If this video helps you, please leave me a thumbs up, and don't forget to subscribe for more.
@sherriegaston23816 жыл бұрын
Trent hi
@paulcavanaugh57816 жыл бұрын
Trent 6
@vicentapozollorens10126 жыл бұрын
Trent i
@dhcourier6 жыл бұрын
Great video. A bit of advice. Take a 1200 grit sandpaper and rub the cracks Then do exactly what you did but this time use a blow dryer on hot for a few seconds. What that does is makes the glue a bit easier to fill those really small cracks then wait 10-15 min like u did. This also works great on car windshields. If you have a crack from top to bottom. This will fix it I also call this glue. Instant glass. Good luck. Great video.
@dhcourier6 жыл бұрын
Also. Use a 1200 1500. 2000 and 3000 grit papers and polish your glass. The friction from these very very fine sand papers will heat up the glue and the glass and will become one.
@billkelly18155 жыл бұрын
Who's watching this video with his smashed phone 😢😢
@ellaella66085 жыл бұрын
✌️
@laxsaar17605 жыл бұрын
Wassup gang 🤘👌
@SharonHenninger5 жыл бұрын
🙋
@531cuk4 жыл бұрын
👋✊
@bernlin20004 жыл бұрын
Curved glass too 😥 I don't think this would be a good idea with a curved screen, too much of a gap between the glass and the LCD panel, I'd be afraid this stuff would drip inside, and damage the actual display.
@samscrivner476 Жыл бұрын
You should take a heat gun or if you don’t have access to a heat gun then use a hair dryer, everyone has a hair dryer around the house. The heat help thin the compound allowing it to fill the smaller cracks and also makes all of the air bubbles rise to the surface. Without applying the extra heat the an epoxy, glue or other adhesive compounds you run the risk of not completely filling and sealing the desired area. So if possible always use extra heat when pouring a sealant or adhesive and you won’t have to worry about air bubbles being trapped throughout the glue, the compound will thin out and fill smaller cracks and spaces more easily and leave you with a clear glass like product.
@danielcalvo46355 ай бұрын
Do you think epoxy is still the best way to go about fixing those cracks?
@montinaladine32642 жыл бұрын
Good video and results. Some advice though for an even better (less noticeable) repair) is a very important step that I think you completely missed. And one that is essential for a device which has been handled hundreds of times by hands. CLEANING preparation! That screen needs to be properly cleaned with alcohol - I can't think of anything else that would work as effectively. Not poured in, so it could get under the glass and damage or stain something, but rubbed in well into the damage and all around so that the resin will bond even better than in this video. Hands and fingers have natural oils and that will be ALL over that glass and in the cracks as well. You need to remove that oil film and grubbiness first.
@kathryns52635 жыл бұрын
It's hard to see the video through the cracks on my phone.
@Douglas464614 жыл бұрын
Lol
@playground21533 жыл бұрын
Same here
@aaronwalderslade3 жыл бұрын
I was going to use that exact sentence. 😁
@Dr_VixАй бұрын
😂😂
@drakedorosh93325 жыл бұрын
I love videos where the poster actually speaks.
@Kb1ltg6 жыл бұрын
A common playing card cut down the middle makes a nice smoothing tool instead of the plastic knife. Well done. I use epoxy for most everything.
@theautodan70953 жыл бұрын
Im just learning about this wonder goo. Will be using it on everything now...!!!
@ObscuriaDragunAed Жыл бұрын
those gas station loyalty cards work wonders for this and lots of other stuff too. I snag a few different types at every gas station I can for whatever occasion I need, from jimmying my door to acting like a spreader or squeegee, can't underestimate the versatility of a playing card or various thickness and material loyalty cards.
@RaymondLohengrin3 жыл бұрын
From RC model building experience this epoxy tip. After applying the epoxy, cover with clear packing tape and press as flat as possible. Once dry the surface will be as smooth as glass.
@stranger07.443 жыл бұрын
Perfect, been wondering what to do on the truck bodies that I bash with
@MechanicWelder94 Жыл бұрын
Sticky side up (away from screen, non sticky side toward screen)? Does the tape come off clean? Or are you saying leave it on???
