Renault Trafic 2014 reversing camera retrofit, to the original Media Nav OEM head unit!

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In this video I will show you how to retrofit an aftermarket reversing camera on a 2014 Renault Trafic, connecting it to the original OEM head unit.
The head unit is the Media Nav, from LG, also fitted on other Renaults...
Retrofit of the Cruise Control:
• Renault Trafic 3 genui...
Reversing camera (NTSC):
rover.ebay.com/rover/1/710-53...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@isalmankhan1]

Thanks Bro😎, for another awesome video, it is always educational to watch your methods of attacking these repairs with such versatility👍

[@LMAutoRepairs]

Thanks! For watching and for your comment!

[@januszderen1253]

You are better than main dealers, I bet they would say "it's impossible", great video as always :)

[@LMAutoRepairs]

😊 Thanks! For watching and for your comment!

[@jessieganaan3969]

You have a fantastic job mate, well done!

[@LMAutoRepairs]

Thanks! For watching and for your comment!

[@stevietheg2580]

Personally I think the most useful part of the video is the fact that the radio only accepts an NTSC signal, that would have quite a few people stumped on why the signal is not showing on the screen properly. Great video as always and very informative 👍👍👍

[@LMAutoRepairs]

Absolutely! Thank you so much for watching and for your comment!

[@jientjai]

I installed a pal one only works with key on but when is started it the camera is going blank

[@richards4456]

Used clip to do this on a Captur today. Worked a treat!

[@LMAutoRepairs]

That's great! Thank you for watching and for your comment!

[@stevehayes6661]

The only limitation to upgrade and retrofitting is imagination and money once you have those in plentiful supply anything else can be accomplished. Awesome video.

[@LMAutoRepairs]

Couldn't not agree more! Thank you for watching and for your comment!

[@tvpcustomsuk2792]

Much Appreciated, lovely clear video 😀 I will share to our group with all these lovely Vans 😀R

[@LMAutoRepairs]

☺ 👍👍👍

[@engeneer_ru5827]

Hi Louis! Great job, neat and reliable! Once, repaired the same Media Nav. At Renault, an assembly in Russia understands the PAL video signal. I look with interest, Denis!

[@LMAutoRepairs]

Thanks... For watching and for your comment! 👍👍👍

[@engeneer_ru5827]

Louis, what is the software version number of the Clip installed in the laptop? Going to buy a Can Clip clone in China. What do you think about it?

[@LMAutoRepairs]

@@engeneer_ru5827 I am still using a quite old version... get the latest one...😉

[@matushodor4725]

Perfect work, thanks for a video 👍

[@LMAutoRepairs]

Thank you for watching! 👍👍👍

[@anassboushabi378]

Well done. Great job😊😊

[@LMAutoRepairs]

Thanks! 👍

[@fuzzs8970]

Thanks for sharing. Really interesting

[@LMAutoRepairs]

Thanks! 👍👍👍

[@herrstoy4766]

Brilliant! Well done! Thanks for this tutorial!

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@jonesben6]

hi what obd did you use please and windows. iv got the red obdlink sx but clip will not find it

[@CarsExposed]

Top work mate good to know 👍👍👍

[@LMAutoRepairs]

Thanks! 👍👍👍

[@CANDiagnostic]

ótimo trabalho amigo

[@LMAutoRepairs]

Muito obrigado! Vejo que andas a aprender umas coisas! Muito bem! 👍👍👍👍

[@jamesross4099]

Bloody brilliant, one thing I am struggling with is removing the glove box? Found two screws but that is it, I need to be able to feed the camera behind the dash. Many thanks

[@LMAutoRepairs]

To be honest, I don't longer remember how it comes off... sorry... But I think there is some on the side, inside and underneath... 👍👍👍

[@danman9017]

wow nice work

[@LMAutoRepairs]

Thanks! 👍👍👍

[@bodgitandleggitgarage]

Nice job mate

[@LMAutoRepairs]

Thanks Leon! 👍👍👍

[@liamtuckett8696]

Hi mate ace video. Can you send me the link to the reno link adapter been looking at some and I'm.not too sure witch is right.. thanks mate keep up the good work 💪🏾

[@mustaphaessahihi1762]

Hi, Louis thank you for the video like always great work. Regarding the pinout of the camera cable "video +12v and GND" in that plug where did you get it?

[@LMAutoRepairs]

Hi Google... found a picture with it... Thank you for watching and for your comment !

