at last.. the best solution i was looking for my carhartt bic lighter.. thanks👌🏼
@mr.mendoza80583 жыл бұрын
Thanks plz like share and subscribe 😎
@goatlady77612 жыл бұрын
The best bic lighter refill video on KZbin.
@mr.mendoza80582 жыл бұрын
Thank you very much I appreciate it 🙏
@ishimwemanzibruce7486 Жыл бұрын
facts 🫡
@JoDidntHearYou Жыл бұрын
Thanks for the video! This helps so much. I saw in the comments that you might do a video on how to replace the flint? I’d really appreciate that if you’re open to filming it!
@trashpunkdad Жыл бұрын
Been doing this for years now. The Bic I use every day is almost 4 years old. The only hard part is replacing the flint when it runs out.
@mr.mendoza8058 Жыл бұрын
That's good mine is 10 year's + and actually it's not that hard to change the flint
@trashpunkdad Жыл бұрын
@@mr.mendoza8058 maybe you should make a video on it. I'm sure it would help out alot of people cause it can be tricky but once you get it down it's not bad
@mr.mendoza8058 Жыл бұрын
@@trashpunkdad yea next time my flint is low ill do a video on how to change the flint
@bassheadlife492 Жыл бұрын
How do you replace the flint?
@mr.mendoza8058 Жыл бұрын
@@bassheadlife492 i been getting asked this question a few times and my flint is getting petty low so I'll make a short video of how to change the flint
@richardfile-muriel3 жыл бұрын
Mr. Mendoza, thanks for sharing this info; this is the most precise, high quality hack on the bic lighter that I've seen.
@MikeSims703 жыл бұрын
kzbin.info/www/bejne/qp6vfquJobGdrbs
@superaquatic28532 жыл бұрын
@@MikeSims70 STOP promoting your video on other peeps comment sections. This guys method is way faster and requires less equipment. I saw your video years ago and it looked like way to much work. This video has a much simpler method that appears to be worth the time it takes.
@daciasdiy18612 жыл бұрын
@@superaquatic2853 i didn’t like Mikes his was drawn out abs difficult plus he paid $10 for a damn valve
@jackofalltemposdigitalchil74832 жыл бұрын
Short and sweet and to the point. No BS just ordered my valve an hour ago. gonna follow your tutorial and have a bic for life. You sound kinda down in the video. Maybe you were just tired. Either way you are a moneysaver with this trick.
@mr.mendoza80582 жыл бұрын
Yes just follow and ur going to luv ur refillable bic lighter and yes I was somewhat tired I work graveyard shift anyways G Luck
@garlicbuzz2 жыл бұрын
well done hombre. love your vibe too. good thing I been saving lighters for ten years.
@mr.mendoza80582 жыл бұрын
Thank you I appreciate it 🙏 now you can actually use ur favorite lighter for another 10 year 😎
@thetrentpete4 ай бұрын
What size drill bit is that?
@Jnet2nns Жыл бұрын
Love it and it works! Thank you.
@mr.mendoza8058 Жыл бұрын
Glad it worked for you now enjoy ur Bic for years to come...
@CottonTailJoe Жыл бұрын
Awesome sleeve.
@mjay776 Жыл бұрын
What size of drill bit is it? And can't you just keep drilling a little further in to break the divider? Oh and they're sold out everywhere I looked did you find a different website to get them?
@mr.mendoza8058 Жыл бұрын
Found this www.ebay.com/itm/121311637302?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=i3RT7ejjRMa&sssrc=2349624&ssuid=rsqhZGdJQwy&var=&widget_ver=artemis&media=COPY
@shawn3693 Жыл бұрын
Thx Mr Mendoza, i’m going to do this on Thermacell butane cartridges, you spanked all those boneheads!
@mr.mendoza8058 Жыл бұрын
Thanx I appreciate it 🙏
@big_mo-23el332 жыл бұрын
This is awesome I wanna make my own so it can last for years 😂🖤Where can I get the valves?