@SerenoOunce Жыл бұрын
Idea is to get the epoxy *in* the glass, not sitting on top. Not practical for screen repair.
@intothevortex78255 жыл бұрын
Get a baby proof silicon cover and a glass screen protector. Problem solved
@lauriecabbage294 жыл бұрын
That is exactly what I plan to do....Im not slopping Glue on my phone...
@sauzxiestsauce39394 жыл бұрын
The glass is already broken
@natdad00114 жыл бұрын
I'm crying so hard right now please please please work my parents are coming home any soon 😭😭😭
@xcodydoe4 жыл бұрын
Did it work?
@mystique26274 жыл бұрын
The sound of the dog drinking water at the beginning 😊
@odonovan2 жыл бұрын
While you were "smoothing" the epoxy, I kept wondering why you didn't use the back (SMOOTH side) of the knife. 😁
@rambam694 жыл бұрын
Looking at your cracked screen with my cracked screen *Crackeption*
@vanskis76183 жыл бұрын
Looking at this comment with them looking at the cracked screen with their cracked screen with my cracked screen while on crack
@Really2u3 жыл бұрын
This was great. Anything that stops the spider cracks is a winner. Those just continue to grow. They drop fine pieces of glass. This fix stops them. That is really cool. Watched a few of your videos. You have a nice professional voice. A great instructor teaching style. Have you taught anywhere before? Just wondering. I just get that from your videos. Great job. Look forward to watching more. I now have a phone with edge cracks. I just want to use it as a tablet. I think this might be perfect. Thank you. Keep making great videos.
@thomas-fq1wi4 жыл бұрын
I've been doing that for ages, 2 x parts araldite with a wee spot of black paint dripped in and mixed, fill the broken bit and Bob's yet uncle
@vladuk44843 жыл бұрын
Thanks now my iPad don’t work.
@tassiemurdock28934 жыл бұрын
I used that glue with the blue light to cure it and it lasted on my phone for over a year. I pressed it down into the cracks then wiped excess off screen before i set the glue. I had little cracks up to chunks of glass missing...worked light magic
@chakawaka40494 жыл бұрын
Thanks for the tip👍
@Danielle-ii8zc4 жыл бұрын
It worked for u
@tnargskoorb12 жыл бұрын
I just tried that and it worked great. Thanks a lot. Gives you time to work it without it drying before you hit it with UV light.
@matstarlinggiantupdate8484 жыл бұрын
Take minutes of silence for kids who tryed this
@muhammadsaeedkhan19305 жыл бұрын
Good job ....If u use the depoxi instead of empoxi on black area of tab...if need good finishing first depoxi and then epoxi over it ....then broken line will not b visible....
@ArjayMartin4 жыл бұрын
WHat is the difference? THanks.
@coywilson6966 жыл бұрын
Thanks for that amazing video. I would really like to see the video that you said you were gonna use the glass resin on. I've liked and subbed. Thanks again for the great video and info.
@Believe302 жыл бұрын
My problem is, It cracked under the screen protector...any solutions?
@Caine19574 жыл бұрын
Great! Had exactly the same damage to the corner area except I am 62 and not 5!!! Thanks for this.
@TrentPierceProjects4 жыл бұрын
Luckily it works for all ages. Thanks for watching
@stranger07.443 жыл бұрын
Weird brag, but... ok
@bawlash72922 жыл бұрын
В таких случаях эпоксидную смолу надо разводить ацетоном. Тогда клей легко затекает во все щели, меньше расход и легко удалить лишнее. Видео сильно затянуто, все можно было показать короче.
@PaDutchRunner3 жыл бұрын
This is why you use B-7000 instead of this stuff. B-7000 is self-leveling, eliminating the need for the razor blade treatment. It also comes with a precise applicator which precludes the "nuclear" treatment as shown in this video.
