Remove stubborn dowel pins from your engine EASY!!!

[@MichaelSabo]

Have you ever had this problem?? Thank you for watching my video! Links for tools are below! Drill Index - amzn.to/3cyhspZ Vise Grip - amzn.to/2uU3jCl Pliers - amzn.to/39nNcff Needle Nose Pliers - amzn.to/32SRpoJ

[@BoostandBadHabits]

The fact I'm hear having to watch this video tells you how my day is going lol.. Appreciate the tip!

[@The0TherGamer]

Im having that day today my bro

[@nathangizaw2115]

Can't believe that actually worked, I used a socket set but worked literally the first try after struggling with one dowel pin for an hour

[@tomfrick9068]

Literally saved me so much time. I cant believe I have never thought of this before! Thank you!

[@TerrickHarden]

The intro is hilarious 😂 and that Reign is some good stuff. I can only drink a half can per 3-5 hours though or my heart will be racing

[@MichaelSabo]

What up Clutch; racing is always a good thing

[@Jiilaker]

Hahahhahaha that's how do it man..man I've so stupid, I can't even think how to do it like this.. You're a savior. Thank you sooooo much for this teach. I love you sooo muchhh 😘😘😘😘😘😘

[@Shortshifter04]

Had to comment here. Got stuck trying to pull one out just now... fast forwarded to what I needed to see and it worked...thanks dude

[@metal.kittens]

Thank you! as soon as my bf heard “drill index” he knew what to do😅 works!

[@trevorallison1046]

None of these videos ever work, BUT THIS ONE DID. Thanks brother!

[@julianojanuario6383]

Motion pro also makes a dowel pin puller. It’s got a mini slide hammer that attaches to them & plunks them out, works great. This is still a great tip for ppl that don’t want to wait for the tool or don’t care to buy it.

[@MichaelSabo]

Haven't seen that tool but it makes sense; sounds like a blind bearing puller!

[@jmy6050]

Thank you for a very simple solution to a difficult problem!

[@LyonhartZ2]

Hi sir. I am a harley guy and I wish I had seen your video prior. What a great idea/Hack!

[@egjr2722]

Exactly what I I needed for aa clean hole to work with without using the grease method. 👍

[@mikelwmc]

Good tip. I just replace the stubborn dowel. Thanks, Mike!

[@MichaelSabo]

I'm glad I could help Mike!

[@drew32]

Thanks for posting this. Worked like a charm!

[@brianmclarty5643]

I just used this trick, works great!

[@simonpelly1498]

This trick worked for me. Thanks for publishing!

[@JustinSmithWY]

This was gold for me tonight, thank you.

[@MichaelSabo]

Glad it worked man!

[@ladin425]

I just finished using a thread tap on them. I'm going to pull them out with a slide hammer. I like the idea of tapping them because you do not cause any distortion on the exterior and you also have an easier way of reinstalling them.

[@edgarrodarte8718]

Thank you your idea works so well. I was going crazy.

[@ononewheel7]

I usually put oil on all the new ones i install on builds and they usually come out pretty easy if I’m ever back in the engine! Nice trick!

[@MichaelSabo]

Thank you for watching onewheel; good idea; I usually anti seize them on install!

[@alexguiver815]

Going to try this on a stubborn cylinder base dowel I have soaking in penetrating fluid overnight, thank you!! Also I still have the aluminum base gasket so will probably refit that temporarily to protect the gasket face

[@chuckmarlin6192]

This is a good tip, thanks for doing this. I've used a torch to heat the case for stubborn dowels, but this trick looks a lot quicker.

[@chuckmarlin6192]

@Chaz Surrett yes, most of the time. But sometimes I end up wrecking the dowel that way.

[@nickmaddox5469]

Beautiful pipe mike. I like the technique u used with the dowel pins.

[@MichaelSabo]

Thank you Nick!

[@speedineed5327]

15 seconds of good info ,spread over 9.29 minutes. Thanks for the 15seconds. lay off the energy drink. Thanks!

[@ethownzbh]

It’s thanks to you that my S2k isn’t a smoldering pile of ash rn. Thanks for the technique.

[@toweringhorse2054]

That is really clever, thanks!

[@Jess-db3yf]

Great tip! Dyno the 2 pipes 💪🇺🇸😃

[@AngelFernandez-br7xs]

Like these type of videos makes me crack up every time 😂 keep it up and soon you’ll be at the top

[@MichaelSabo]

Thank you for watching and for the feedback bro!

