REP PR-5000 V2 Raw Cut Review

This video is meant to showcase a very raw unfiltered look at the REP PR-5000 v2.
The REP PR-5000 v2 is the most innovative power rack to arrive on the scene... with the garage gym guy in mind, but having features unheard of in a single power rack at any level. This 3x3 11 gauge steel rack with 1 inch pins, makes this an absolute tank of a rack at an amazing value. A centerpiece for any garage gym or D1 training facility.
Visit: www.repfitness...
Call: [phone]
Email: [e-mail]
Instagram: / repfitnessequipment
Facebook: / repfitness

[@BasementBrandon]

Usually can’t say nice rack to someone but it’s fitting here!

[@REPfitness]

Thanks Brandon!!

[@noseeb]

Review on this bad boy???

[@REPfitness]

@@noseeb Thousands of people own this rack and love it! Check out our instagram page where we highlight a lot of customers home gyms, PR-5000's, etc. at the top of our instragram page there are those little circles - click them and check out all the racks!

[@MohammadDakkak]

Love it. Wish I seen this before purchasing my rogue rack. Definitely getting the rest of my equipment from y’all, especially as someone who lives in Colorado!

[@hollywoodjack2950]

Wow.... I glad I found this video since I'm looking on buy my fisrt rack. I feel confident to say this is going to be my fisrt and only rack I will need for a long time !!!

[@kouchiseiyaku]

This and the new REP Power Bar EX might win me over compared to what Rogue is currently offering. You guys need to stock up on weights. Planning on buying this around next month hope all the things I want are restocked by then.

[@REPfitness]

Someone just ordered this exact set up minutes ago and added the AB-5200 adjustable bench too. Absolute killer combo.

[@johnnygunzfilmbuff7821]

Once this comes back in stock I'm going to buy this.

[@westleysynthwave1216]

Thank you kindly for the prompt response! I really appreciate you imparting the details of the option that I could consider if I were to forgo bolting the rack for stability purposes. I will eagerly be purchasing this rack from your company within the beginning of the new year. Again thank you very much I truly appreciate it and have a wonderful day.

[@REPfitness]

So glad that we could help! If you need assistance with your purchase or have any additional questions, email will get you the quickest response: [e-mail] :)

[@mikejensen1473]

I wish the rack builder program would allow multiple leg pads and the drop in dip bars -- be able to purchase through out reps catalog . Include weights and a bar in the rack builder option. I’m pulling the trigger on a rack soon and see a paper list and a phone call happening vs the builder program with the flexibility of your racks.

[@peterharris6223]

I want to buy a house just so i can buy something like that

[@zairnaim93]

Same, for the first time in my life I have a desire for a garage /basement

[@shellderp]

same lmao

[@srt8up4shot]

Facts

[@panagiotistsakiris8077]

FANTASTIC POWER RACK !!! kudos to rep !!!

[@REPfitness]

Thank you!! Are you adding the V2 to your home gym?

[@georgeg.3853]

That multi-grip pull-up bar is genius. Gonna get it for sure. Hope it’s compatible with my Rogue R-M 4.

[@REPfitness]

Another unique feature with our rack is the width - a major complaint was when racking your barbell on competitor's racks... the tolerances are too tight when loaded up with plates causing a lot of people to have to be too careful when re-racking or hitting their plates throwing them off balance. At 47" width, we've solved this problem. Unfortunately means that width dependent accessories are not cross-compatible, like our new patent pending integrated belt squat attachment.

[@georgeg.3853]

Rep Fitness many thx for the response!

[@mr_mars_vr]

Anyone: I want a... Rep Fitness: Yes.

[@REPfitness]

We love hearing ideas from our customers! Hundreds of new products coming out this year and next!

[@onestalker5150]

Awesome setup!

[@DanesinTexas]

Looks very solid👊...when is it available on ur web site?

