LAST D/B series SHIFTER you'll EVER NEED? | K-Tuned Circuit X install

[@Project_EG2]

Apparently you’re supposed to reuse your oem plate if you have a d series. The 3 hole one is for b series shift linkage only

[@danhendershot8511]

Hey you're missing the metal piece that goes on top of that mount bushing at the rear of the stabilizer rod. That poly bushing/mount will tear through without the metal piece that goes over it to support the rod.

[@Mrtrunks]

That battlecraft shift knob is the best!

[@RefineMovement]

Yeah man that thing rocks

[@spoonfixer3387]

Truth!!!! I ordered the extended aluminum. Cant wait. Awesome call on the knob.

[@Kai_DC2]

Thank you for this video, I think I just found my problem since I brought this shifter second hand. Couldn't get this shifter to move properly as it should and noticed it's missing those little spacers that go inside the pivot point of the shifter. Soon as I find those I will be back here to clarify! It barely reaches 1st 2nd 5th and reverse.

[@singleCamTrackEF]

KTuned advises to remove the billet base plate and swap OEM stamped steel base plate on, not very good for 200 dollars.

[@savagewarriorzz2199]

I know you shop at lowes! #TEAM KOBALT!! I finally purchased there battery ratchet! Changed my life! Dope shifter ima have to get me one.

[@zadok3089]

Love how it’s coming together man, can’t wait to see her runnin again an rippin on the track❤️

[@RefineMovement]

Thanks a lot! Yeah me too haha

[@MotoStratton]

@r_fab_machining makes a billet plate that chassis mounts the new Ktuned or Hybrid Racing Shifters eliminating the Stabilizer bar for a totally different and better feel

[@Jason56B]

I belive 1320 performace makes a shifter that mounts to the chassis and eliminates the stabilizer bar too

[@itaoo22]

could you send me a link to this? I dont want to cut my linkage

[@spoonfixer3387]

If the interior floor is bumming you out just put new carpet in without the jute. Weighs practically nothing but gives the interior a much more finished look. Cool shifter bud. I'm debating between a k turned lean back or the hybrid racing unit. Up in the air still.

[@RefineMovement]

I’m sure both the Hybrid and the K tuned are cool. good problem to have man haha

[@upfactoryracing4148]

Lookin good! Yeah when you get a nice piece of equipment it really inspires you too clean the surrounding area up.

[@RefineMovement]

Sure does! And my car is a pit!

[@upfactoryracing4148]

@@RefineMovement but not for long!

[@general_pinochet]

Stickers look awesome man 👍

[@ericavila3427]

You have single cam single cams linkages won’t slip in has same has b series

[@98Kentuckian]

Can't wait to see it driving!

[@NikosDIY]

Robbie you are a legend 💪 Wouldn't it be better to cut off a piece of the thick ktuned part ?

[@RefineMovement]

Hmm I don’t think so anyway. I’d rather cut my cheap stabilizer bar that doesn’t have hardly any strength to it rather than cut that very solid piece of metal from the new ktuned piece. We’ll see how it goes anyway

[@jacksongibson2540]

When I bout mine it said to re use stock plate if u have d series on the website

[@joelvillalobos4279]

Nice video, man. Do you get any vibration or rattle from the shifter? I installed the Hybrid B/D short shifter and I get a rattle / hum / vibration and certain RPMs and deceleration. It drives me nuts.

[@MrDeroof]

The spacer is for the bolt that go trough it thats why its long sorry for my crapy english i am dutch 😂

[@RefineMovement]

I understand you perfectly fine thank you! Yeah I was figuring it was a spacer but I didn’t end up using it.

[@HotRod-wv4vm]

Keep up the great work

[@bsbuilt]

Lol until you try the hybrid b/d shifter

[@RefineMovement]

Ha nice! I haven’t tried it yet

[@singleCamTrackEF]

I haven't tried the Ktuned, but based on pivot ball specs alone: upgraded delrin bushing (ktuned) VS spherical bearing (hybrid racing). Lol I think we can guess which is smoother!

[@marcozuniga8163]

2yrs late but your plate looked like it was flipped around. All you had to do was back it out from the grommet and flip and install and 2 of 3 holes would of lined up.

[@specializeds1974]

Why pay for something that doesn't fit? aluminium plate?

[@dalelitteral9459]

Guys I really wanted to buy a SOHC sticker from you guys and check out your website but for some reason I keep getting an error screen everytime I try to load your page. I've actually tried a few times over a few days but can't connect to your website. I actually have a 97 Civic myself and was trying to get one of your decals to put on mine to support you guys and your channel but i had no luck getting on your site. I'm a subscriber of your channel and like the content. Its inspired me me to get out there and make my Civic personalized to me and what I want. Hopefully I can figure out a way to pick up one of your stickers, I'd be proud to support your channel and content.

[@RefineMovement]

Thanks for hangin out on the channel man! Not sure why you’re having trouble getting to our site, the link works fine, I just clicked it. Below is a link directly to the stickers, hopefully you find it works for you. Hope you have fun with your car and thanks for your support! www.etsy.com/shop/RefineMovement?ref=l2-shopheader-name&order=price_asc

[@dalelitteral9459]

@@RefineMovement Awesome man, it connected me straight to the sight, no problems. Getting ready to place my order now. Really appreciate the link, good looking out. Keep up the awesome content, I try to stay caught up on all your latest posts. Unfortunately my rack and pinion just went out on my civic and I'm really dreading trying to tackle this project. I'm sure you guys don't miss the days when you had all the extra wires, AC lines, splash guards, and all the other fun things that you all shed for weight reduction for racing. I have a feeling this is really going to be a pain in ass job. Hopefully the car gods can shine a little grace my way, make it go smoothly. I can barely get enough clearance to even attempt it. Do you guys have any advice for such a daunting task?

[@danhendershot8511]

Also any shifter with any part of it that has set screws is trash. They come loose, they strip out, and shit will fall apart

[@gurjindersingh199]

Do you notice a difference ?

[@RefineMovement]

Haven’t driven on it yet so I’ll let you know later but just sitting in the drivers seat moving it around the shifts felt real nice and precise anyway

[@gurjindersingh199]

@@RefineMovement I am using stock shifter it's okay but I have never used anything aftermarket. I might buy this. Waiting for your driving review :)

[@robferratto8379]

Shouldn't have to cut anything for a $250 short shifter. Sorry. Love the videos, though!

[@marekae8660]

It bolts right up for b-series linkages, but for the d-series, you have to reuse the plate that he removes and use that instead of the aluminum plate, or just cut it lol

[@joeygutierrez2657]

hybrid is much much better

[@steelontarget]

1st

[@officerxdoofy4882]

720p about to unsubscribe👎👎

[@RefineMovement]

Yeah sorry, I don’t know what happened with that episode. I filmed it a while back. New ones coming up look good though!

[@louievasquez2197]

Really lol unsubscribe for 720p!? That's pretty sad.. I only unsubscribe if content is wack but I love all the info you share bro! @Refine Movement! Awesome videos keep them coming,🙌✌️😎