[@250rtrxjunkie]

Cool tip big Pimp👊🏻🤗🤗

[@MichaelSabo]

Thank you brotha!

[@papi352583]

Wow. This works great.

[@Raindrops4891]

absolutely genius my G lol saved me

[@escondidonative2903]

Bruh u saved my life. Cyber knucks 🤜

[@offroadworks3653]

never knew this but it will help for future references !!

[@RadMachines]

Thanks bro! This helped me a lot!

[@nscooz745]

You the man! Love the videos bro!!

[@MichaelSabo]

Thank you for watching man!

[@hinghk]

Many thx for the tips, you save my day.

[@billhenry7833]

10 minute video for 30 seconds of advice

[@sanjkustoms9122]

Thanks for the idea

[@mxrider2strokebraaap54]

Nice little hack 👌

[@ronniewilliz153]

Has 2vintage ever reached out to you. For tunning tios. Just wondering.

[@MichaelSabo]

He actually did DM me about the digs I made; dudes on another planet lmao

[@ykruH]

Nice trick for the dowels, will adopt that technique 4 sure ! And what a nice finish on that chromed/nickel plated pipe !

[@pangasinanled9234]

thank you it works 👍

[@clementelara3607]

The pipe si beautiful😍

[@icemonk12]

Great video👍

[@dancastillo27]

Should the drill set be metric or SAE… meaning you know how they are each slightly different in sizes? The thinking being the slight difference in sizes might allow for one to fit more snugly inside the other. IDK just a thought

[@pedrofernando176]

Brasil ligado no vídeo top demais🤙🤘

[@Shaun_81]

Hey Mike, what happened to the counter-shaft? I wanted to see how you got that thing out.

[@MichaelSabo]

Meant to put that in my last video and forgot; I heated it with a torch after letting it soak in penetrating oil overnight and it came out with some hammering.

[@Shaun_81]

@@MichaelSabo Cool man, thanks for the response! 👍

[@hexu3230]

Thank you sir, good video very well explained. parts store where closed and I needed to remove thanks keep up the good work

[@southtownloc_beats_4277]

Hopefully this works for my old CR!

[@250race]

Heat the case up where the dowel pin is stuck in it with a pen torch this will help it free up. Good videos bud.

[@MichaelSabo]

Good call; this trick hasn't failed me yet, but if it does; heat will be next!

[@AngelFernandez-br7xs]

It would also be nice for you to explain how to clean up the hole where the dowels go (if it’s nasty or corroded

[@ronniewilliz153]

Dremal with a cyclinder stlye wire wheel or reg wire wheel

[@MichaelSabo]

That's a good idea; I will add it to the list!

[@jooeee23]

Thank you sir 🙏

[@peytonmcdonald4442]

Love hacks like this! 🤘🏼

[@MichaelSabo]

Thank you for watching man!

[@worldofmiracleo7614]

Thank you so much

[@CIarkNova]

What’s the trick to rounding them back out, if you tried to pull with needle-nose before doing this method? Mine looks pretty damn round still, I keep trying to use the drill bit as a ‘reamer’ almost, and or a guided to get it in straight, but the one end jusy doesnr wanna go in...

[@melvinholcer4756]

Nice. I've got one that I'm trying to remove from an old quadracer

[@bethgeary706]

Thank you

[@chrisstephens6673]

A good tip but as others have said a little heat helps. Have you seen the channel from Paul X, he is a machinist and repairer who did a video on his particular method of dowel removal. It might be of interest to you .

[@kingman171]

How did you take the counter shaft out

[@MichaelSabo]

I forgot to mention this in my most recent video; I had to heat up up with a torch after it sat in penetrating oil over night. It came out, but it was a bitch!

[@tylerkuske7344]

thx man now a can finish my Yamaha blaster 200

[@jonhathanlinares8252]

Hey I got a question I rebuilt my motor and I noticed I was missing the back dowel pin and I was wondering if I really need it?? Anything really help

[@OperatorASF]

Map torch and vice grips 👌 never failed me yet

[@stevenmann9]

Explain please in current position on vg33e

[@DBC_Racing]

Heck yeah Mike!