[@REPfitness]

Available today! Here is the link: www.repfitness.com/pr-5000-v2

[@DanesinTexas]

Rep Fitness very Nice.. deciding between this and the RM6 2.0. Is it possible to do 48/30 for the cross-members instead of 48/16?

[@REPfitness]

@@DanesinTexas Yes, the rack is customizable and we have both 48 and 30 inch cross members. Give us a ring or shoot us an email with your ideal setup - [e-mail]

[@Habitual_Liar]

FYI for anyone thinking of buying the standard J-Cups. The new ones DO NOT have UHMW on the bar contacts as shown in this video. They now have a cheap piece of rubber that is barley hanging on by one screw. I know because I just received mine in the mail and was less than impressed.

[@REPfitness]

Hey JS - this should not be the case. Please email [e-mail] with photos and your order information. We will fix this quickly. Thanks

[@Habitual_Liar]

@@REPfitness I was already told that Rep was trying out a new design and that that's just the way they are. I was posting the information so that other people considering buying the standard J-Cups know what they are getting since its not described like that on this video or on the website. The standard J-Cups have have UMHW on the area of contact for the uprights but the bar contacts are rubber not UHMW. Not a deal breaker, just information.

[@westleysynthwave1216]

I have a question for one of the Rep Fitness representatives. Will you at any point in time be making a flatfoot base version of this upgradeable style rack? Just out of curiosity due to the fact that I just recently saw the garage gym reviews thorough assessment of the stellar fitness masterpiece and that review has seriously prompted me into buying my first rack from Rep Fitness within the next month or so. Thank you for your time and consideration I look forward to hearing a response soon.

[@REPfitness]

Hi Westley! Great question. As of right now, that is not something that we have on the horizon. However, the front foot extensions and rear base stabilizer would be a perfect alternative because they help improve the stability of the rack when not bolted down (which is the main benefit of a flat footed rack). Those attachments can be found on the page for the PR-5000 V2 (www.repfitness.com/pr-5000-v2). Hope this helps!

[@snilloconator]

I think you need to send me one of these to test the limits in my garage gym. Plus the color scheme matches my garage. LOL and J/K Really nice loking equipment guys.

[@Jesco93]

What is the difference between a power rack and a squat rack?

[@DanesinTexas]

7:30 old version, right?

[@REPfitness]

Good eye :) yes that bolt pattern was from a quick cut edit of the rack in the showroom that had the attachment on it.

[@DanesinTexas]

Rep Fitness 👍 we r in the process of saving up for this bad boy 🔥💪

[@REPfitness]

@@DanesinTexas Glad to hear it! Let us know if we can assist with anything! [e-mail] :)

[@marklemerond8910]

Shown is this video is it the 30 inch or the 41 inch option?

[@codysanford1988]

Regarding your dip attachments, I saw 2 different ones. The horn version and the other which is 2 pieces. Which is your favorite and why?

[@REPfitness]

The 2 piece one is because of the added stability and ability to use it with the cable attachment for weighted dips.

[@maximusnotsure8282]

I don't need it.....I don't need it......I definitely don't need it.......IIII NEEEEEEEEEEEEED ITTTTTT

[@S7ANL3Y79]

Amazing machine

[@samk4761]

I have 96 inch high ceilings and am looking to purchase the 93 inch version. Would you be able to tell me how many more inches would the multi-grip pull up bar add to overall height once secured to the rack.

[@REPfitness]

It adds 1". Check out the dimensions photo on the PR-5000 page - it's the second image in the slider of images and has all the attachments and options and how they change the rack dims.

[@TheJuan2000164]

I wanted one of these so bad but they’re never in stock but I can weld and have 2x2 inch 10 gauge still in the back yard so I made one I hade 6 foot 1” still rod and and used it had a safety pin I going to buy 2x2 Jcups and I have a rack the hardiest part was drilling 1” holes that Match but with a drill press I got it done I’m going to see if in a year things are back in stock sale my rack and buy this then looking to 2022 🤞🏽

[@REPfitness]

Talk about some DIY! Just as a heads up, the PR-5000v2 is in stock right now! It depends on the exact configuration you're looking for but check it out at www.repfitness.com/strength-equipment/power-racks/pr-5000-series/pr-5000-v2 and if you have any questions, email us at [e-mail] and we'll help you out!

