Renault Clio 2 door Scenic MK1 Window regulator repair works leve-vitre coupe

Renault Clio MK2 (2 doors) and Renault Megane Scenic MK1 front left door window regulator reparation works. Parts used in this set can be purchased at:
www.windowregulatorshop.com. Worked on 7700842246.

[@andrewhirst3053]

Are you sure this is correct as I can’t get the spool back in as you show as there are two springs in the white housings that slot into the motor plate. Am I missing something?

[@molicgn7291]

1000 thankx !!! I habe just repair mine with your helpfull video!

[@FOUADDZ]

بارك الله فيك اخي الكريم ، لقد اعنتني كثيرا في حل هذه المشكلة بفضل هذا الفيديو

[@moyrml]

Will i need to calibrate the motor and the rail to,say, down position or up position?

[@charah.7842]

Hey! What is the name of the yellow guide that holds the window in place? With thr clip?

[@sahaty]

very useful. many thanks.

[@Ben2410.]

left with to much wire howany time do u put it round the spool

[@NicoMugnolo]

which is the measure of the steel cable on both sides

[@skybenable]

thanks a lot, helping a lot watching this. Didnit know that the circle gallet could be disassambled from the stand. Now it's done, I try tomorrow on my broken window

[@2kmalo]

Thanks!

[@lollipopkhafan]

hi there i just fixed mine but it seems i did something wrong as when i press the button down window goes up and when press up it goes down. i would appreciate if you could help me with that? thanks

[@AhmedAhmed-fo3ep]

Thank you

[@jijisherazad1844]

Hello and thank you for your video but I do not see how you fix the white strip, I mean in what direction because on your film we do not see sufficiently this level. Can you at help me so I know how to fix it? Thank you

[@sixdegreesbmx]

For a Clio this is incorrect. The metal bar should be facing curve down with the motor plate legs facing up (as per video). The Motor goes behind the door, bolts poking through, and the runner bar curves inwards, clip facing away from you. You need to reverse the bar and cables Pause at 2:46 and you'll see what I mean.

[@phillipbarber6222]

I wish I read this comment 2hrs ago.... king thing won’t go back in the door, let’s hope it doesn’t take as long to put it back together the right way around. Grrrrrr

[@ronidavey]

Surely once you've finished the motor bracket is the wrong way round? Also was the the left or right door reg? The screw holes for the glass holder and the bolts the fix the motor to the door are opposite when you've finished?

[@emdpartners5804]

Yeah its wrong

[@csaboss]

bloody hell, sure its wrong!

[@mouradbousselmame1585]

i want to now how long the cable please. ...?

[@fatihayar365]

Thanks 🙏🏻🙏🏻🙏🏻

[@marvstore]

Short one needs to connecting to bottom of the rail once installed

[@walidmans6093]

Hi, I have same problem for my car do you can fixed?

[@yakubo6025]

2 mistakes 1. The metal bar with the 3 plastik clips Have to be on the back site so the 2 holes for the screw look at you 2. The short side hast to be wrapped an the other side

[@callumconnis9523]

This seems back to front

[@raultog]

I cant see wich One of the two cables is the long One. You move toooooo fast.

[@wahidcirta2534]

👍👍👍👍🎉🎉🎉

[@NicoMugnolo]

?