@ottovuorio3824 жыл бұрын
Why all the fucking dislikes?? This is what I absolutely hate about people. They don't think logically, they don't even try it out for themselves, nor ask someone else if it worked or not, propably don't even watch the video and automatically say it's a bad idea and keep going by the endless dogmatic bullshit.
@dennissitnikov51703 жыл бұрын
it is better to use B-7000 (Chinese) or Moment Crystal glues. EPOXY looks UGLY )))
@offairhead3 жыл бұрын
Safety rule: NEVER EVER EVER cut TOWARDS any part of your body, as you did here in this video. Always only cut away from yourself.
@vanskis76183 жыл бұрын
thx
@KarazyKidAtHeart4 жыл бұрын
Your fingernails or lack there of make mine hurt! Thanks for the info, I got a phone I'm gonna give this a go! Thanks
@bunsdad45305 жыл бұрын
I'd probably add a bit of heat or a drop of lacquer thinker to make it runny. Or I would use the UV curing glue, it is very runny, but good job.
@TrentPierceProjects5 жыл бұрын
Thanks! I may try that in a future video
@john197996 жыл бұрын
Handy tip but for $30 on ebay i would rather just replace the screen
@eclipsesh65675 жыл бұрын
That's 120...
@patrickscheidegger37145 жыл бұрын
A squeegee for screen printing works BEST. Available at any art supply store... And POLYCRYLIC (spray or liquid, but LIQUID WORKS BEST) available at any hardware store... That’s what we use to fix the glass on the BIG SOLAR PANELS at the farm... Also how I’ve fixed countless screens for my clumsy friends... OR you can use those “Safelife”-type windshield repair kits, that they sell at any auto-parts store - but those are pricey...
@larryadkins47662 жыл бұрын
Im trying this
@MrBobWareham5 жыл бұрын
In England they have car screen repairers that under insurance will come out and repair a stone chip on the front car screen and this is done under pressure where the hole is cleaned and then pressure filled with a clear epoxy filler then polished so you cant see the chip. Bob in the UK
@davidran93175 жыл бұрын
Hello mate!
@tonakomk4 жыл бұрын
my glasses cracked from top to down straight
@home_Grown_studio5 жыл бұрын
Always try to push the blade away from you VS towards yourself. Scraping the screen requires pressure. A good glass paint scraper works best and safer
@yourdailyperson98813 жыл бұрын
It's a butter knife-
@stranger07.443 жыл бұрын
@@yourdailyperson9881 hes not talking about that🤦♂️
@docholliday5142 жыл бұрын
@@yourdailyperson9881 hum
@ph0t0dave Жыл бұрын
LOL I was cringing pretty bad when he was scraping away the epoxy with the razor and pulling it toward his fingers and arm. All I could think was please dont slip, please dont slip, please dont slip...
@detectivetacco20853 жыл бұрын
epoxy + black permanent marker ,best combo
@kafeezageorge97273 жыл бұрын
How do I use it with black permanent marker?
@toddsk19616 жыл бұрын
I don't condem you...keeping kids equipped with tech can drain you
@calvinatdrifterstudio84385 жыл бұрын
Put some loca 2500 on top with a tempered glass screen protector.
@simplyanuhanna Жыл бұрын
I was able to do this to one of my phones and then put a tempered glass protector over it. This was an easy fix, thank you!
@CJhakidogidogs6 жыл бұрын
Did I hear it correctly " If your hearing cracking sounds that is my dog Loli "
@TrentPierceProjects6 жыл бұрын
Yes, lol. Her name is Lolly, and she loves to walk across my hardwood floor as I'm recording a video. It causes the clicking noise in the background.
@kevinkelly15295 жыл бұрын
*you're
@ldchappell12 жыл бұрын
My experience with Gorilla Glass has been great. I've dropped my cellphones many times but I've never experienced a cracked screen.
@k97rahul2 жыл бұрын
Try dropping it on concrete roads. I have, that's why I'm here. 😅
@tannergrinzel183517 күн бұрын
@@k97rahulif you are dropping it on concrete roads get a case because curved edges crack and and also scratch
@sandracoric28146 жыл бұрын
O MY FRAKING SHIT 666 DISLIKES HOW FUCKING DISLIKE IS THAT
@TrentPierceProjects6 жыл бұрын
Sandra Coric spooky isn't it.