[@beluxauto5968]

explained perfectly

[@LMAutoRepairs]

Thanks! 👍👍👍

[@mobreyngambi1052]

Nice one

[@LMAutoRepairs]

Thanks! 👍👍👍

[@blowJobstudent]

Great video as always! Do you know if it would be possible to retrofit the radio unit, ours just has a 1 din radio, which obviously can not display a camera image?

[@LMAutoRepairs]

Most likely yes... You might need the center console trims etc.... Thank you for watching and for your comment!

[@user-ux9oz2se1e]

Great video...... thank you..... A friend have same trafic 2014 with lan5200wr1 navi, do you know if the procedure is the same?

[@LMAutoRepairs]

Probably very similar if not the same... 👍👍👍

[@cultproduct]

Hi, Nice video, Thanks for sharing. Can Maxisys also code this level on Renault or only Clip?

[@LMAutoRepairs]

Don't think was capable of this specific one... Thank you for watching and for your comment!

[@housekamu3969]

Thanks for the video and really informative, could you please tell me which software did you used for coding ?

[@LMAutoRepairs]

Renault clip... 👍👍👍

[@goggsy0]

Hi awsome video.. The question im asking is the slot where the radio goes in is it big enough for a double din radio head unit as the original unit is only single din many thanks

[@LMAutoRepairs]

I did this ages ago... I can't recall now... Perhaps some one else will be able to answer that... sorry... 👍👍👍

[@davidhodgson7890]

Great video I have done a very similar thing but using a wired harness coming out of the media nav (bought on ebay ) but the media nav display is saying camera is damaged or not connected. please can you help

[@LMAutoRepairs]

Don't know what you bought or how you installed... check that everything you bought is in good working order... Thank you for watching and for your comment!

[@majazyoussri5243]

أنت رائع 👍👍👍👍👍

[@4642mati]

Super 👌

[@LMAutoRepairs]

Thanks! 👍👍👍

[@thomasbronts]

Good job!! Nice done. I have the camera in the back mirror. Its not nice but it works. Question, how do you get the a pilar off, i dont get it off for my radio dab antenna on the roof.

[@thomasbronts]

Can you make a video how to?

[@LMAutoRepairs]

All clips... Thank you for watching and for your comment!

[@thomasbronts]

LM Auto Repairs i know i working 2 hours on it and i dont get it off haha. I try everything whit interior spoons.

[@grahamstewart6544]

Hi great video, have you got any links or tips on how to remove the glove box.

[@LMAutoRepairs]

No sorry... but if I recall correctly is not much more than a few screws... Thank you for watching!

[@TheBusby1]

Hi great video, what's the best way to remove the a pillar trim? I'm finding it super hard

[@LMAutoRepairs]

I can't recall now how exactly comes off... But I believe it is just pull out...🙄🤔 👍👍👍

[@codexTu]

Olá LM. Uma pergunta sabes se com o renolink dá para ajustar o limitador de velocidade máxima nos megane 4, Talismán, kadjar etc?

[@LMAutoRepairs]

Olá! Nunca experimentei, mas eu diria que sim... 👍👍👍

[@oasnap]

Great video. Where did you ground the wire for the camera in the back?

[@LMAutoRepairs]

Thanks! I genuinely don't remember now... but any place in the chassis should do the job... 👍👍👍

[@titouan_g]

Thank you very much for this video ! Have you had any feedback on Renault trafic 3 2027 ? The software clip is the same for this generation ? Thanks again

[@LMAutoRepairs]

2027?

[@titouan_g]

@@LMAutoRepairs 2017 sorry

[@LMAutoRepairs]

As far as I am aware, yes...

[@thomasbronts]

He good work!! How did you fit the 12v socket? Do you have a how to?

[@LMAutoRepairs]

Hi No... i have not recorded that... 😔

[@zsoltcsaplar8054]

Fantastic job, Y have a lot of work hours on this, You're a very persistent guy👌. I always have a question for you, Renault Zoe electric car, : R clip 190 detects a bad engine number then can not make connection. I have Bosch KTS350, it's a read the appropriate engine number communicates withis perfectly connected to. The clip does not allow you to manually select the engine code. The clip only makes a mistake on this car🤔What do you think of this error? During installation I copied the old clip interface file to clio 190.

[@LMAutoRepairs]

Did older Clip versions connect ok? Thank you for watching and for your comment!

