Refills the solar system, with anti-freeze coolant - 024

[@joshskjold9183]

What a great tutorial! Thank you very much for that : ))) Your system is so efficient and I wish mine were as user-friendly as yours, but I guess I will have to apply the same concepts. Thanks again!!!

[@MyPlayHouse]

Hi Josh Skjold Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@gerardoconnor8462]

Hi is this the same procedure for solar tubes for hot water ?

[@MyPlayHouse]

A spicial product is available,,, I am just using the stuff for cars.

[@taktsig]

Hello Sir nice & helpful video. I was wondering if we need to replace old fluid with new to the entire circuit (from collectors to the hot water tank in basement), from where should we drain it? If we do it from the collectors side on top of the roof, much old fluid will remain into the pipes below roof level... THX

[@MyPlayHouse]

I reuse all my fluids in my system,, I filter it with a coffee filter if it is full of rust/stuff.

[@abdulrahmanayad5800]

When you fill the water by this way from the top of the system and collectors , how you can ensure there will no air insides the pipes loop?

[@MyPlayHouse]

It´s not easy,, but it has worked for years.

[@dansloss2566]

The anti-freeze you use should be food-grade (Propylene Glycol) in case there are leaks into your hot water. Don't use auto anti-freeze.

[@MyPlayHouse]

Hi Dan Sloss Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@romakayak]

Don't drink from the hot water tap is the easy answer. Car anti freeze is superior and only €15 5 liters.

[@chriskennedy7534]

​@romakayak No one is drinking it, but brushing teeth, showering, washing dishes, even laundry, will lead to exposure to a toxic liquid, if it leaks inside heat exchanger. Og poster was correct. It's Blue which is correct colour for HW service, auto coolant is usually green or red, but he did state it was auto, and didn't answer in his reply, so who knows.

[@niculaistan8284]

Interesant!

[@MyPlayHouse]

Hi Niculai Stan Thank You very much! reminds me that I probably need to check if that is all good :-) Thank you for watching! :-)

[@YodaW19]

Thanks for this upload. This encouraged me to do this little maintenance myself.

[@MyPlayHouse]

Hi YodaW19 Yahh i really need to do this again my self to!! Thank you for watching! :-)

[@johnhoi7843]

Hi Sir , I am the first time using solar water heater , please let me know it must to add the air to the red tank , when I changed all the anti-freeze ?? thanks

[@MyPlayHouse]

Hi JOHN HOI Thank You very much! There is no need to change to anti-freeze,, It is in there all year. But to top it off, I do remove pressure from the red tank. Thank you for watching! :-)

[@johnhoi7843]

Because our country is hot whole year , not snow , so we add the tap water instead the anti-freeze coolant , when I add the tap water the pressure meter will go to 2 ~ 3 Bar automatically . so is it OK for the heater work ? Thanks for your help Regards John

[@MyPlayHouse]

Hi JOHN HOI I am no expert on this at all,, and I am probably going it wrong,, but it works for now. sounds like you are using the water pressure to pressurise the system. I am sure it is fine. I run mine a bit lower,,1-1½ Bar. Mine leeks if I goes higher :-/ Thank you for watching! :-)

[@billyding6814]

Thanks for the video! Very useful! I have a similar system called Kingspan Solar. I will definitely try to fill up myself. One other question, I am getting an error message of night circulation and it might be a problem with the non return valve. Any idea where the non return valve might be? Many thanks!

[@MyPlayHouse]

Hi Billy Ding Thank You very much! glad you liked the video :-) No no idea what a non return it :-/ Thank you for watching! :-)

[@swedensy]

Air is still trapped in some places..

[@MyPlayHouse]

Might be 🤔

[@ToniStanojoski]

This is wrong on so many levels i wont even start to explain. JUST DON DO THIS !!! EVER !

[@MyPlayHouse]

And you are clueless,, but try to look smart,, nice try!