You said you have never used w296 but according to Hodgdon and St. Marks powder W296 and H110 have always been the same powder
@krod216211 ай бұрын
I got news for you. If you use an H1 ten, you're also using the powder you've never used. Which is Winchester 296 they are the exact same powder.
@CRice-ln8lm4 жыл бұрын
Optical screen Chronographs are not accurate for shot loads and will show velocities that are about 30 FPS off of actual. Also, the distance from the screen center to the muzzle can make a bigger difference than you might think. Hodgdon H-110 is exactly the same powder as WW-296 according to Hodgdon who sells both. The Lil Gun and the Alliant 410 are both extremely bad for hull life and will cut it in half when compared to 296/H-110. The Alliant 300 MP is the new best powder for the 410. Velocity above 1300 seems to give the best performance with the 410, do not limit yourself.
@410outdoors64 жыл бұрын
I will check out the Alliant 300 MP. I was not aware of this powder until now!
@pitchforkpeasant62194 жыл бұрын
300 mp is magnum pistol. Is that a good idea in a judge or a governor?
@inglwud56254 жыл бұрын
I will keep an eye on your channel I reload 410 too and new loads that you try will save me time on mine. Only powder I've been using so far was h110.
@Hogheadsforbreakfast3 жыл бұрын
Try the "Stretch" wads from Ballistic Products. They pattern good for me.
@TheMtoutdoorsman3 жыл бұрын
@@Hogheadsforbreakfast thanks wi check them out.
@northstarw0w3 жыл бұрын
H110 and 296 data are supposedly the same according to manufacturer
@zerrodefex2 жыл бұрын
@@northstarw0w they are the same loads. Funny how they're called pistol magnum, I find them way to hot for revolvers and only use those powders in my 357/44 magnum lever guns. Lil'gun especially is too hot in a revolver.
@ozark_trapper3 жыл бұрын
I only been loading for my 410 about 6 months. Only powder I have used is Winchester 296. I was down to 1 can 296 1 can 300MP. The only powder I could find locally was 1 can of 300MP and 4 pds keg of 410. So I bought them. But I only load 3 inch hulls for hunting.
@baronofb.5323 Жыл бұрын
I just got into reloading .410, and am loving it for sporting clays. I’m loading the old Win AA 2.5” hulls with 1/2oz. shot and Win 209 primers. I’ve only found H110 and have loaded 14.4gr. ( for 1250fps and 15.2gr. for 1300fps (loading on a MEC 600Jr. MkV and that’s what my #11/#12 bushings are dropping). Both pattern and break clays well, but I’m finding H110 to be very sooty/dirty. Is that typical, in your experience?
@cal30m1 Жыл бұрын
How do you know your electronic scale is accurate? Did you ever test it using a quality balance scale? I have reloaded pistol, rifle, and 12ga for 35 years. I was recently given a mec press for a 410 and a garbage bag full of once fired paper Winchester hulls in great shape. Any advise on reloading the paper hulls?
@frankmartino8353 жыл бұрын
Have you ever tried to reload Longshot in a 410? The burning rate is basically the same as the Alliant 410 powder.
@410outdoors62 жыл бұрын
No I have not.
@foalima19734 жыл бұрын
Great videos been haven hard time finding load data for 410 power for loading 000 buck shot
@samwilliams11426 ай бұрын
3 x 000 buckshot are 0.485 ounce that flies as ½ ounce. If you have 70 grain 000 buckshot.
@samwilliams11426 ай бұрын
4 x 000 buckshot are 0.64 ounce. 11/16 ounce is 0.6875 ounce. 5 exceed ¾ ounce I don't do 5.
@stephencarmichael5156 Жыл бұрын
I've had good results with Blackhorn 209 it was all I could get so I used 25g loads with 38cal wad cutters for slugs or 36cal round balls.
@eduffy4937 Жыл бұрын
Why run blackpowder in a nitro gun?
@stephencarmichael5156 Жыл бұрын
@@eduffy4937 Longer Burn gives a youth less recoil
@eduffy4937 Жыл бұрын
@@stephencarmichael5156 but an extremely filthy gun and corrosion from b.p.
@stephencarmichael5156 Жыл бұрын
@@eduffy493770% Isopropyl Alcohol neutralize and cleans. No fuss
@eduffy4937 Жыл бұрын
@@stephencarmichael5156 the price of bh209 is so reduculous these days. I bought a lb for my muzzleloader a few weeks back. $58/ 8oz... ouch. Havent bought any in 5years simce i had a good bit on hand but man, i wont be doing that again anytime soon.
@ryanmarin4403 жыл бұрын
Thank you for this
@williamcollins4082 Жыл бұрын
Guessing but whatever powder that you can lay your hands on !!! Look into full brass shells !!!
@beardedbirddog2085 Жыл бұрын
thanks !
@theamputeehunter20744 жыл бұрын
Alliant has a .410 powder
@bobcarrender26933 жыл бұрын
At 8:13 he did show the Alliant .410 powder as what he has used a lot of...
@cdcropper10 ай бұрын
H110 is ww296 same powder
@lazytdАй бұрын
296 IS H110
@BlaineMedley4 жыл бұрын
Do you shoot trap or skeet? i just started shooting .410 trap and it a lot of fun
@410outdoors62 жыл бұрын
I have shot everything with 410. However usually shoot skeet.
@cal30m1 Жыл бұрын
How do you get a good reading on your chronograph? I always thought, is this giving me the wads fps?
@kennethknapp13263 жыл бұрын
Hello I am new to 410 loading with a Mec. 650 jr. You made mention of using a chronograph. I just bought one. What’s the distance you set it up to shoot ur 410 through
@410outdoors62 жыл бұрын
I set it about 5-10 feet from the end of my barrel.
@kennethknapp13262 жыл бұрын
@@410outdoors6 thanks for the feed back. Greatly appreciated
@ConfedVet3 жыл бұрын
Wanting to use longshot powder. How many grains for 410?
@niet3zsche2 жыл бұрын
45,
@dejo19763 жыл бұрын
My MEC 600 jr. Does uneven cramps
@410outdoors62 жыл бұрын
You should be able to fix this.
@eduffy4937 Жыл бұрын
Uneven crimps may be because shot is not settled or the case is not full enough.