@raybois4 жыл бұрын
Next video: How to repair embarrassing gnawed fingernails using handcuffs (3 months method).
@marilyncruz10306 жыл бұрын
Love this idea!,,,
@TrentPierceProjects6 жыл бұрын
Thanks for watching!
@kenshanekentot70234 жыл бұрын
Did it work to you
@xxXxXxGxXxXxx3 жыл бұрын
Just paint the boarder black now
@RaymondLohengrin4 жыл бұрын
Place a piece of paper wax paper or clear tape over the epoxy and once dried and removed it will be smooth as glass and no need to sand it. I use this technique to make RC model airplanes.
@larryadkins47662 жыл бұрын
How much epoxy
@profdleeucc9 ай бұрын
One can also use the yellow captan tape that is semi-opaque yellow colored non-stick non-conductive tape that when removed the glass will be completely smooth without having the need to sand it.
@MasterMindWC6 жыл бұрын
You need to put the phone or tablet in a vacuum to complete the repair. Once you apply the epoxy, put it in a vacuum and suck all the air out and then let sit. The epoxy will be sucked into the cracks and reduce the viability of the cracks.
@sebastianmunteanu86836 жыл бұрын
Try not to put li-poly battery in the vacuum thoe ;)
@iwanttosuckyouoffand94376 жыл бұрын
Patrick Keefer was that a joke?
@thexyzer6 жыл бұрын
Patrick Keefer let l
@jerrysimpson84346 жыл бұрын
Patrick Keefer ooo
@marcolascaraky39155 жыл бұрын
Bancmat card is better than a plastic knife. The operationi is to do in the vacum.
@rwgreene9992 жыл бұрын
What happens if you put this on part of the touch screen that you use? Will touching buttons still work?
@abstractfactory8068 Жыл бұрын
I'm thinking probably not, hopefully there was a functional demonstration.
@Man-Chan5 жыл бұрын
just wanted to say that it would have been much easier to remove most of the excess epoxy if you used the razor within the 5 allotted minutes . around the 3-4 minute mark after mixing the 2 parts its no longer runny but still soft enough to cut/scrape .
@TrentPierceProjects5 жыл бұрын
I was afraid it would pull some of the other epoxy out of the crack if I didn't let it fully dry first
@whourdadie4 жыл бұрын
@@TrentPierceProjects It's POSSIBLE it pulls loose/up some when trying to cut it with the razor after it sets too. Maybe do another video trying both ways to see which worked easier???
@TrentPierceProjects4 жыл бұрын
@@whourdadie I may have to revisit this one just to try that. Thank you
@stiggslr4 жыл бұрын
I desperately need to do my screen, I first, had one fine crack from top to bottom, but I dropped it & there's more now. I noticed in the video that you bite your fingernails....R.E.L.A.X....
@Danielle-ii8zc4 жыл бұрын
Lol 😂😂
@miamilady22784 жыл бұрын
No way just go to the geek squad at best buy and get it repaired if its under apple care and warranty.
@jsinprtn295 жыл бұрын
Lol use the back of the serrated knife, it's a flat edge!
@patrickcolt34634 жыл бұрын
Silly people! LMAO
@gkop95745 жыл бұрын
can you do this, with a shattered screen and see if still works
@edelweisslandscape4 жыл бұрын
u cannot fix the visual crack, coz most crack on phone display made from hit and pressure from outside so the real crack is the inside.
@natashawillis705610 ай бұрын
Dude you sound just like "Hax-Man" 'Sept (& seriously bro, no offense here) you sound like the bored, sad version of him.. Check him outs, it's crazy-sauce home-fry! Or maybe it's spelled,, "Hacks Man" ?🤔 I dunno,, he's fun-stuffs though. A smart fella w great-big morals and a sturdy, supportive & silly family :)
@ObscuriaDragunAed Жыл бұрын
My fat ass (metaphorically, I'm underweight actually) just cracked the back glass to my Aura Glow Note 10 plus... Looking at the alternatives the thought hit the shade mechanic in me and I thought "Why the hell do I want to replace this with after market and compromise it?" Then this video appeared. Probably going this route, torn between this and maybe a UV repair kit, but, not investing a ton of time fixing cosmetic back glass.