@mr.mendoza80582 жыл бұрын
I bought them on eBay from a website from a website called www.madbullairsoft.com
@rafaeltorre1643 Жыл бұрын
You can get it from a $10 benzomatic torch solder iron from hardware store. It’s okay in a regular bic but I tried an ez reach bic and I couldn’t screw it on good enough and it leaks out the valve itself. I have better luck with the B type valve like on clippers. They don’t leak as much.
@mr.mendoza8058 Жыл бұрын
Yeah that torch hear where I live they are 20 bucks sux
@slametsopandi31883 жыл бұрын
Thanks for sharing
@TamNguyen-wt8uw Жыл бұрын
Van đó mua ở đâu mình rất cần nhờ bạn chỉ thank you
@dipakdabhi2007 Жыл бұрын
Good work 👏
@mr.mendoza8058 Жыл бұрын
Thank you I appreciate it
@randomm58936 ай бұрын
Good shit my guy💯
@october12272 жыл бұрын
Where did you get the lighter case? I have one but cant remember where i got it lol
@mr.mendoza80582 жыл бұрын
I bought it online years back can't remember at the moment ill try to look tho
@theferrones8 ай бұрын
Was that a number 30 drill bit?
@scooterson032 жыл бұрын
😱 so glad the bit didn't bite ya...
@DM-1981 Жыл бұрын
Man where did you get that sleeve for the lighter?
@mr.mendoza8058 Жыл бұрын
Got it here in my town at a lil store but only had them in Halloween times so I took all the rest they had
@All404G00d3 жыл бұрын
Helpful thanks
@mr.mendoza80583 жыл бұрын
No problem 👍
@Zaur_Xelilov2 жыл бұрын
hello how can i get that valve? Is there also aliexpress???
@mr.mendoza80582 жыл бұрын
At airsoftgogo.com
@daciasdiy18612 жыл бұрын
Where did u get the valve and how much did it cost
@mr.mendoza80582 жыл бұрын
Airsoftgogo.com
@mr.mendoza80582 жыл бұрын
I think they are 3 valves for 10 bucks
@jesinu2 жыл бұрын
Bless you gentlemen
@rockyhunter86162 жыл бұрын
I like it
@nathanjackson672 жыл бұрын
Found me something to do for the weekend thanks 😂👍🏾
@mr.mendoza80582 жыл бұрын
No problem 😎👍
@Kevin-xn5qn Жыл бұрын
Wild!
@eugeniabermudez8224 Жыл бұрын
What is the website you ordered the fill valve from? Part number?
@mr.mendoza8058 Жыл бұрын
Airsoftgogo.com
@kristianmartialsurvivalper8522 Жыл бұрын
How many millimeters is the hole the drill bit of how many millimeters
@vegetablepolice13 жыл бұрын
Fill with a basketball filling tip
@travisandrews41812 жыл бұрын
Cool thanks
@mr.mendoza80582 жыл бұрын
👍😎
@eurohawk61163 жыл бұрын
love my bic lighter...can you tell me the size of the valve please?
@mr.mendoza80583 жыл бұрын
I'll have to check on that for you I just ordered some more of them ill check a soon as they get here
@superaquatic28532 жыл бұрын
@@mr.mendoza8058 ?
@mr.mendoza80582 жыл бұрын
You can get the valves at airsoftgogo.com 3 for like 11 bucks
@eurohawk61162 жыл бұрын
@@mr.mendoza8058 thanks
@KnoxLocks2 жыл бұрын
@@mr.mendoza8058 I can see the site,but I don't know the valve sizes. Do you happen to know them or have an exact link available? Thanks for the video,much appreciated
@stephanie88382 жыл бұрын
You'll just have to get the flint out of empty lighters, and it not easy, to put a new one in. It gets easier though
@billyevans42222 жыл бұрын
It is easy to get the flint out of a bic, but it might be hard to out it back.. There is damn near a half inch of flint in a bic anyway so you could probably get 10 refills out or the original flint.
