Removing a 2 year old wrap from a hood with minimal issues using Avery
Пікірлер: 73
@setidepp485323 күн бұрын
Worked like a charm! The trick is to be generous with the heat gun, of course, while trying not to burn yourself.
@RealRajaBanks Жыл бұрын
best thing to watch while stoned
@howimade33094 жыл бұрын
GOD THOSE WHEELS SHOULD BE BANNED IN 50 STATES
@maspvt14093 жыл бұрын
but why though?! looks ok to me
@saywhat91586 жыл бұрын
I bet you miss the natural heating of the Florida sun for these large surface removals. Quick tip: Tie your electrical cords like the first part of a shoelace knot before plugging them together and they won't pull apart accidently.
@CKWraps6 жыл бұрын
Miss Florida everyday. And thank you for the tip
@rstezza6 жыл бұрын
Been watching a lot of wrapping videos on KZbin. Never seen a removal. Didn't know it was this hard. Can you do a video on removing wrap from the front fender, mirror and door handle please.
@CUSTOMWORKS7.3PSD3 жыл бұрын
I recently found out if its like 30 degree F or less you hit that viynl with a heat gun it pulls away and its like pulling a fabric sheet off a panel easy as pie
@AndreyBender6 жыл бұрын
Hey Christian, when removing film from large surfaces, the film can be cut into strips of 4-5 inches. In this case, the film is removed without too much effort! Try it;) A note for beginners who read this: It is very important to cut the film without cutting through it!
@CKWraps6 жыл бұрын
Yes I know that but I didn't want to display that when there are so many beginners watching.
@AndreyBender6 жыл бұрын
OK :) That's why I made a note LOL
@Dnasty12 жыл бұрын
The car looks really great for going two years wtihout a wash. Is overheating the paint itself and possibly removing it with the wrap a concern?
@victormiguel9356 Жыл бұрын
I have on my roof 3m 2080 gloss black about 2 and a half years now and it fade because of the sun and i don't have a garage,i hope mine come out good and don't crack in parts.
@phigo4kins4 жыл бұрын
The Wrap doesn't look bad/worn out/faded, Why is the owner removing it? :?
@Brakzillaa4 жыл бұрын
Thats because it is over 2 years old, meaning following the 3rd year the vinyl is prone to cracking and drying out, making it harder to remove and can even damage the paint its meant to protect. Its best to remove the vinyl before the 3rd year, and just put on brand new vinyls.
@randomlybruh3 жыл бұрын
This question has probably already been asked but what do you recommend for harder to remove adhesive? Most folks say goo gone. What do you prefer?
@JonathanDiaz-vm5mb Жыл бұрын
To much goo gone will fuck up your paint it takes it off really easy😢 I learned the hard way
@Eddy-iv3qv2 жыл бұрын
Thank you for the info, wrapping is definitely expensive than painting.
@AmitThakorlovemeorhateme2 жыл бұрын
when you apply the vinyl wrap, to cut the vinyl when you apply it, do you use sharp knife to cut it into shape cut off all the edges? wouldnt that cut into the metal and the paint?
@brandonsozomenu45186 жыл бұрын
Hey Christian, you think you can make a video on how to just do a roof wrap. A lot of do it yourselfers would benefit from one of those videos i think. awesome videos though dude, youre the man
@Uniquetransition6 жыл бұрын
GiveMeMyFlops especially one with a sunroof
@CKWraps6 жыл бұрын
I've done both, if you scroll back through videos you'll find them
@brandonsozomenu45186 жыл бұрын
Sounds good dude, thanks!
@GamerNxUSN4 жыл бұрын
Would a hot car in the sun help or hurt when trying to take off?
@TheBadtobeblown6 жыл бұрын
Not sure if I missed it, but what colour is/was that? Great video!!!
@daveknapp20003 жыл бұрын
I would like to see a removal and re-wrap of a window moulding. eg. the pillar between windows.
@mopheousredpill74623 жыл бұрын
Why do people wrap their cars is this an alternative to paint?
@AK-ui1zl3 жыл бұрын
We like to heat the panels with our infrared heat lamp. Allows us to use both hands
@bevmcmullan-kungl80896 жыл бұрын
Wow, that's some workout, Christian. You don't need to go to the fitness center after unwrapping this car.LOL
@MeepMeep886 жыл бұрын
Lol maybe just get one of those garage work ceiling heaters pointed right at the wrap
@alexzanderellis5473 жыл бұрын
not sure if you guys gives a damn but if you guys are bored like me atm you can stream all of the new movies on instaflixxer. I've been binge watching with my brother for the last few weeks xD
@jacobyalfredo57403 жыл бұрын
@Alexzander Ellis yup, have been using instaflixxer for months myself :D
@austincannan62646 жыл бұрын
Hey christian, could you do a video on prepping this car for its next wrap? Im about to peel my car and wrap it again and I really dont want to leave any adhesive behind as it will show through the next color.
@ElsaMason16 жыл бұрын
Hi Christian, u mentioned ceramic coating the wrap. Does that process harden the wrap? If so, does it make removing the wrap difficult? Love ur videos btw ...keep them coming...