@MrSanguru4 жыл бұрын
Great fingernails - COMPLIMENT!!! And not even the slightest feeling of shame! Man, listen, that is disgusting. I would not allow you to touch me. TERRIBLE!!!!!
@jefferyragland11746 жыл бұрын
Try using rainx glass repair epoxy
@jessicaquarrells36875 жыл бұрын
I will try that thanks 🙂
@stardvl4 жыл бұрын
@@jessicaquarrells3687 did it work ?
@ElekZoliSopron2 жыл бұрын
Gorilla Glass 6 Refractive Index (590 nm) Core Glass 1.50 Use the right glue ... ehhh... :(
@lizanneleonard81914 жыл бұрын
Would using the flat side of the knife rather than serrated side have worked better as you said you wouldn't normally have used a serrated edge coz all I have is one of these knives
@albertopintorchapa5 жыл бұрын
Pintor automóvil muy bueno tú trabajo siempre veo tú vídeos saludó de Argentina maestro
@hasansari58826 жыл бұрын
Hi Trent, i would like to ask you if this tool works for samsung a8
@WillAustinEsq6 жыл бұрын
So I have hairline cracks on my screen that are not as severe as those in your tutorials. You have three methods I believe super glue, epoxy, and nail polish. Which is the better method? Also, regarding the comments that you were a bit carefree with the razor, I agree -- wear gloves and secure the phone. That said, If you do cut yourself, wipe off the blood the pour super glue on it. Super was invented as an emergency battlefield suture. Then you'll good to go.
@SerenoOunce Жыл бұрын
@@NARUTO-ho9mc You always point the blade edge *towards* you. You have very little control pushing as opposed to pulling.
@andrewmcn4212 жыл бұрын
Would this render the touch sensitivity less sensitive ?
@Lolee2771 Жыл бұрын
Good grief man get some sort of handle for that razor! The whole time you were scraping I was holding my breath bc I just knew that you would slice your finger open.
@javiiermendes5 ай бұрын
If it is true, the 2-part epoxy is used to repair a screen that still works with the touch screen. Seal the crack so it doesn't break, but it's not a long-term thing. It's just so you can use it for a while when you buy the screen or another phone.
@dhcourier6 жыл бұрын
One last comment. A car window repair kit is another good way to fix your iPhone 📱 or smartphone
@TrentPierceProjects6 жыл бұрын
Devrek Wassupi I also made a video doing that.
@marioysikax4 ай бұрын
"but many phones just about every tablet you're gonna have this border around your screen" 6 years later, borders are gone.
@jamesflannery-serle34894 жыл бұрын
Scraping like that towards your arm, I held my breath.
@tannergrinzel1835Ай бұрын
It has dual ion glass so it won't cut the screen
@DR_SOLO6 жыл бұрын
Leap Frog Toys for children , and they do not break.
@marcinturkey72315 жыл бұрын
Why don't you rest it on a towel so it doesn't move around...but still nice
@ldchappell12 жыл бұрын
I'm amazed that the tablet belongs to a five year old. Does a 5 year old child have the knowledge to use such a device?
@immereeree48573 жыл бұрын
Its cool but I did kinda cringe
@TrentPierceProjects3 жыл бұрын
I cringe at my old videos too. Thanks for watching though.
@immereeree48573 жыл бұрын
@@TrentPierceProjects I know it works but I cringed at putting stuff that is not made to do this on an expensive screen so yeah
@edwardandrade43905 жыл бұрын
Opps that's all he had in hand so the he could have us the other smooth side
@chapelchicks88513 жыл бұрын
Exactly what I thought!
