Thank you very much! The method worked very well and in the first try itself. As suggested, I used pliers and twisted gently for 10-15 second disconnected from the board without any harm to pcb trace or the capacitor mess. Previously I used soldering iron and damaged pcb traces trying to remove these capacitors.
@varnasfix2 ай бұрын
You are welcome! Been there done that :) I was also struggling to remove the capacitors using soldering irons and also damage the tracks or lift them! Glad the video is useful!
@k2z3k07 ай бұрын
Nice one, thank you
@varnasfix7 ай бұрын
For who hit the dislike button, it would be nice to drop a comment as to why...
@varnasfix3 ай бұрын
You didn’t say what methods work for you though. I measure the capacitors in circuit. Sorry but removing smd capacitors just to test them is a really bad idea. You have done all the work to remove it and don’t solder a new one; I don’t get it. Plus in order to solder it back you have to heat it again and stress it so your measurements might not be correct after resoldering. Again I would like to hear what method you are using that won’t stress and damage the pcb…. Thank you for the input!
@varnasfix3 ай бұрын
You didn’t say what methods work for you though. I measure the capacitors in circuit. Sorry but removing smd capacitors just to test them is a really bad idea. You have done all the work to remove it and don’t solder a new one; I don’t get it. Plus in order to solder it back you have to heat it again and stress it so your measurements might not be correct after resoldering. Again I would like to hear what method you are using that won’t stress and damage the pcb…. Thank you for the input!
@varnasfix3 ай бұрын
You didn’t say what methods work for you though. I measure the capacitors in circuit. Sorry but removing smd capacitors just to test them is a really bad idea. You have done all the work to remove it and don’t solder a new one; I don’t get it. Plus in order to solder it back you have to heat it again and stress it so your measurements might not be correct after resoldering. Again I would like to hear what method you are using that won’t stress and damage the pcb…. Thank you for the input!
@varnasfix3 ай бұрын
You didn’t say what methods work for you though. I measure the capacitors in circuit. Sorry but removing smd capacitors just to test them is a really bad idea. You have done all the work to remove it and don’t solder a new one; I don’t get it. Plus in order to solder it back you have to heat it again and stress it so your measurements might not be correct after resoldering. Again I would like to hear what method you are using that won’t stress and damage the pcb…. Thank you for the input!
@varnasfix3 ай бұрын
You didn’t say what methods work for you though. I measure the capacitors in circuit. Sorry but removing smd capacitors just to test them is a really bad idea. You have done all the work to remove it and don’t solder a new one; I don’t get it. Plus in order to solder it back you have to heat it again and stress it so your measurements might not be correct after resoldering. Again I would like to hear what method you are using that won’t stress and damage the pcb…. Thank you for the input!