[@Oni4Life99]

How much is everything in the video with the rack?

[@leozilla2374]

how much for the whole set up?

[@REPfitness]

Pricing will depend entirely on which height and depth combo you choose, along with the color and attachments, types of weights and bar you choose. The best part of this rack is that it is completely customizable. If you check out the site, you can build it how you want it! www.repfitness.com/pr-5000-v2

[@jjpaul255]

Will rogue attachments fit on this? Ex. The rogue monster hip thruster?

[@DanesinTexas]

JJ Paul different width so that won’t work for that specific attachment. Will the jhooks work on rogue racks?

[@DeusExMachina50]

How is this different than the Force USA MyRack?

[@REPfitness]

Hey! You can check out the specs on the listing page and compare to see the big differences. :) www.repfitness.com/strength-equipment/power-racks/pr-5000-v2

[@clucero1986]

I currently have a 4 post rack. How can I order the extra posts and cross members?

[@dashriprock5720]

Is there a sectorized stack available for the late pulldown?

[@shark3939]

I hope your website is open for orders on April 27

[@rambojohn7118]

I’m waiting for my PR-4000 rack with Lat Pull Down to ship. Can someone tell me the foot print of the PR-4000 rack I got the 30” x 93” and total footprint of the PR-4000 rack when the Lat Pull down is attached to it. Thanks

[@futbol1972]

Will the rogue leverage arms work with the PR 5000v2? Don't want the rep fitness ones. Lol Is there a short version of this rack, my ceiling is only 8ft high?

[@futbol1972]

The reason I want a short version is because if I buy one I will put it under garage rails which from floor to rails are 85"

[@REPfitness]

@@futbol1972 Hey Marco - we do offer a an 80" version! repfitness.com/products/pr-5000-build-your-rack As for combability with other attachments... it's hit and miss and we can't comment on each and every one. However, we have seen rogue's lever arms on our racks in customer photos.

[@futbol1972]

@@REPfitness I just want the half rack whichused to be the hr 5000 I believe and now I think is the PR 5000v2?? Anyways need the short version half rack but can't fund it anywhete

[@westleysynthwave1216]

I have one more inquiry regarding possible attachments for this particular rack. Will you possibly be considering an attachment similar the Sorinex j-squat attachment and possibly a dual abdominal/Good Morning attachment situated on the inside of this particular rack.

[@REPfitness]

Hi Westley - Another great question! We will have a belt squat attachment available in Jan/Feb this next year! We have a belt squat coming out, as well as an ISO Arm attachment that can be used for belt squatting as well. Check out this link: kzbin.info/www/bejne/hZSWd3eqgbisa5Y

[@Mjwest23]

How can you use the leg rollers for hip thrusts?

[@ColtsNation317]

Great video

[@REPfitness]

Thank you for the feedback!

[@HisDivineShado]

How far back are the bolts recessed in the plastic on the j-cups? Beautiful rack!

[@REPfitness]

The plastic is countersunk to allow the bolt to fit in tightly. It is hard to give you an exact number, but we can tell you that - when tightened - the bolt head is recessed enough in the plastic that it will not interact with the rack. The plastic lining is all that will be touching your rack, so you can expect long term protection. Hope this helps!

[@Arseng9]

I still haven't figured out how to install the landmine attachments....the way it's shown it only swings left to right, how do you install it so it swings up and down?

[@REPfitness]

Check out the big image here! www.repfitness.com/strength-equipment/power-racks/pr-5000-series/power-rack-landmine

[@RobertPaulson87]

Rep Fitness, do you have a distributor in Australia? I'd love to buy some of your equipment!