@rafaeltorre1643 Жыл бұрын
It’s easy once you know exactly how to do it. Otherwise you’ll be there an hour chasing the flint. Lol
@mr.mendoza8058 Жыл бұрын
My flint is running out I might do a video how I change it on mine
@Kevin-xn5qn Жыл бұрын
@@mr.mendoza8058 yes do that
@mr.mendoza8058 Жыл бұрын
Very soon I will my flint is getting petty low
@bryaneltreygalolo96003 жыл бұрын
What is the name of that gasket?
@mr.mendoza80583 жыл бұрын
Valve comes with the new gasket
@user-uc9tl4fx9u7 ай бұрын
Где купить клапан ?
@juliodiaz892210 ай бұрын
What size drill bit was that
@mr.mendoza805810 ай бұрын
I want to say 1/8 drill bit
@sootleprasad7758 Жыл бұрын
Could you please let me know the name of this gadget which you used as a nipple? From where can I buy them (online)?
@mr.mendoza8058 Жыл бұрын
The fill valve u can find it at Airsoftgogo.com
@luizcarlosmariotmariot71293 жыл бұрын
A ondi encontrá essa válvulas pra comprar
@mr.mendoza80583 жыл бұрын
Compre en / Bought at WWW.MADBULLAIRSOFT.COM
@ernieg Жыл бұрын
anyone know where i can get the valves ??
@mr.mendoza8058 Жыл бұрын
Airsoftgogo.com
@Minong_Manitou_Mishepeshu4 ай бұрын
Thise valves are like gold, at the madbull site they sell them 3 for $10 but the site glitches. Only other option is from Hong Kong for 3 for $30. Anyone know where to get some quality valves at a reasonabke price?
@4dirt2racer03 жыл бұрын
daam man if that it slipped a single time it would have went thru some of ur fingers thank god it didnt
@mr.mendoza80583 жыл бұрын
I know right. I done it plenty of times tho 👍
@robertsmith6163 жыл бұрын
What about flint
@mr.mendoza80583 жыл бұрын
Good question yeah I get the flint from old lighters I find and take the flint out they have a big piece left
@iowatheother4986 Жыл бұрын
I refill Bic lighters and sell them as "refillable Bic lighters"
@devanh85922 жыл бұрын
i been doin this for ages just gotta watch out for lighter thiefs
@mr.mendoza80582 жыл бұрын
I know that's why I have my lighter case on it I won't forget that
@phubuivan22232 жыл бұрын
Mua cai dit ay o dau
@mr.mendoza80582 жыл бұрын
Airsoftgogo.com
@Krashworship2 жыл бұрын
#countersink
@CmdrTigerKing Жыл бұрын
How high were you making this
@mr.mendoza8058 Жыл бұрын
I stay in outer space 🌌🛰
@213spaceforce4 ай бұрын
Did u drill your damn hand 😂
@borregosantamuerte1681 Жыл бұрын
Te ubiera salido más barato con un encendedor recargable y quitarselo y ponérselo al bic yo los hago a cada rato
@mr.mendoza8058 Жыл бұрын
Enseña me como porfas
@borregosantamuerte1681 Жыл бұрын
Te falta quitarle lo que tiene en medio el bic con eso si no lo quitas no llena el encendedor
@mr.mendoza8058 Жыл бұрын
Si se lo quite
@kamrankhan-ud5vd Жыл бұрын
Why do this? Why not just get a refillable lighter?
@mr.mendoza8058 Жыл бұрын
I did get many refillable lighters, but they all suck the go out fast. The little valves suck and leak, same thing with the ignition coils versus the valves for the Bic lighters are bigger and the flint is easy to get and replace. in my opinion.
@kamrankhan-ud5vd Жыл бұрын
@@mr.mendoza8058 Oh ok thanks for replying
@joserenderos19013 жыл бұрын
nevermind I rather got to store and get me a new for 0.99 cents ...
@mr.mendoza80583 жыл бұрын
Sure you can do that also 😎
@virgilio63493 жыл бұрын
Or a Clipper aswell
@mr.mendoza80583 жыл бұрын
@@virgilio6349yeah but theirs nothing like having ur 10 year old BIC LIGHTER
@billyevans42222 жыл бұрын
Where can you get them for 99 cents? They cost over 2 bucks everywhere I go.
