Renthal R-Works FatBar 36 Dirt Bike Handlebars

[@stephenvincent2997]

Will I be able to use a throttle tube with bearings? I know the Works Connection tube with bearings advises not to use their tube with this bar. Also, most tubes with bearings add to the length of the bar, where Renthal advises not to make any mods to this bar(cutting bar end to make up for added length of bearing).

[@benfairhall5331]

It’s shame they didn’t come out with a big single piece clamp and totally eliminate bar twist but nice product for sure! Can’t wait to see what else makes its way into this R-Works line!

[@rmatvmc]

I'm in the same boat. I wish I didn't have to give up my one piece mount from Ride Engineering. - Chase

[@JamesJohnson-wo2nn]

How big are the clamps overall? Are they the same sizer bigger clamp overall? Wondering as for bar pads that have a 55mm cut out width if they will fit.

[@rmatvmc]

The bar pad cutout should be very close. The clamps ID is larger but the outside is basically the same size.

[@rmatvmc]

They should fit fine with a standard renthal fatbar pad.

[@rickmanley767]

Thirty something percent weight savings is what, like 2 ounces?

[@troymason3098]

With the fat bar 36 what is the standard size I should get far as Bend

[@rmatvmc]

Handlebar bend is rider preference. They have this bar in several options. Best thing to do is look at the sizing chart (on product page) and look at the options. Do you know what your current bar bend is? That will help you know which to get. But if you're not sure what your current bend is, we can help you pick a bend that is good. How tall are you?

[@troymason3098]

Rocky Mountain ATV MC my Height is 5’5 and my current handlebars are Standard seven eights. But I like this fat bar 36 lol

[@cowpker4life333]

anyone have issue with clamps cracking where mounts to triple clamps? one mine has had crack on the small tabs that hold the bar straight.

[@micahhook3576]

Are all fatbars 36mm? Thanks

[@rmatvmc]

No, normal oversized bars are 1 1/8" or 28mm. The FatBar 36 bars use a bigger clamp that will only work with these handlebars.

[@micahhook3576]

@@rmatvmc thanks. I have some regular fat bars and i found the right mounts now. Flo makes some nice cheap ones

[@randyreynolds6508]

Doesnt matter. They are still rigid. Pro taper evo has the most flex out of any traditional handle bar.

[@dirtbikesicehockey4788]

Thanks for the review but this is out of my league.

[@bradleythomsen3083]

Torsional strength increased by 59percent, so they are 80% as strong as pro taper? Just BSing. My knees don't allow me the ability to learn bar strength. If they bend I'm dead.

[@nickpeccarelli7593]

3:35 has the vent hose the wrong way