Reefs RC Servo Tuning

[@whitsrcleftovers2707]

Lot of nice features, and even nicer of you to break it all down for us. I'm already a fan of the soft start. Especially with a servo putting out over a thousand ounces.

[@lordharr123456]

Love the information! Just got my 777 going to install it in my 1/8 scale 4wd buggy.

[@Ang3lOfD3ath]

Thanks for making this video was curious about how the software worked

[@yiarkungfu]

It seems like the Radiolink RC6GS transmitter can do something similar to all of the tuning for the servo. However the 777 servo saver feature is pretty cool.

[@tomlucasrccrawlers9108]

Ahhhh!...that's Reef's big reveal. Nice work on the video. Reef is always pushing to stay at the head of the curve.

[@scalecoastheroes]

Thanks for the video Exo!

[@jangsssrc]

This is good information that Servo needed. thank you.

[@jeanpmagnanig]

Man, that's badass tunning! I can't wait to get mine! Great video as always!

[@robs4600]

Gonna use this for the 400SC V2 in my UDR

[@ateaserc]

Great job!

[@BoomslangSuss]

Can you explain in more detail what "Damping Factor" and "Overload Protect" voltage levels do please?

[@belkey3]

That servo is amazing I want one in every one of my R/C’s lol

[@redndeyes]

3yrs later. I'm catching up Joe!

[@MrAaronBahner]

Do you know which setting changes from serve to winch like on a 179

[@ExocagedRC]

you need the reefs programmer

[@MrAaronBahner]

@@ExocagedRC yeah of course, I have that.

[@MrAaronBahner]

Figured out you need to load the other firmware for whatever servo. Not bad

[@robbeattybikelife84]

Getting ready to do this with a 300 black case for my redcat lowrider, do I not use the red and black plug?

[@smokin0137]

Tuning a servo. Now we are in the future of technology. Thanks

[@brianmoreno3]

smokin0137 tekin came out with a programmable servo months back nothing new

[@LawrenceTimme]

Great feature, you can tune esc and radio so I don't see why you can't tune the servo as well!

[@rickdavid1795]

Big help Thanks

[@Cranklotus]

What if you dont have a direct power servo?

[@BGnation573]

I have another I think good question maybe you could make a video on it but any way say you have a scx10 2 and you take the servo from the original location and move it 90 degree. | -- something like that how do you set it so that your center so that your servo arm is in the right place hopefully you can understand what I’m trying to ask

[@Mazdatechsenior]

So my 1100 on my monster truck is not straight, I remove and try to make it straight but can’t get it o be straight. Either left or right. Can this change the steering or reset it. ?

[@ramonmartinez4856]

Can you center the servo with the software for installation ( Raw500)

[@ExocagedRC]

I just use the trim on the radio.

[@rezdad0108]

Great video, explained better than the actual directions in my opinion! So I have a simple question, would it be beneficial if you were to set the end time limit to way lower like lets say 5-10%?

[@Vanquishfanboy]

Is programming it needed or can we plug and play

[@KTMcaptain]

I wonder if the castle link will work

[@TheAmericanUhate]

Do you have to buy this to use a reefs servo or does it work without the programmer, and the programmer is just added features?

[@Toodles77]

Programmer is for added features

[@19allennails]

👌🏿🧐 thanks!

[@TheBeardedGorilla89]

I hope this can fix my 422vhd servo issue. I set all trims to 0, centered servo horn and it turns hard one way and only turns a slight bit the other way. Nothing its hitting or stopping it from turning.

[@markclausson564]

Can you please do a server test with your tester when its turned up to 100%.

[@thatdrh]

Do reef servos not come 100% power?

[@ExocagedRC]

usually 85-95%

[@massourc2908]

How do you get the power supply for this servo

[@johnririe8506]

does this servo eliminate the need for a bec

[@KaedensKustoms]

Yes but you'll need to run a separate battery for the servo

[@johnririe8506]

@@KaedensKustoms so it does not just plug into the balance lead of the main battery

[@miketye2805]

John Ririe yes it does plug into the balance port of your lipo no need to run separate battery’s. Reefs even sells the connectors for whatever lipo you run. I like to just solder a jst pigtail from my esc wires that way it stays plugged in and it’ll run whatever battery I choose to run and not have to switch connectors between 3-4s ect. If that makes sense. An when I unplug my battery it in plugs power to servo as well. Much better option

[@johnririe8506]

@@miketye2805 Thanks for the explanation. Wish he would have covered that in the video

[@BGnation573]

Where can I get one that I don’t have to use PayPal

[@robertdale7453]

a$$triple7 love it

[@dylantobin8912]

Always best to turn the power output to 100%?

[@ExocagedRC]

well, sometimes its just not needed. Especially with the 777 servos

[@BGnation573]

Ass triple7?? Lol

[@northsandiegorc4248]

Yes “ASS” stands for “AGF Superior Servo” funny that software that’s their own has another companies name In it...

[@traildevil67]

WHY IS THE SERVO NAME AS$ TRIPPLE7*? Wtf Reefs?

[@northsandiegorc4248]

traildevil67 because they did not write the software, AGFrc did. “ASS” stands for AGFRc Superior Servo” AGF also produces programmable servos I like reefs claim of being thee only programmable servo. It’s odd that the AGF programmer works with the reefs software...also reefs micro 99 is a AGFrc A20 servo...but cost 54.99 where as the AGF a20 is 32.99 on amazon.

[@MrSweatshop1]

What’s with the name ASS TRIPLE7?

[@TheSpaceCoupe57Chevy]

Their customer service is trash for what they are charging