#Renault

#Renault #captur #SOS #warning #message instructions of have to rectify fault thanks for watching don’t for get to hit the subscribe button on the way in and like the video if you found it useful.
www.bygeniescr...

[@Heleje1]

Cold you explain what does it mean "reprogram" ? Initial state ? Or update telematic module ?

[@g_a_bofficial]

I means that you have to tell the vehicle you have changed the telematic module and program it to the current software for the vehicle so that the ecu can communicate with the module

[@deans6571]

Why the hell is the battery buried in SO deep into the dash?!

[@g_a_bofficial]

That’s something you would have to ask the manufacturer

[@tomasyt888]

how did you enable multisense on small easylink is multisense for big easylink

[@ttomaszek77]

I have an ELM327 and Renolink interface. Can you tell me what parameter should be changed and in which module so that the message disappears after replacing the battery?

[@g_a_bofficial]

It’s not as easy as that

[@jean-pierreabdullah6383]

Good morning It's really useful, but how you make to clean the message " sos call" ? Wiche machine you used in your very good demonstration? Many thanks

[@g_a_bofficial]

You will have to take it to your local Renault retailer

[@g_a_bofficial]

It’s called clip and I has to be done by a Renault technician with access

[@arkadiuszstefaniak3116]

Hi, where did you buy spare battery, and that's the part number of it ?

[@g_a_bofficial]

You have to get it from Renault however the light will still stay on because you don’t have the right diagnostic machine to do it so it’s best you have them carry out the work so it’s done properly

[@ttomaszek77]

Hej. Poradziłeś sobie z tym komunikatem? Wymieniłem baterię ale nadal nie wiem jak przeprowadzić konfigurację i tak naprawdę którego modułu.

[@arkadiuszstefaniak3116]

​@@ttomaszek77hej, u mnie skończyło się w serwisie renault. Ale ku mojemu zaskoczeniu był to błąd oprogramowania a nie bateria. Podłączyli diagnostykę, 5 minut i po sprawie😅.

[@user-ph7ue5ex8t]

⁸

[@tomasyt888]

how did you enable multisense on small easylink isn multisense for big easylink

[@tomasyt888]

how did you enable multisense on small easylink isn multisense for big easylink