@rafaeltorre1643 Жыл бұрын
I didn’t know gas stations sold Bics for a few cents of profit. I’m not driving 10 miles round trip to Walmart to buy an entire pack to get them for $1. Otherwise no one sells bics for $1. A crack lighter yes. Bics are $2 to $2.50. I don’t use cheap lighters anymore. I use MK grip pro 2.0 lighters. They are permanent and are way better than bic or clipper. Soft solid build quality, adjustable, clipper wheel, solid metal with design around flame. Refillable. Everything both lack. Never need another lighter again. I wish they sold them more places. On eBay.
@Duke937202 жыл бұрын
Just buy a clipper lighter. They're refillable.
@mr.mendoza80582 жыл бұрын
They are for a lil bit but they go out fast
@marie76222 жыл бұрын
@@mr.mendoza8058 The clipper are rechargeable both stone and gas, what will you do when the bic runs out of stone?
@mr.mendoza80582 жыл бұрын
That's a good question what I do is I buy new flint for a few bucks or I just get any old lighter and get the flint out usually the butane runs out faster than the flint dose
@rafaeltorre1643 Жыл бұрын
Clippers can last forever with maintenance. But I hate the flame size. Whenever I put a valve on a bic the flame sucks after the pressure changes. And must be warmed up.
@mr.mendoza8058 Жыл бұрын
Yeah the clippers do last but I don't like them because every time you have to change the Flint those little plastic screws are so hard to put in they strip real easy and the way that I did it with my valve there's no loss of pressure and it works fine no warming up no nothing I had mine 4 over 8 to 10 years with no problems 😎
@borregosantamuerte1681 Жыл бұрын
Es otro encendedor no es el mismo
@mr.mendoza8058 Жыл бұрын
Es El Mismo
@talhadriss2370 Жыл бұрын
Use clipper plz
@mr.mendoza8058 Жыл бұрын
I did use clipper Lighters for a while until I Had to change the Flint on them The tiny little plastic screw always got stripped.
@talhadriss2370 Жыл бұрын
@@mr.mendoza8058 you screw it to tight you dont need to screw it all the way in
@mr.mendoza8058 Жыл бұрын
@talhadriss2370 Clippers are good but none last me as much as my refillable BIC Lighter it just turned 10 years old on the 13th of June. 😎
@talhadriss2370 Жыл бұрын
@@mr.mendoza8058 how do you replace the flint
@mr.mendoza8058 Жыл бұрын
@talhadriss2370 check out my video on how to replace your refillable BIC Lighter
@UltraMagaFan6 ай бұрын
A zippo and butane insert costs $30. This is dumb.
@Minong_Manitou_Mishepeshu4 ай бұрын
Who wants a big stinky brick Zippo?
@mr.mendoza80582 жыл бұрын
You can get the valves at Airsoftgogo.com
@superaquatic28532 жыл бұрын
What if I was to take a valve off of random torch lighters, and used the valve to modify a Bic? Will all, or any size valves fit?
@mr.mendoza80582 жыл бұрын
@@superaquatic2853 you can buy a Bernzomatic torch at home depot but they are like $30 for only one valve
@superaquatic28532 жыл бұрын
@@mr.mendoza8058 I would rather have a bernzomatic then a Bic. What I am asking though is if I was to take apart one of my many different refillable lighters that I have would most valves work for Bic modification? Because most of the valves I have on other lighters are much smaller.
@mr.mendoza80582 жыл бұрын
Yeah I tried that but had no luck with it the only one that' works good with no leaks it's this valve because it Has the screw part to the top so I grabs good to the plastic and it will keep the seal locked no leaks 👍
@superaquatic28532 жыл бұрын
@@mr.mendoza8058 Thank you. What sucks is I had that bernzomatic back in the day and threw it away after it stopped working. Wish I would of held onto it.
@CottonTailJoe Жыл бұрын
Awesome sleeve.
@mr.mendoza8058 Жыл бұрын
Thanx I got a few more styles also I seen them.. like them and bought them all 😁