[@rz5401]

What's the price of a fully loaded rack without that rep badge logo

[@jh-lp7cg]

I built mine today. There are nuts that have a blue substance, I think nylon?, on one side of the nut. There are 2 washers, a bolt, a locking ring, and a nut. Which way does the nylon go? Am I supposed to thread that inward toward the upright, or outward?

[@REPfitness]

Can you shoot a photo of what you're seeing and your order number to [e-mail] please? Our team can help!

[@jh-lp7cg]

@@REPfitness Hi, thank you. I looked up "locking nut" and figured it out. Thanks for the reply.

[@leozilla2374]

fire

[@Retroweld]

I WANT! I WANT! 😍

[@ryanmolloy2895]

Does the 30" depth with no added plate storage need to be bolted to the floor? If so what can be done to avoid this?

[@REPfitness]

We always recommend bolting to the floor for added stability; however, with the 30" depth and no added storage, it is not required that you bolt the rack down. As an alternative, we'd recommend the addition of our rear base stabilizer that you can purchase that will reinforce the integrity and sturdiness of your rack!

[@MonkeyMagic4649]

Any plans for a utility seat for the rack like Rogue and Sorinex have?

[@REPfitness]

Yes, in the works. Along with several other attachments to add even more functionality to our PR-4000 and PR-5000 V2

[@Loading_God]

I have seen a few mentions that you guys might expand to Europe, is this the case and on what timeframe? Then I can cry about spending money instead of crying because of my lack of a home gym!

[@REPfitness]

We want to, and we are aiming for next year. The demand for our equipment in the USA is very high, so trying to meet this first.

[@user-fj2or3xp2c]

What’s really the difference between the pr 5000 and the 4000 is it only the numbers laser cut and what else

[@REPfitness]

Hey JR - there are many differences between them, so please look at both listings carefully. Also, on the listing, there is this link: www.repfitness.com/blog/rep-pr-4000-vs-pr-5000/

[@MattPendergraph]

Awesome looking rack!! I've been on y'all's site multiple times over the past few weeks playing around with different configurations trying to figure out what I want!!!...the possibilities seem endless!! Question....how do y'all ship these racks? Freight on a pallet? Do y'all have many issues with items arriving damaged or scuffed up?

[@REPfitness]

Glad you like what you see! They are shipped on an oversized pallet to ensure they have the highest chances of showing up looking nice. They aren't tossed around like a typical ground shipment.

[@MattPendergraph]

@@REPfitness awesome!... that's what I like to hear! Thank you so much for the reply back!

[@merritt001]

Does the 5000 need to be bolted to the floor or can it be installed without being bolted to the floor?

[@REPfitness]

If you get the 41" depth and the RBS, no need to bolt down! You can also get the weight storage and the lat pull down low row cable system on a 30" depth and that would help a lot as well to ensure you don't have to bolt it down.

[@fadhilseptiawan2476]

I'm surprised with some of the negative reviews. I was so impressed with the kzbin.infoUgkxMwYg0MOXR4M-oGeyBsNSYe1aPOUoRH6D cage that I got the lat pulldown attachment that goes with it. It is equally outstanding. I don't have one complaint other than putting it together is a job. The instructions and packaging of the parts are very well designed and organized. Also, I stripped and damaged the pull down cable the first day, admitting it was my stupid fault, and they quickly replaced it at no charge. I'm 6'5, 280lbs and fit in the cage just fine. Glenn B

[@jaypaul7358]

Like106 here👍 looks great. Will all gear/attachments like pull-up bars and utility bars be available for individual sale online? Ex, If I want to add extra pull-up bar after purchasing the rack? Seems I can only buy one pull-up bar, or only buy utility bars if I buy the rack.