[@MichaelSabo]

You sold me a linkage rebuild kit for more than retail. why

[@ronniewilliz153]

You heat them up but the intro was great lol

[@MichaelSabo]

Thank you man haha

[@LiveFreeOrRIP]

I have Never done this. But for some reason i knew what you were going to do lol.

[@MichaelSabo]

Hahaha; thank you for watching man!

[@Greywolfwarrior]

That peach Reign energy drink is the most important thing LMAO 😆

[@MichaelSabo]

I literally have one every morning lol

[@ronaldoquintos1675]

The dowel pin on my engine is solid so I don’t need that trick but they are extremely tight cant even take them off with a vice grip. You got anymore trick?

[@JasonSmith-bu7wk]

The better pliers to use here are knipex 8603150 (smooth jaws) they don’t mare the outside of the dowel pin so you can still reuse them again but the the use of the drill bit is definitely right on

[@justme-ve3oj]

very nice......

[@austinwalls00]

Thanks Micheal Wicheal for that sneaky peaky lol

[@MichaelSabo]

Thank you for always watching my videos Austie wostie!

[@BobKuykendall]

TL;DW: Stick the shank of a close-fitting drill bit into the dowel to prevent it from collapsing, grab it with vise grips and twist it out. Enjoy the nine minutes you just saved.

[@Rhodesian_FAL]

I use a slide hammer dowel pin removal tool. There’s never any fuss and the dowels always pop out.

[@offroadworks3653]

Hell yea man !!!

[@sweetones2385]

What if you have a broken bolt in the locater

[@THIRSTYGUMS]

Great! Would never have thought of that. Just the tip I needed

[@leehuntley189]

Will you be buying blind hole puller soon? They are cheap on amazon

[@MichaelSabo]

Blind bearing puller for bearings; yes!

[@leehuntley189]

Just a thought....saves dowels completely!

[@kevinpazos9846]

Hopefully I won't need it, but the video was very helpful.

[@usmcchet1]

good video brother little short lol. Just one thing if someone is rebuilding a motor and is strapped for cash and cant afford new dowel pins they have no business tearing down a motor.

[@MichaelSabo]

Hahaha, that is very true. Thank you for watching man!

[@bv1199]

That’s you opinion I’m rebuilding my engine on a budget

[@ROD90265]

Heat up the Case with a torch for about 20 seconds not the pin... Aluminum will expand faster than the Steel and pin will come out much easier

[@JoseMartinez-wt7qp]

How do you re install them ? Just bang them in with a hammer?

[@rosinsautofab1956]

Good way to screw up the case mating surface, fill the hole with grease and hammer the drill bit in with a dead blow…. Hydraulics friend

[@loganwillis8158]

Reminds me of the guy from flex seal lol😂

[@MichaelSabo]

Hahaha YES! And Billy Mays

[@josephlambert9419]

This man 2 vintage said in his video where he was racing a 50cc bike and a Moto 4 and he said the Moto 4 which is 80cc he said his moto4 goes 43 mph my neighbors 300ex tops out at 49 he is crazy

[@MichaelSabo]

That dudes not really on the same page as anyone else it seems.

[@dannyboy4536]

Call dibs on the first offer when you ever decide to sell the build.

[@alanhorton1611]

Skip to 5 minute mark where he actually does what you came here to see.

[@moto_tech_braap_itout9852]

Its friday wheres the new video ?

[@MichaelSabo]

Posted a day late; my bad!

[@HorsepowerHouse]

Video is 9:20 longer than it needed to be. Ugh

[@moto_tech_braap_itout9852]

👍

[@syafiqaiman3548]

4:00 Thank me later

[@mostlyhondas7256]

No dislike button so Ill bitch here. If someone is watching this they know what a dowel is! 10 minutes to just show your technique.

[@aarontroutman8255]

I thought u we’re gonna get the raw pipe!!????

[@MichaelSabo]

Yessir, I have a raw LED pipe on order; I will be running both on the dyno

[@mshahwally5452]

tHUMBS UP

[@TheSnej3089]

Worst salesman ever if he is trying to sell something lol

[@evaneyeball7953]

First

[@richiemontanez8340]

Can I have a free sweatshirt I don't got no money for it

[@arkman117]

Drop the humor get to your points

[@bobbybailey2244]

Oh my god! Stop talking and get to the subject at hand. This video is informative but way too much unnecessary talking.

[@PedroBackard]

iq + 1000

[@kevinprivet5942]

WHY the long speech, get on with it.