shop and just ran the test. The “smooth” bike was only vibrating at about 7Hz, very close to the one I modified.

[@kevingoon2747]

Are these two different sizes one looks bigger .

[@azlandpilotcar4450]

Good tip! Maybe someone could also use a third washer between the bolt head and the bottom of the plate?

[@HowToLou]

Technically, we have blocked all possible transmission paths, but it couldn’t hurt. That would be similar to doubling the top washer. Doubling both top and bottom washers might actually help.

[@marukqs]

The amplitude of vibration is measured in db, not in Hz. Hz is a frequency of vibration. So your accent is on count of vibrations per second, but not an amplitude.

[@Odin31b]

Give me your lunch money, 🤓! Jk , good point

[@SeniorIzzy]

49CC engine?

[@HowToLou]

Just a sticker 😁. 196cc