[@dariusdambrauskas9643]

All you should dogo to this website and get software

[@dariusdambrauskas9643]

You should go in to this website mena.co/ get a software for this radio

[@LMAutoRepairs]

@@dariusdambrauskas9643 The software for what? Would not change to radio from NTSC to PAL.... that's for sure.... Thank you for watching!

[@dariusdambrauskas9643]

@@LMAutoRepairs there is a special software to activate camera on original radio

[@peterprice8393]

Hi , I have a question for you my friend , I have a 2016 traffic sport with rear camera that shown in a stupid position in a rear view mirror even thought I have no rear view out of the van . So just wondering if the signal from the existing cam could be diverted to the radio / Media screen …? And I think you might be the best person to ask about this . Please also keep your excellent videos come too.

[@LMAutoRepairs]

Possibly... If the video signal is the same... 👍👍👍

[@peterprice8393]

@@LMAutoRepairs it is the original camera and mirror monitor that was fitted on the sports version of that year . 🤔 God only knows why they choose to use the tiny mirror monitor when it has an 8inch media screen 😳. But will remove the brake light cam and see if there is any indication that it’s NTSC Or PAL the only reason I can think of for using the mirror monitor.

[@donalhogan4812]

Help! I got the trim off, took the four screws on the MediaNav monitor off and pulled the monitor out. It comes out around 50 mm but not any further. Seems to stick there. I cannot get to the back of the unit. Any ideas?

[@LMAutoRepairs]

It should just slide out... Unless the loom caught somewhere at the back... juggle it a bit see if moves... 👍👍👍

[@wilbertkoskamp5338]

thank you for the video is there no code on these radios?

[@LMAutoRepairs]

Don't think there is... Thank you for watching!

[@pedroMJLB]

Great

[@LMAutoRepairs]

Thank you! 👍👍👍

[@awolmadandy]

will clip be able to program the vauxhall variant? I have the 2018 with upgraded navigation head unit.

[@LMAutoRepairs]

No... Clip is for renault... 👍👍👍

[@awolmadandy]

@@LMAutoRepairs ok, is it possible to retrofit the camera to the vauxhall variant? Guess so as it's the same head unit.

[@LMAutoRepairs]

@@awolmadandy I would say yes... but I have never attempted on a vauxhall...

[@electronic7979]

👍

[@LMAutoRepairs]

Thanks! 👍👍👍

[@anapaulapereira3255]

muito bom video eu telho 1 radio 2 din android xines nao sei ligar no volvo v50 e tudo divrente da fixa iso

[@LMAutoRepairs]

Deve conseguir arranjar um adaptador...😉 👍👍👍

[@Chris-op2hd]

Hi LM, great video! I don't have the software. I've got an NTSC camera and adapter for thr Media Nav unit but I don't have the clip coding software or obd plug. Do you know where I can get the media nav unit programmed to recognise the rev camera? Thanks!

[@LMAutoRepairs]

I believe you can update the unit with a software already with the camera enabled... I remember when I was doing this, found some information about it... Just google it...👍👍👍 Thank you for watching!

[@Chris-op2hd]

Thank you LM. I did this and it worked. I have a working ntsc reverse camera hooked up to the media nav unit. Top tip: you can save yourself some work and buy a video adapter for £4 off ebay. 😊

[@LMAutoRepairs]

@@Chris-op2hd Well done! Thank you for the feedback!

[@jasondavies1701]

@@Chris-op2hd sorry to revive old post, did your camera plug and play in the end with the adaptor lead? Did you need to code nav unit? I'm the same as you no coding experience or equipment. Any help would be greatly appreciated 😃👍

[@croeternal]

Have a same question..?​@@jasondavies1701

[@5ivepillarsofislam]

Where are you based and how much do you charge

[@richardfirestorm5862]

Pls can you tell me where to get the reverse signal from on the van thanks ?

[@LMAutoRepairs]

I have explained where I got it from in this case, 22:00 ... Thank you for watching!

[@parkay3560]

can you link to the cable you mentioned thank you?

[@LMAutoRepairs]

Renolink?

[@andrewshakespeare6268]

Hi could you please let me know what software you used Thanks

[@LMAutoRepairs]

Hi Renault Clip Thank you for watching!

[@soldiers303]

is it possible to do this on a 2014 megane tomtom live?

[@LMAutoRepairs]

Never researched it for car... sorry... But if there is versions from factory that come with it, surely it is possible! Thank you for watching and for your comment!