@CKWraps6 жыл бұрын
It shouldn't actually make the wrap more difficult to remove. I'll be removing mine in a couple of weeks so we'll find out soon. Mines been installed for about 4 months and with the coating on it
@josephkrause52905 жыл бұрын
I just removed the factory stripes on my mustang. They were on the car for like 10 years. How do I remove the residue? Soap and water? Clay bar? Or alcohol?
@ezra92563 жыл бұрын
I know this is a two year old comment but just use goo gone. Clay bar will be ruined after the first few swipes
@Arden28862 жыл бұрын
That looks sick, I would have just taken the wrap off the hood only left the black hood
@Marty480345 жыл бұрын
I'm guessing this removal gets harder if the wrap is on longer? Buying a police car with the doors and roof wrapped. About 7 years.
@timothyhubbard54124 жыл бұрын
How much would it cost for a full car wrap removal? Ball park for a Nissan 370Z
@michaelturner76413 жыл бұрын
The problem is how do you make a product that is durable stays where you want it and then is easy to remove, you can't it's not possible at this point in time hopefully the future will be and this vinyl doesn't last very long.
@romeole403 жыл бұрын
How do you remove adhesive residue from the car safety??
@Change_this4 жыл бұрын
Question... Does the adhesive from the vinyl wrap damage the car's clear coat?? Or after removing the car I assume I would need to clay bar the whole car when washing back....
@NyBasim914 жыл бұрын
I'd say it's a case by case thing, also depends on the strength of the glue used in the vinyl. The vinyl i used did remove some of my clear coat when being pealed. Granted my car is also 20 years old and it was the original clear coat paint Edited: to fix typo
@Change_this4 жыл бұрын
@@NyBasim91 yeah.... I was wondering about that, I'll just have it painted instead.
@norcalwraps93824 жыл бұрын
No it will not. It’s just adhesive. I’ve removed wrap off of a van from over 8+ years of it being on and all you need is a bottle of heavy duty adhesive remover to remove all the glue
@jetskijay19553 жыл бұрын
My Avery wrap lasted 3 years 6 months garage kept in Arizona with occasional outdoor parking. Disappointed tbh!
@CKWraps3 жыл бұрын
That's pretty good considering they don't offer any warranty in Arizona
@ferdiegemen6 жыл бұрын
I know it's out of topic but please please please pleeeeeeeaaaassssseeeee tell me the song name that you used in the beggining :)
@Dc5_henry6 жыл бұрын
When you wrap over inlays, do you use knifeless tape or do you freehand the cuts?
@theamazingballersadenandli42974 жыл бұрын
How much do you charge to unwrap a whole car
@AZTECPRIDELOCOS4 жыл бұрын
Hey man im a fan , question how much a job like that would cost for a toyota camry Se 2018 like gray metallic wrap the whole car
@AZTECPRIDELOCOS4 жыл бұрын
MICROSOFT HQ 😂😂💵💵💸💸
@tazzicek3 жыл бұрын
looool why u drive shitbox like that? its your parents ride?
@Eroxslabin5 жыл бұрын
What was the name of that heat gun company
@zkzk915 жыл бұрын
What is the brand of the wrap that has been used for his BMW? please let me know
@ripmatek4 жыл бұрын
What was the brand/color name of the matte white vinyl?
@DJJAW115 жыл бұрын
I have a Corolla,with some part wraps on her (i brought, it as so). Is there anyway of knowing,if its indeed a Quality 3M wrap etc?.
@808G8GT5 жыл бұрын
I removed my 3 year old roof wrap in the 90 degree hawaii sun....super easy. Came off in 1 piece. Key is wait until mid day. No heat gun needed. Of course this depends on the quality of the wrap also. Not chinese cheap ass wrap.
@TBInuYashaX5 жыл бұрын
I just filmed myself removing one with cracks that was on for 4 years...
@Ninja-qr8qp4 жыл бұрын
Put all videos you want this thing is impossible to do just lost 300 $ trying it, doing this at a shop is too expensive
@RealSpit6153 жыл бұрын
What about hard to grab spots
@JonathanDiaz-vm5mb Жыл бұрын
Looks like the hood is taking a beating and bending a lot 😢
@obgaming101 Жыл бұрын
Dude should have closed it properly.
@pgarcia1286 жыл бұрын
👌👍
@andrewrae504 жыл бұрын
Quarter panel ? lol A Pillar
@RRD974 жыл бұрын
It is a very wrong way, you are destroying the bonnet joints.
@MyMomSayNoDota6 жыл бұрын
condition like this call dirty..? im not sure what my car condition will be call... Some suggestion. take off your ring before touch your customer's cars.. obviously people wrap their car because it's expensive (to them). so by removing your ring, you show your respect to their car (plus remove their worries you scratch them. lol)
@solucky70 Жыл бұрын
It should be against the law to put that on a car!
@xinthedirt6 жыл бұрын
didnt wash their car? Not even once? What a lunatic
@josephkrause52905 жыл бұрын
I just removed the factory stripes on my mustang. They were on the car for like 10 years. How do I remove the residue? Soap and water? Clay bar? Or alcohol?