Renault megane radio upgrade

[@kyriakostryfonidis5332]

what happens with the two lights of seatbelt and airbag that the old screen had? you enable them to the new screen somehow?

[@AlfonsoGonnella]

Great solution for the pore factory system, will it work in a Megane RS 2016 with the RS Montinor?

[@UsernameGuyThing]

Do you know yet if it works in a RS?

[@Polearmo]

Hi can use to rs250? Thanks

[@lawrence.porter]

Hi, there's the red wire you show and say doesn't have to be connected but there are also another 2 red wires that connect together. When I connect them together I get no power and when I try with the other one I get no power. I had to cut the plug off and wire it to the battery but the canbus doesn't control the steering controls and the passenger airbag light says disconnected. The stereo works fine though.

[@renasshekho6848]

Hello, i have the same car with the sameradio and cabels, i installed the new android screen, everything is working, but there is no sound. The amplifier is not working, and the steering wheel and navigation buttons also not working, can you help me?

[@AdrianWT-j9n]

Hi mate, there's no link in description. Where can you buy it from and also, does it come with a harness? Cheers

[@philipmunro261]

Hi it mentions in video need to connect two wires in loom together but then it doesn't show which ones can you advise please ? and also do you have to connect anything back into the old stereo or everything works from the android only ? Many thanks

[@maani3511]

Hi don't have to connect anything in old stereo, works straight from Android, probably you talking about fan connector which got two wires in it

[@ronsone8373]

I also would like to know if the cd player still works

[@maani3511]

No cd player will works after upgrade

[@shaneboybrown1393]

Hello 👋👋👋,I have a question, computer monitor wire what should you do there ,I can't find any plug to plug in it , anyone can help me with this I would greatly appreciate.are a link of a video also is good?

[@danielneamtu]

Hello, If you have already installed the TomTom navigation system you should remove left air vents and push out the cluster. Once you remove the cluster you will see a cable with a gray connector. You need this connector to connect it to your new multimedia system. I'm in the same situation and I found the anwser in another video. :))

[@maani3511]

Computer monitor wire?

[@raffaelepilato2435]

Which is the link to buy it?

[@haykoyakar1442]

Whats the Modell name of the radio

[@antonyaourtis5702]

Where’s the link to buy it?