Renault Clio heater fan/blower not working on some speeds - How to diagnose and repair DIY

[@jankowalski5695]

You take out the radio display and you can remove the resistor plug there, there is about 10 cm of space.

[@Tempest10]

Hi nice video, but is it possible to change the Resistance with the cable without cutting the wires ? I bought the resistance and it came wirh the full cable.

[@PerfectingCars]

Hi, It really depends on what type of connection you have on that new resistor, but if there are no connection on new resistor, sure you will need to cut the wires from old connector in order to connect your new resistor without the connector.

[@unotratanti6650]

A hero. A Legend.

[@mv7844]

Please, renault scenic 1,6 automatisch. Wher is the blower?

[@ennisdelmar807]

My fan makes noise when I turn it on but then nothing. I've seen videos where they go in from the glovebox and look at the cables as well, does it matter?

[@PerfectingCars]

Maybe fan is "rubbing" on something, or fan itself is loose or bad, or something else is loose then when vibrating causing a noise.

[@lupobarro7091]

Hi!! I have thw same car. I have the hot always ON. My blower works iñ all speeds. Do you know which could be the problem? Thanks

[@PerfectingCars]

I can only assume, having said that I would look into mechanism that is controlling hot and cold air, which is a first dial on clio climate control, then if that is OK see if the wiring and connections to the opening and closing mechanism for hot air is also OK.

[@mostar2023]

Hello, do you know where the resistor is located in a Reanult Captur 2018 ? thanks

[@PerfectingCars]

Hi, sorry I don't know. But try to find some online manual for captur.