[@richardkhoza2878]

Lm do you have idea how can I update Benz navigation maps

[@LMAutoRepairs]

Never investigated that... I presume the maps will be out there... but surely some sort of installation key will be needed?🤔 Sorry, as I said I never checked that...😔 Thank you for watching!

[@stevehayes6661]

Google and a keygen are required spend 30 minutes on Mercedes forums and you can find what your after.

[@pedroMJLB]

As linhas não mudam rodando o volante porque provavelmente não fizeste a calibração na Clip. Tem lá essa opção...

[@LMAutoRepairs]

Possivelmente... Eu não sei se dá em carrinhas sem ESP... já que estas por princípio não têm sensor the ângulo de direção... Da próxima vez investigo isso... Obrigado pela dica!😉

[@pedroMJLB]

@@LMAutoRepairs todos têm ângulo de direcção, até o meu clio dci85 de 2006 tem e não tem ESP 👍

[@LMAutoRepairs]

@@pedroMJLB Possibly... Thanks!

[@richardbrown8427]

Hi did you use a normal obd2 plug in for that software or something else. Many thanks.

[@LMAutoRepairs]

This.... rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FInterface-Obdlink-SX-USB-Renolink-1-83-Official-Ddt-2000-Multidiag-Renolink%2F223682136268%3Fhash%3Ditem34147e88cc%3Ag%3AqqwAAOSwHxRdjLC1&campid=5338344466&toolid=20008 Thank you for watching!

[@richardbrown8427]

Cool thanks for that. After watching your cruise control video I've done the same to my van. Many thanks

[@richardbrown8427]

What software did you use to code the camera. It looks like it said clip?

[@LMAutoRepairs]

@@richardbrown8427 Yes... clip will also find the job... 👍👍👍👍

[@richardbrown8427]

Have you retro fitted a light and rain sensor for a 64 trafic

[@1988jimbob]

Do you know if can be coded with renolink?

[@LMAutoRepairs]

I would guess it can... but I never tried... Thank you for watching!

[@waynebutler9799]

hi what cable do you need to be able to connect to the diagnostic? thanks

[@LMAutoRepairs]

In this video I was using clip... Thank you for watching!

[@waynebutler9799]

Ok but I thought clip was the software but which obd2 cable did you use the 1 that connects your laptop to the Van's obd2 socket. thanks

[@LMAutoRepairs]

@@waynebutler9799 Again, clip... Google renault clip vci...

[@waynebutler9799]

@@LMAutoRepairs ok sorry i miss understood i just thought the software was called clip. do you need a clip to be able to connect or can you just get a cable that will work, thanks

[@LMAutoRepairs]

@@waynebutler9799 Clip software is for the clip vci... There is other cables for renault, which uses other softwares... 👍👍👍

[@blazevicstanko6109]

Hi, I downloaded CLIP V226, but it doesn't work on my PC which runs on Win 11. Do you know any solution for win 11 ?

[@LMAutoRepairs]

Laptops are dirty cheap nowadays... Just get one and install a fresh supported operating system... 👍👍👍

[@blazevicstanko6109]

@@LMAutoRepairs Thank you for the answer. The mine is not dirty cheap, it's brand new and runs on Win11 64bits. Nowadays laptops are allways 64 bits. I see that CLIP runs only on 32bits systems. Is it right ?

[@LMAutoRepairs]

@@blazevicstanko6109 I was not saying that your computer was cheap... What I said is, you can buy a used cheap laptop just for that... 👍👍👍

[@blazevicstanko6109]

@@LMAutoRepairs Sorry, I misunderstood the answer.🥴 I will try your solution then. By the way, I tried on a Windows XP running on a Virtual Machine on my laptop, and I got the same error : CLIP did not accept Win XP. What system are you using ?

[@LMAutoRepairs]

@@blazevicstanko6109 I am on XP... but I am still using an hold version of clip... But I believe newer versions of clip need win7... or something like that... Do a bit of research and you will find it...

[@osrc22]

Hi what colour is the reverse light wire?

[@LMAutoRepairs]

Can't remember now... 🤷‍♂️

[@osrc22]

@@LMAutoRepairs lol no problem cant seem to find them any where

[@joes6088]

Yeah, al the stuff your saying is not worth watching are exactly the things I wanted to see, removing the trim, conduit , running the cable etc.

[@LMAutoRepairs]

I tend to skip the basics... Sorry if was not helpful... Thank you for watching!