[@REPfitness]

We do have the individual attachments available for purchase! Here is the link for the utility horns: www.repfitness.com/pr-5000-utility-horn-v2 If you do not see something on the site that you wish to have as an attachment, you can always give us a call or send us an email and we can put a custom quote together for you! [e-mail] or 720-420-1731 :)

[@michaelmj1670]

Is this available in Europe?

[@REPfitness]

Not yet! Sign up for international shipping updates at www.repfitness.com/int-shipping

[@JR-nh2se]

**Do not buy the lower hight if you are over 6ft and plan on squating towards the name plat** total design flaw. You will not be able to unrack the weight. The "REP" sign logo gets in the way. It's to low.

[@rambojohn7118]

I just bought the PR-4000 Rack and bought the Lat / Low Row Pull Down system. My question is does that Stabilizer come with the Lat pull Down system as it states in Red on the description of the lat pull down. It’s confusing because there’s one with the stabilizer and one without the stabilizer! I got the one without the RSB but in the description as I already stated Reps description states that the Stabilizer bar comes with the Lat Pull Down. Can you please let me know ! Thank you

[@REPfitness]

Which option did you select? It's important to choose the one that fits your needs, based on height and necessity of an RBS (read base stabilizer) www.repfitness.com/strength-equipment/rack-attachments/pr-4000-attachments/rep-pr-4000-lat-low-row-attachment

[@rambojohn7118]

Rep Fitness This is what the description of the Lat pull down states - “Improved lat pull-down/low-row with foot brace to help brace legs during low row. *LAT/LOW ROW UNIT SOLD ON THIS PAGE ALSO INCLUDES THE REAR BASE STABILIZER.” This is what I bought “PR-4000 Lat/Low Row Attachment - 93"” If you read the PRINT in RED it stars as if the Stabilizer comes with the Lat pull down. www.repfitness.com/strength-equipment/rack-attachments/pr-4000-attachments/rep-pr-4000-lat-low-row-attachment

[@rambojohn7118]

If you read the full description it states that the Rear Stabilizer Brace is included with the purchase of the Lap pull down. www.repfitness.com/strength-equipment/rack-attachments/pr-4000-attachments/rear-base-stabilizer

[@REPfitness]

@@rambojohn7118 It is referencing the PR-4000 build out page. Do you see the options on the page I linked? It is pretty clear on that page. If you already placed an order, I can look at it. Thank you

[@rambojohn7118]

Rep Fitness I placed my order a few days for the PR-4000 rack and the PR-4000 Lap Pull Down System. I need the RBS and I was under the impression when I placed my order that the RBS came with the Lat Low Row System but I guess it doesn’t with my Lat Low Row option that I picked. if it doesn’t I’ll need the RBS and it’s out of stock. I canceled my Rogue order and went with Rep fitness I think you have just as good of a product and I like the fact that you offer the Lat Liw Low. I’ll need the RBS but it’s out of stock. It can be months to get that Rear Brace Stabilizer!

[@brandanspears3900]

Amazing product ... Is there a waiting list for the next availability? .. Would like to get a 80' REP PR-5000 V2 Power Rack.

[@REPfitness]

We are looking at pre-orders once we have confirmed solid amount available. Probably opening up in 2-3 weeks - keep an eye out for an email or social post.

[@esrujan]

Can you/Do you ship orders of this to Canada?

[@REPfitness]

Our goal is this June/July!

[@esrujan]

@@REPfitness Great thanks so much for the response. So, I believe I have to wait until then to make the order.

[@gteam2]

Australian distributor?

[@scarrington]

@repfitness Will the Rogue Adjustable Monolift fit on this rack?

[@REPfitness]

We have our own adjustable monolifts dropping in just a few months!

[@scarrington]

@@REPfitness Boy, you guys rock!!! When all this Corona insanity dies down, I'm ordering the Pr-5000 with the weight storage, the lat row attachment, the belt squat, the safety straps (for squatting inside the rack), the monolift, the half safeties on the front of the rack (for bench press), the globe pull up bars, band pegs, 2 leg rollers, and the landmine... 80" Red with black cross members & accessories. lol... So you can start tossing that in a box now! 😄

[@REPfitness]

@@scarrington Awesome to hear! We can't wait to open up and meet the demand that is coming! Also, you'll have some amazing attachments coming in the next several months to add to your rack too!