@stuartfederman86462 жыл бұрын
Your methods sucks for phones just buy tempered glass screen protector which will do the same thing without the mess
@pepepipi87024 жыл бұрын
I broke galaxy s2 screen ,worse is ni image is present...i guess theres nothing to do to it
@edpierrot87414 жыл бұрын
Why that way there's lots of other ways I'm not trying to be mean but there's lots of other ways to do it just give me screen!
@samstars96236 жыл бұрын
I like excellent very useful too know....Thanks that for great tip
@princessharbnger21863 жыл бұрын
You couldve used the flat side of the knife 😅 new sub here
@NoxmilesDe4 жыл бұрын
Well. I bought epoxy for glass. But it's not transparent. Shit.
@shanjoybud3 жыл бұрын
I love the sound of the dog eating and drinking!
@TrentPierceProjects3 жыл бұрын
Thank you. She was a wonderful dog. RIP Lolly
@johnmilner76032 жыл бұрын
Use a credit card for a squeegee and never pull a blade towards you for obvious reasons.
@danyell48706 жыл бұрын
buy her a kids tablet bumper case or otter box lol
@melindadawn55 жыл бұрын
Or, at 5... Don't give her a tablet, or cellphone. Unless you want her to become infertile, get cancer, damage her eyesight, destroy her short and long term memory, destroy her sleeping abilities, alter her moods, basically, compromise her entire system all together.... ...
@oneoflokis5 жыл бұрын
That's ace! Very simple: wouldn't have dared trying it first though!! 😁 Probably will attempt on an old phone.
@groovefretboard3 жыл бұрын
Just call Verizon they will send a guy to your house and replace your screen for $29!!!! Then put a blue light screen protector on it. Problem solved. Here’s a tip. Get a blue light screen protector. Really eliminates glare smooths out screen as well. Reduces scratches as well. Wish I bought 1 when my phone was new.
@stevenscott20132 жыл бұрын
Ten film to lipa jest. Połowa żywicy się oderwała. Powodzenia z amerykańską technologią.
@scotexscarrier84616 жыл бұрын
oooops my blade slipped slashed my thumb open,,now ive got claret all over my mums brand new beige carpet
@nickpickerwi77876 жыл бұрын
scot Ex scarrier wtf is claret?
@Furt0riginal6 жыл бұрын
No problem! you still have left nine fingers yet!!
@pappaclutch32665 жыл бұрын
Put epoxy into the wound to seal it off
@FR3A5H-066 жыл бұрын
Wow this is awesome
@bal9717 Жыл бұрын
Nail clipper and pull the prongs up and back better than that tiny screw driver.
@aviendha8400 Жыл бұрын
mi celular tiene in hueco en el vidrio del teléfono, en un borde, y no puedo obtener un repuesto, puedo usar acrílico de uñas para tapar el hueco para prevenir la humedad? Gracias
@supamoe20226 жыл бұрын
What happens if it's the touchscreen and not the edge will I still be able to touch?
@MrsQuietMusic4 жыл бұрын
My excact thought! 👍
@orlandosantimateo74164 жыл бұрын
Q bien
@johndale77762 жыл бұрын
Ways to improve/repair a cracked phone screen...uhh..and ways not too.
@bretthermance81543 жыл бұрын
UM....segregated knife. Gee flip the knife around to the flat side. LOL
@FixItYerself Жыл бұрын
who's watching this with a cracked Galaxy Edge screen?
@howon48864 жыл бұрын
dum
@L.SPARROW583 жыл бұрын
Er...... the other side of that plastic knife IS straight isn't it? 🤔
@hotmusclesmagazine49594 жыл бұрын
For the black borders add black color with the epoxy and it will be better
@TrentPierceProjects4 жыл бұрын
May have to give that a try. Thanks
@bunsreng85523 жыл бұрын
So It's better not to let your device glass broken at the first place.
@craigbrowning94483 жыл бұрын
5 Minute Gap Filling Epoxy Permatex Brand.
@deewilliams49803 жыл бұрын
stop chewing your fingernails...gross...but good video
@fabiofundaro23314 жыл бұрын
this video is bad.......unprofessional.....and the result is terrible as well......