Remove headlight / change bulbs / swap to LHD on 2006 Range Rover L322

[@gregmassiff2210]

Я на своем RR 3.6 TD в 40 градусов мороза 200 летел.Люблю его! Видео полезное, спасибо парни, всегда так лампочки меняю .

[@mj-pj2bw]

Still relevant , just saved me buying 2 eu headlights , thanks guys

[@simonjefferson]

If only we could get to Europe ! Glad it helped !

[@freedom9041]

Finally something that I've been waiting for quite sometime.

[@L663]

Good things come to the those that wait ! Glad it helped !

[@lucas99ro]

Thank you for your tutorial. It helps a lot! I have just saved 600€ in a few minutes. Thanks again!

[@thefunkyt]

Thank you for this info! I had no idea how to start that and you made what I thought was an afternoon job into a 15 minute job!!!

[@L663]

Glad it was helpful!

[@barnsej98]

Only if the screws are not welded in with rust? Full day drilling them out!

[@453421abcdefg12345]

Very many thanks for this video ! I have not seen any other guide to delving into the mysteries of the RR headlights, and to have found where the headlight beam deflector lives is an extra bonus, although I think I have to buy Right Hand Dip headlights to register it to use it in France.

[@Dubyaf]

To replace the Xenon bulb do you replace just the glass bulb or also the silver box on the bottom of the bulb?

[@jaredsvans6293]

What type of bulb? Says d1s but not same connector

[@goforward1149]

One tip... do not pull the release levers on the light assembly too much. Just one click should do it..learned it in hard way...

[@modifiedbear6178]

Is this an adaptive headlight assembly? If not, do you know if it's the same process to change the bulb on an adaptive headlight assembly?

[@troycollins2902]

Good job.. I really learn a lot today

[@russelllester214]

Thanks so much guys! Brilliantly helpful.

[@L663]

Our pleasure!

[@samrodian919]

According to the Land Rover drivers handbook page 263 you have to release it Anticlockwise.

[@tamtruong2815]

Do you know where to buy just the reversing camera

[@mitchellpanes6363]

Would this be a similar process on a 2005 hse headlights?

[@MrOlegalis69]

You guys are the best!! Haven't seen a video on the gas door..I own a 08 hse..the gas door won't lock when I lock the vehicle...thanks in advance 👍 Atlanta Ga

[@Bikerboythousand]

Great video. If you do change the sidelight bulb for LED then i would disable the adaptive lighting (corner lights) as LEDs don't like heat and those adaptive lights get very hot unless you change the H8 bulbs for LED too

[@billgaytes6845]

UPDATE: for all you "lucky" people to have the LED headlight (2011 on) you have to remove the bumper to get to a bolt that is below the indicator.

[@marcogarcia17]

Hi i seen all your videos and they have helped me with my own L322 i recommend your videos to who ever drives a range rover i have a question what size is the hid running lights? And tge high beams

[@L663]

Hi - this depends a little on the year etc of your car - a website that is good for checking this is am-application.osram.info/en

[@coolasice4750]

Hi, I followed your videos when I changed my bulbs on my L320 Range Rover Sport.. I'm wanting to know, do the headlight lenses come apart as I'm wanting to give mine a good clean as they've misted up, and cleaning them on the outside doesn't really work. I'm hoping the lenses can come apart?. Thanks

[@L663]

Hi - they sure do - see this video kzbin.info/www/bejne/omWUh5uBipKDbKc We have new lenses being manufactured so maybe wait a few ( 8 ish ) weeks and fit new ones ?

[@coolasice4750]

@@L663 Thanks for the reply much aoprecaite it. 👍

[@chadjones99]

so H-8 , T-10 , and what are the other bulbs ?

[@coreysingleton2142]

I didn't see you guys change the low beam light I only saw you take it out

[@jasonlee3291]

What do you call the screwdriver that you are using with the ratchet mechanism at the top of the handle? I searched online but can't find it at all.

[@L663]

Its a standard screwdriver with a hex end on it, we are using a rachet spanner to give us some leverage.

[@mt-emo8882]

is this same structure with l322 2002 ?

[@L663]

Sadly no !

[@jimmitchell306]

Morning guys.. First of all thank u for some amazing info on the old l322's... Second the screwdriver with the ratchet build in the handle....... And where did get it from??

[@L663]

I am puzzled - i didnt know we had this - but it does sound like a ratchet screw driver - i will ask Ian !

[@rodneymcmillan6717]

what kind of light does the dip beam take, H-7 like the main beam?

[@boblong6796]

Dipped light is a d1s or d3s. High beam or main beam h7. Cornering light h8 or h11

[@Tefy_1212]

What if the entire light just doesn’t turn on?

[@boblong6796]

Nice thanks for the insight

[@allenwalton453]

At 4:21 you made a mistake - dip beam is first, then main beam.

[@adzthewise]

No link for grill removal! Otherwise thanks for the vid!

[@anthonyfrantzis5844]

How do u remove the plastic off?

[@L663]

Hi - do you mean remove the plastic lens from the headlight ?

[@anthonyfrantzis5844]

powerfulukltd yesss. I have a 2003 discovery

[@anthonyfrantzis5844]

powerfulukltd yesss I have a 2003 discovery

[@L663]

Hi - check our our other video kzbin.info/www/bejne/qYamYneFj9uDn5I

[@ericreyes0375]

2009 upgrade 2010 headlights ...