[@rperez0406]

What size socket is used for the 1" bolt?

[@REPfitness]

Size 36mm or an 1 7/16"

[@Didewro]

Can this be ordered in the low ceiling version?

[@REPfitness]

80" uprights is a great option for shorter ceilings!

[@Herdedsheep]

Wow We dont have anything like this in England Do you ship to UK ?

[@REPfitness]

Hey! At this time, we only ship to the lower 48 in the States. But you do have the option of using a freight forwarder! Our goal is to be in Europe in 2021.

[@MichaelOrr1984]

Can anyone recommend a company to ship Rep equipment from America to London, England? Got quotes from a few companies that topped a Google search and they all quoted circa 6k GBP to ship a 500kg pallet (I assume rack, plates, etc for full gym setup would weight about that much). This is more expensive than the cost of the equipment. :(

[@nathanburk5321]

Is this the 30” or 41” crossmember depth?

[@REPfitness]

41" cross member depth. 47" depth upright to upright. About 50" footprint (the feet). You can check our website and it's the second photo in the scroller of photos that has ALL the dims of what each attachment will add, etc. It's a great reference point as you build out your custom rack.

[@dethsyl907]

Is it available in Canada?

[@REPfitness]

Great question! If you reach out to our Customer Service team, they can explain how freight forwarding works for getting this rack to Canada! Use the email: [e-mail]

[@Crhistofers]

The best 🤩👏👏👏👍😉

[@TheJuan2000164]

I would give anything to have this rack Iv saved almost 4K but there always out of stock. Not all the money in the world could get me one.

[@srt8up4shot]

Bro just get rouge with all that money all these top companies rep rouge sonorax make the best of the best. I hope u get ur dream rack tho

[@pablomarrero6062]

Could anyone tell me the actual weight of this rack?

[@REPfitness]

Hi Pablo - Since this rack is completely customizable, the weight will vary depending on the configuration that you choose. The weight will depend on upright height, rack depth, the inclusion of weight storage, as well as accessories you choose to include!

[@pablomarrero6062]

@@REPfitness Yeah, your CS agent emailed me and told me its over 300 pounds for just the base pr5000 v2. thanks

[@christiangeorge358]

Is your lifting equipment made in the United States?

[@REPfitness]

We manufacture globally. All of our gear comes from all over, and it could change year to year. We source the best quality and price since it's mostly machine welding/cutting/bending for this type of gear. We always design our equipment in-house in Colorado, along with our logistics, customer service, sales reps, warehouse team, managers, etc.all in Denver Colorado.

[@leadpaint1969]

Dig it.

[@extrasmack]

Will you be making a version of this exact rack in 7gauge steel? I've been wanting precisely this rack design. It has all of the features and available accessories I'd personally design into it, other than being the now typical 3x3 11ga. Used to be a few manufacturers that made 7ga. racks, including Rogue and Sorinex. Now you can't find a heavier than 11 ga. Traditionally styled 3x3 rack anywhere. If REP builds it you'll be the only company currently carrying a true heavy duty home power rack anywhere.

[@REPfitness]

It's true... 7ga is rare... but that is because 3x3" 11ga with 1" hardware/pins is already SUPER over-built for fitness purposes. But it's the higher end industry standard, and it means you'll never have to upgrade again. As soon as humans start squatting 3,000 lbs, we will make a 7ga rack ;) Sorry Paul :(

[@extrasmack]

@@REPfitness Fair enough.

[@bitcoindaddy748]

༼ つ ◕_◕ ༽つ GIVE ME THAT

[@Astarothpool17]

This is like watching porn right now...