Removing SU Carburetors - 240Z Carburetor Guide Ep. 2

[@rainbowdashieness]

Thanks for making this video. Tryin to get my moms old 240 goin again after sitting for 12 years. All without her knowing. Should make a great supprise for her.

[@zcarguide]

Wow, that’s one of the best things I’ve heard all year!! Thanks for commenting. Please let me know how it goes and if I can help at all.

[@rainbowdashieness]

@@zcarguide I have stumbled upon an issue. No spark. If I ground the negative side of the coil there it's spark, but not when actually cranking. I think the issue may be in the distributer. If I remove that to clean will I screw up all the timing?

[@zcarguide]

@@rainbowdashieness I do think you will have to reset the timing after rebuilding the distributor. Wish I had good info on that but I have only disassembled one in one of my videos for the L24 rebuild.

[@TheSaturnV]

Just stumbled on your videos. I'm going to use them as a guide to getting mine back together, since they came completely torn down in boxes! Thank you very much for posting, and I don't understand why you don't have several thousand subscribers.

[@zcarguide]

Thank you! Great to hear you are finding the videos helpful.

[@aldenjamal5637]

I know I am pretty randomly asking but does anyone know of a good place to watch newly released movies online?

[@jedidiahpablo4311]

@Alden Jamal Lately I have been using flixzone. You can find it on google =)

[@josephchristopher4347]

@Jedidiah Pablo Yup, I have been watching on FlixZone for since march myself :)

[@tedrubinstein1213]

I watched your video and the one part I wanted to see was what size are the nuts that are holding the carburetor on the manifold and how did you remove the bottoms ones. Very hard to get to.

[@jpearce648]

Awesome helpful video! Thank you!!

[@jesseescobar4354]

At 5:03 you remove a hose from the manifold, this might be a dumb question but what is that hose?

[@zcarguide]

That is the PCV hose, it goes from the engine block to the PCV valve on the balance tube (where you see me removing it from)

[@rubber6591]

Bro you just saved my life

[@nismo300zr2]

XD you didnt show how they come apart! i only want to take off the rear. do they just slide apart from each other?

[@zcarguide]

Because the way the linkage is installed, I believe you have to remove them at the same time as shown in the video. Also, this is a video in a series I did on carbs, the next video shows the disassembly, cleaning, and rebuilding process: kzbin.info/www/bejne/boirfGWefdOBmKc

[@gregocabaliero752]

Podría conseguir esos manuales en Español, si alguien los tiene me vendrán bien